# agent_conversation_messages

id: 019d773f-0d44-72e6-bc1a-dca0d795ffee
conversation_id: 019d773e-c4a6-703d-84a8-7b55652346b2
user_id: i302573
agent: App\Ai\Agents\CustomAgent
role: assistant
attachments: []
tool_calls: []
tool_results: []
meta: {"provider":"openai","model":"gpt-4o","citations":[]}
created_at: 2026-04-10 13:55:14
updated_at: 2026-04-10 13:55:14
content:
  Het lijkt erop dat je een functie wilt schrijven om de ingelogde gebruikersnaam op te halen. Hier is een voorbeeld van hoe je dat kunt doen in PHP:

  ```php
  public function getUserName(): string {
      // Stel dat je de gebruikersnaam in een sessie opslaat
      if (isset($_SESSION['username'])) {
          return $_SESSION['username'];
      }
      // Voer een alternatieve actie uit als de gebruiker niet is ingelogd
      return "Gast"; // of een andere standaardwaarde
  }
  ```

  **Uitleg:**

  - **$_SESSION**: Dit is een superglobale array die vaak wordt gebruikt om gebruikersinformatie op te slaan tijdens de duur van de sessie.

  - **String return type**: De functie geeft een string terug. In dit geval de gebruikersnaam of een standaardwaarde als de gebruiker niet is ingelogd.

  - **Controle op ingelogde status**: Voordat de gebruikersnaam wordt geretourneerd, controleert de functie of er überhaupt een gebruikersnaam is ingesteld in de sessie.

  Let op dat je sessies moet starten met `session_start();` voordat je sessievariabelen kunt gebruiken. Laat weten als je verdere hulp nodig hebt!

usage:
  {"prompt_tokens":330,"completion_tokens":254,"cache_write_input_tokens":0,"cache_read_input_tokens":0,"reasoning_tokens":0}


id: 019d773f-3cbd-7370-8f10-681ebeeb5692
conversation_id: 019d773e-c4a6-703d-84a8-7b55652346b2
user_id: i302573
agent: App\Ai\Agents\CustomAgent
role: assistant
attachments: []
tool_calls: []
tool_results: []
meta: {"provider":"openai","model":"gpt-4o","citations":[]}
created_at: 2026-04-10 13:55:26
updated_at: 2026-04-10 13:55:26
content:
  Als je een functie wilt maken die de gebruikersnaam van een geauthenticeerde gebruiker retourneert, kun je dit doen op basis van je authenticatiesysteem. Hieronder een voorbeeld waarbij we ervan uitgaan dat er een authenticator of gebruikersobject is dat die informatie biedt:

  ```php
  public function getUserName(): string {
      // Voorbeeld van het gebruik van een authenticator
      if ($this->authenticator->isAuthenticated()) {
          return $this->authenticator->getUser()->getName();
      }
      // Alternatief als de gebruiker niet is geauthenticeerd
      return "Gast";
  }
  ```

  **Uitleg:**

  - **isAuthenticated()**: Controleert of de gebruiker momenteel geauthenticeerd is.

  - **getUser()** en **getName()**: Stel dat de `getUser()` methode een gebruikersobject retourneert en `getName()` de naam van die gebruiker.

  - **$this->authenticator**: Dit is een verondersteld object of eigenschap in je klasse die verantwoordelijk is voor authenticatiebeheer.

  Houd er rekening mee dat je de juiste interfaces en methoden moet gebruiken op basis van jouw specifieke setup. Laat het weten als je verdere aanpassingen of verduidelijkingen nodig hebt!

usage:
  {"prompt_tokens":593,"completion_tokens":262,"cache_write_input_tokens":0,"cache_read_input_tokens":0,"reasoning_tokens":0}


id: 019d773f-56c5-710e-a085-52af7e1cd992
conversation_id: 019d773e-c4a6-703d-84a8-7b55652346b2
user_id: i302573
agent: App\Ai\Agents\CustomAgent
role: assistant
attachments: []
tool_calls: []
tool_results: []
meta: {"provider":"openai","model":"gpt-4o","citations":[]}
created_at: 2026-04-10 13:55:32
updated_at: 2026-04-10 13:55:32
content:
  Natuurlijk! Hier is een eenvoudigere versie waarbij we een veronderstelde `AuthenticatedUser` klasse gebruiken:

  ```php
  public function getUserName(): string {
      // Controleer of de gebruiker is ingelogd
      if (AuthenticatedUser::isLoggedIn()) {
          return AuthenticatedUser::getName();
      }
      return "Gast";
  }
  ```

  **Uitleg:**

  - **AuthenticatedUser::isLoggedIn()**: Controleert of een gebruiker momenteel is ingelogd.

  - **AuthenticatedUser::getName()**: Haalt de gebruikersnaam op van de ingelogde gebruiker.

  Dit gaat ervan uit dat `AuthenticatedUser` een statische klasse is die deze methoden biedt. Zorg ervoor dat je deze methoden en klasse aanpast aan je eigen applicatiestructuur. Laat het me weten als je meer hulp nodig hebt!

usage:
  {"prompt_tokens":865,"completion_tokens":178,"cache_write_input_tokens":0,"cache_read_input_tokens":0,"reasoning_tokens":0}


id: 019d773f-8007-7021-aba6-3733fbfe9169
conversation_id: 019d773e-c4a6-703d-84a8-7b55652346b2
user_id: i302573
agent: App\Ai\Agents\CustomAgent
role: assistant
attachments: []
tool_calls: []
tool_results: []
meta: {"provider":"openai","model":"gpt-4o","citations":[]}
created_at: 2026-04-10 13:55:43
updated_at: 2026-04-10 13:55:43
content:
  Als je een functie wilt maken om de naam van de ingelogde gebruiker op te halen en daarbij het gebruik van een `return` wilt vermijden, kun je direct de naam weergeven of gebruiken binnen een andere context. Hier is een aanpassing:

  ```php
  public function printUserName(): void {
      // Controleer of de gebruiker is ingelogd
      if (AuthenticatedUser::isLoggedIn()) {
          echo AuthenticatedUser::getName();
      } else {
          echo "Gast";
      }
  }
  ```

  **Uitleg:**

  - **printUserName(): void**: Deze functie heeft geen returnwaarde, maar gebruikt `echo` om de naam direct af te drukken.

  - **isLoggedIn()** en **getName()**: Dezelfde veronderstelde statische methoden worden gebruikt om te controleren of de gebruiker is ingelogd en de gebruikersnaam op te halen.

  Dit is nuttig wanneer je bijvoorbeeld de gebruikersnaam rechtstreeks op een webpagina wilt tonen zonder deze eerst in een variabele op te slaan. Laat het me weten als je hier meer over wilt weten!

usage:
  {"prompt_tokens":1057,"completion_tokens":227,"cache_write_input_tokens":0,"cache_read_input_tokens":0,"reasoning_tokens":0}


id: 019d773f-81a1-7054-a891-54c3d25abde2
conversation_id: 019d773a-d685-71b2-883e-d9254c665f0a
user_id: i303186
agent: App\Ai\Agents\CustomAgent
role: user
attachments: []
tool_calls: []
tool_results: []
usage: []
meta: []
created_at: 2026-04-10 13:55:43
updated_at: 2026-04-10 13:55:43
content:
  en dit?   private void PatientListView_SelectionChanged(object sender, SelectionChangedEventArgs e)
    {
        if (PatientListView.SelectedItem is CareTracker.Data.Patient selectedPatient)
        {
            PatientDetailsPanel.DataContext = selectedPatient;
        }
    }


id: 019d773f-81aa-70d0-85cf-552f1176ccdd
conversation_id: 019d773a-d685-71b2-883e-d9254c665f0a
user_id: i303186
agent: App\Ai\Agents\CustomAgent
role: assistant
attachments: []
tool_calls: []
tool_results: []
meta: {"provider":"openai","model":"gpt-4o","citations":[]}
created_at: 2026-04-10 13:55:43
updated_at: 2026-04-10 13:55:43
content:
  Je kunt de `PatientListView_SelectionChanged`-methode inderdaad eenvoudig houden. De methode zorgt ervoor dat, wanneer een patiënt in de lijst wordt geselecteerd, de details van die patiënt naar een ander deel van de interface (zoals `PatientDetailsPanel`) worden gestuurd. Er is niet veel aan te passen zonder de functionaliteit te veranderen, maar hier is een iets compactere versie:

  ```csharp
  private void PatientListView_SelectionChanged(object sender, SelectionChangedEventArgs e)
  {
      // Controleer of er een patiënt is geselecteerd en stel de details in.
      PatientDetailsPanel.DataContext = PatientListView.SelectedItem as CareTracker.Data.Patient;
  }
  ```

  Deze versie maakt gebruik van directe typecasting zonder de `if`-structuur. Als `SelectedItem` geen `Patient` is, gebeurt er niets, wat in veel gevallen acceptabel is. Zorg ervoor dat dit gedrag altijd correct blijft in de context van je applicatie.

usage:
  {"prompt_tokens":1443,"completion_tokens":196,"cache_write_input_tokens":0,"cache_read_input_tokens":1792,"reasoning_tokens":0}


id: 019d773f-b00e-7299-9bca-81785c624419
conversation_id: 019d7736-c593-71f7-99f9-b99b584c0d8b
user_id: i302789
agent: App\Ai\Agents\CustomAgent
role: assistant
attachments: []
tool_calls: []
tool_results: []
meta: {"provider":"openai","model":"gpt-5-mini","citations":[]}
created_at: 2026-04-10 13:55:55
updated_at: 2026-04-10 13:55:55
content:
  Je hebt gelijk dat Livewire backend en frontend combineert — maar render() moet wél een blade-view (of view met data) teruggeven. Waarschijnlijk was je probleem dat je een anonieme klasse gebruikte en/of je view niet op de juiste plek of met de juiste data teruggeeft. Hieronder een kant-en-klare, werkende Livewire-component (klassieke opzet) plus view. Zet de bestanden exact zo neer en het moet werken.

  1) Livewire-component: app/Http/Livewire/BlogCarousel.php
  ```php
  <?php

  namespace App\Http\Livewire;

  use Livewire\Component;
  use App\Models\Blog;
  use Illuminate\Support\Str;
  use Illuminate\Support\Facades\Storage;

  class BlogCarousel extends Component
  {
      public array $blogs = [];

      // Livewire v2/v3 compatibel: type-hint optioneel
      public function mount(int $count = 3)
      {
          $this->blogs = Blog::with('user')
              ->latest()
              ->take($count)
              ->get()
              ->map(function ($b) {
                  return [
                      'id' => $b->id,
                      'title' => $b->title,
                      'blogger' => optional($b->user)->name ?? 'Unknown',
                      'description' => Str::limit($b->excerpt ?? $b->body ?? '', 140),
                      'image' => $b->image_path ? Storage::url($b->image_path) : asset('images/placeholder.jpg'),
                  ];
              })
              ->values()
              ->toArray();
      }

      public function render()
      {
          // returneer de blade view met de data (Livewire verwacht een view)
          return view('livewire.blog-carousel', [
              'blogs' => $this->blogs,
          ]);
      }
  }
  ```

  2) Blade view: resources/views/livewire/blog-carousel.blade.php
  (gebruik Tailwind + Alpine zoals eerder)
  ```blade
  <div
    x-data="{ posts: @json($blogs), active: 0 }"
    x-init=""
    class="relative max-w-4xl mx-auto"
  >
    <template x-for="(post,i) in posts" :key="post.id">
      <div x-show="active === i" x-transition class="flex flex-col md:flex-row bg-white rounded shadow overflow-hidden">
        <div class="w-full md:w-1/2 h-48 md:h-64 overflow-hidden">
          <img :src="post.image" :alt="post.title" class="w-full h-full object-cover" loading="lazy">
        </div>
        <div class="p-4 md:p-6 w-full md:w-1/2">
          <h3 class="text-lg md:text-2xl font-semibold" x-text="post.title"></h3>
          <p class="text-sm text-gray-500 mt-1" x-text="post.blogger"></p>
          <p class="mt-3 text-gray-700" x-text="post.description"></p>
          <div class="mt-4">
            <a :href="`/blog/${post.id}`" class="inline-block px-3 py-2 bg-indigo-600 text-white rounded">Lees meer</a>
          </div>
        </div>
      </div>
    </template>

    <button @click="active = (active - 1 + posts.length) % posts.length" class="absolute left-2 top-1/2 -translate-y-1/2 bg-white p-2 rounded-full shadow">‹</button>
    <button @click="active = (active + 1) % posts.length" class="absolute right-2 top-1/2 -translate-y-1/2 bg-white p-2 rounded-full shadow">›</button>

    <div class="flex gap-2 justify-center mt-3">
      <template x-for="(p, idx) in posts" :key="p.id">
        <button @click="active = idx" :class="active === idx ? 'bg-slate-800' : 'bg-slate-300'" class="w-3 h-3 rounded-full"></button>
      </template>
    </div>
  </div>
  ```

  3) Gebruik in je blade:
  ```blade
  <livewire:blog-carousel :count="3" />
  ```

  4) Checklist bij problemen
  - Zorg dat je component-classbestand in app/Http/Livewire staat en namespace klopt.
  - Zorg dat resources/views/livewire/blog-carousel.blade.php bestaat.
  - Zet @livewireStyles en @livewireScripts in je layout en laad Alpine.js.
  - Controleer of je Blog-model een user() relatie heeft en of de kolomnamen (image_path, excerpt) overeenkomen met jouw DB.
  - Als je Livewire v3 gebruikt: de bovenstaande code werkt ook; let op type hints in mount indien gewenst.

  Als je liever geen aparte blade-file wilt, kan ik je laten zien hoe je een inline Blade-string teruggeeft vanuit render(), maar dat is minder overzichtelijk. Wil je dat ik de inline-versie laat zien of wil je dat ik de code aanpas naar jouw exacte kolomnamen (plak je Blog-model)?

usage:
  {"prompt_tokens":2820,"completion_tokens":1916,"cache_write_input_tokens":0,"cache_read_input_tokens":0,"reasoning_tokens":768}


id: 019d773f-b52d-70b7-80fd-c5e5d50ca28a
conversation_id: 019d773e-c4a6-703d-84a8-7b55652346b2
user_id: i302573
agent: App\Ai\Agents\CustomAgent
role: assistant
attachments: []
tool_calls: []
tool_results: []
meta: {"provider":"openai","model":"gpt-4o","citations":[]}
created_at: 2026-04-10 13:55:57
updated_at: 2026-04-10 13:55:57
content:
  Zeker, hier is een functie zonder extra else logica:

  ```php
  public function getUserName(): ?string {
      // Controleer of de gebruiker is ingelogd
      if (AuthenticatedUser::isLoggedIn()) {
          return AuthenticatedUser::getName();
      }
      return null;
  }
  ```

  **Uitleg:**

  - **?string**: Geeft aan dat de functie een string of null kan retourneren.

  - Hier wordt alleen de gebruikersnaam geretourneerd als de gebruiker is ingelogd; anders returnt hij null.

usage:
  {"prompt_tokens":1306,"completion_tokens":119,"cache_write_input_tokens":0,"cache_read_input_tokens":0,"reasoning_tokens":0}


id: 019d773f-bf07-72f4-b9bc-5facbdf94a45
conversation_id: 019d7737-3fb2-7009-b80e-66dac560e3f6
user_id: D294954
agent: App\Ai\Agents\CustomAgent
role: assistant
attachments: []
tool_calls: []
tool_results: []
meta: {"provider":"openai","model":"gpt-4o","citations":[]}
created_at: 2026-04-10 13:55:59
updated_at: 2026-04-10 13:55:59
content:
  Geen probleem! Laten we ervoor zorgen dat het een correcte WPF-pagina (`Page`) is.

  ### VerslagOverzicht.xaml

  ```xml
  <Page x:Class="CareTracker.VerslagOverzicht"
        xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
        xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
        xmlns:local="clr-namespace:CareTracker"
        Title="Patiëntenoverzicht" Width="800" Height="600">
      <Grid>
          <Grid.RowDefinitions>
              <RowDefinition Height="Auto"/>
              <RowDefinition Height="*"/>
          </Grid.RowDefinitions>

          <!-- Header -->
          <StackPanel Orientation="Horizontal" Grid.Row="0" Background="#FF2D3E50" Padding="10">
              <Button Content="Home" Margin="10,0" Click="HomeButton_Click" Style="{StaticResource HeaderButtonStyle}"/>
              <Button Content="Afsprakenoverzicht" Margin="10,0" Click="AppointmentsOverviewButton_Click" Style="{StaticResource HeaderButtonStyle}"/>
              <Button Content="Afspraken maken" Margin="10,0" Click="MakeAppointmentsButton_Click" Style="{StaticResource HeaderButtonStyle}"/>
              <Button Content="Profiel" Margin="10,0" Click="ProfileButton_Click" Style="{StaticResource HeaderButtonStyle}"/>
              <Button Content="Uitloggen" Margin="10,0" Click="LogoutButton_Click" Style="{StaticResource HeaderButtonStyle}" HorizontalAlignment="Right"/>
          </StackPanel>

          <!-- Content -->
          <Grid Grid.Row="1" Margin="10">
              <Grid.ColumnDefinitions>
                  <ColumnDefinition Width="2*"/>
                  <ColumnDefinition Width="3*"/>
              </Grid.ColumnDefinitions>

              <!-- Zoekbalk en patiëntenlijst -->
              <StackPanel Grid.Column="0" Margin="10">
                  <TextBox x:Name="SearchBox" Width="200" Height="30" Margin="0,0,0,10"/>
                  <ListView x:Name="PatientList" SelectionChanged="PatientList_SelectionChanged"/>
              </StackPanel>

              <!-- Verslagen van de geselecteerde patiënt -->
              <StackPanel Grid.Column="1" Margin="10">
                  <TextBlock Text="Selecteer een patiënt voor details" FontWeight="Bold"/>
                  <ListView x:Name="ReportList" SelectionChanged="ReportList_SelectionChanged"/>
              </StackPanel>
          </Grid>
      </Grid>
  </Page>
  ```

  ### VerslagOverzicht.xaml.cs

  ```csharp
  using System.Linq;
  using System.Windows;
  using System.Windows.Controls;
  using CareTracker.Data;

  namespace CareTracker
  {
      public partial class VerslagOverzicht : Page
      {
          private readonly AppDbContext _context;

          public VerslagOverzicht()
          {
              InitializeComponent();
              _context = new AppDbContext();
              LoadPatients();
          }

          private void LoadPatients()
          {
              var patients = _context.Patients.Select(p => new
              {
                  Name = $"{p.FirstName} {p.LastName}",
                  p.Id
              }).ToList();

              PatientList.ItemsSource = patients;
              PatientList.DisplayMemberPath = "Name";
              PatientList.SelectedValuePath = "Id";
          }

          private void HomeButton_Click(object sender, RoutedEventArgs e) { /* Implementatie voor Home */ }
          private void AppointmentsOverviewButton_Click(object sender, RoutedEventArgs e) { /* Implementatie voor Afsprakenoverzicht */ }
          private void MakeAppointmentsButton_Click(object sender, RoutedEventArgs e) { /* Implementatie voor Afspraken maken */ }
          private void ProfileButton_Click(object sender, RoutedEventArgs e) { /* Implementatie voor Profiel */ }
          private void LogoutButton_Click(object sender, RoutedEventArgs e) { /* Implementatie voor Uitloggen */ }

          private void PatientList_SelectionChanged(object sender, SelectionChangedEventArgs e)
          {
              if (PatientList.SelectedItem != null)
              {
                  int selectedPatientId = (int)PatientList.SelectedValue;
                  LoadReportsForPatient(selectedPatientId);
              }
          }

          private void LoadReportsForPatient(int patientId)
          {
              var reports = _context.Reports
                  .Where(r => r.PatientId == patientId)
                  .Select(r => new
                  {
                      Title = $"{r.Date.ToShortDateString()} - {r.Appointment.Location}",
                      r.Id
                  }).ToList();

              ReportList.ItemsSource = reports;
              ReportList.DisplayMemberPath = "Title";
              ReportList.SelectedValuePath = "Id";
          }

          private void ReportList_SelectionChanged(object sender, SelectionChangedEventArgs e)
          {
              if (ReportList.SelectedItem != null)
              {
                  int selectedReportId = (int)ReportList.SelectedValue;
                  ShowReportDetails(selectedReportId);
              }
          }

          private void ShowReportDetails(int reportId)
          {
              var report = _context.Reports
                  .Where(r => r.Id == reportId)
                  .Select(r => r.Content)
                  .FirstOrDefault();

              MessageBox.Show(report, "Verslag Details", MessageBoxButton.OK, MessageBoxImage.Information);
          }
      }
  }
  ```

  Zorg ervoor dat:
  - Je de juiste namespace gebruikt in `x:Class`.
  - `HeaderButtonStyle` bestaat in je resources.
  - De juiste assemblies zijn toegevoegd aan je project, zoals `PresentationFramework`.

  Als je verdere vragen hebt, laat het me gerust weten!

usage:
  {"prompt_tokens":8531,"completion_tokens":1162,"cache_write_input_tokens":0,"cache_read_input_tokens":0,"reasoning_tokens":0}


id: 019d7740-5490-726c-8d1b-cc9935933405
conversation_id: 019d773a-d685-71b2-883e-d9254c665f0a
user_id: i303186
agent: App\Ai\Agents\CustomAgent
role: user
attachments: []
tool_calls: []
tool_results: []
usage: []
meta: []
created_at: 2026-04-10 13:56:37
updated_at: 2026-04-10 13:56:37
content:
  kan deze anders hij is nog te moeilijk?     PatientDetailsPanel.DataContext = PatientListView.SelectedItem as CareTracker.Data.Patient;


id: 019d7740-5498-7340-a5d0-9346af46d306
conversation_id: 019d773a-d685-71b2-883e-d9254c665f0a
user_id: i303186
agent: App\Ai\Agents\CustomAgent
role: assistant
attachments: []
tool_calls: []
tool_results: []
meta: {"provider":"openai","model":"gpt-4o","citations":[]}
created_at: 2026-04-10 13:56:37
updated_at: 2026-04-10 13:56:37
content:
  Natuurlijk! Je kunt het vereenvoudigen door een variabele te gebruiken en de code in kleinere stappen te splitsen voor duidelijkheid:

  ```csharp
  private void PatientListView_SelectionChanged(object sender, SelectionChangedEventArgs e)
  {
      // Haal het geselecteerde item op als een patiënt.
      var selectedPatient = PatientListView.SelectedItem as CareTracker.Data.Patient;

      // Als er een patiënt is geselecteerd, stel dan de gegevenscontext in.
      if (selectedPatient != null)
      {
          PatientDetailsPanel.DataContext = selectedPatient;
      }
  }
  ```

  Dit maakt het duidelijker wat er gebeurt door de stappen uit elkaar te trekken.

usage:
  {"prompt_tokens":3465,"completion_tokens":138,"cache_write_input_tokens":0,"cache_read_input_tokens":0,"reasoning_tokens":0}


id: 019d7740-ba98-72ff-8f2c-51a342e5857b
conversation_id: 019d7740-ba8d-7075-81e0-d58c86dce8ea
user_id: i287513
agent: App\Ai\Agents\CustomAgent
role: user
attachments: []
tool_calls: []
tool_results: []
usage: []
meta: []
created_at: 2026-04-10 13:57:04
updated_at: 2026-04-10 13:57:04
content:
  wat gaat er mis? leg alles in kindertaal uit: Foutmeldingen:    The type 'AssistantPage' already contains a definition for 'dayEvents'  Operator '==' cannot be applied to operands of type 'DateTime' and 'DateOnly'  Argument 1: cannot convert from 'System.DateOnly' to 'System.DateTime'             _planningDates = query
   Model:    public class Appointment
      {
          public int Id { get; set; }
          public DateTime DateTime { get; set; }
          public int PatientId { get; set; } // Foreign Key
          public Patient Patient { get; set; }
          public int DoctorId { get; set; } // Foreign Key
          public User Doctor { get; set; }
          public string Location { get; set; }
          public List<string> Classifications { get; set; } = new List<string>(); // Labels

          public Report Report { get; set; }  // 1-op-1-relatie met Report
      } XAML:<?xml version="1.0" encoding="utf-8"?>
  <Page
      x:Class="CareTracker.Pages.Patient.PatientPage"
      xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
      xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
      xmlns:local="using:CareTracker.Pages.Patient"
      xmlns:d="http://schemas.microsoft.com/expression/blend/2008"
      xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" xmlns:models="using:CareTracker.Data"
      mc:Ignorable="d">

      <Grid>
          <Grid.RowDefinitions>
              <RowDefinition Height="Auto"/>
              <!-- Header -->
              <RowDefinition Height="*"/>
              <!-- Content -->
          </Grid.RowDefinitions>

          <!-- Header -->
          <StackPanel Orientation="Horizontal"
                      Grid.Row="0"
                      Background="#FF2D3E50"
                      Padding="10">

              <Button Content="Home"
                      Margin="10,0"
                      Click="HomeButton_Click"
                      Style="{StaticResource HeaderButtonStyle}"/>

              <Button Content="Afsprakenoverzicht"
                      Margin="10,0"
                      Click="AppointmentsOverviewButton_Click"
                      Style="{StaticResource HeaderButtonStyle}"/>

              <Button Content="Afspraken maken"
                      Margin="10,0"
                      Click="MakeAppointmentsButton_Click"
                      Style="{StaticResource HeaderButtonStyle}"/>

              <Button Content="Profiel"
                      Margin="10,0"
                      Click="ProfileButton_Click"
                      Style="{StaticResource HeaderButtonStyle}"/>

              <Button Content="Uitloggen"
                      Margin="10,0"
                      Click="LogoutButton_Click"
                      Style="{StaticResource HeaderButtonStyle}"
                      HorizontalAlignment="Right"/>
          </StackPanel>

          <TextBox Grid.Row="1"
                   Margin="10"
                   PlaceholderText="Search patients..."
                   TextChanged="SearchBox_TextChanged"/>

          <!-- Patient list -->
          <ListView x:Name="PatientListView"
                    Grid.Row="2"
                    Margin="10">
              <ListView.ItemTemplate>
                  <DataTemplate x:DataType="models:Patient">
                      <StackPanel Orientation="Vertical">
                          <TextBlock Text="{x:Bind FirstName}" FontWeight="Bold"/>
                          <TextBlock Text="{x:Bind LastName}" Margin="0,0,0,10"/>
                      </StackPanel>
                  </DataTemplate>
              </ListView.ItemTemplate>
          </ListView>

      </Grid>
  </Page>
   C#: using CareTracker.Data;
  using Microsoft.EntityFrameworkCore;
  using Microsoft.UI;
  using Microsoft.UI.Xaml;
  using Microsoft.UI.Xaml.Controls;
  using Microsoft.UI.Xaml.Controls.Primitives;
  using Microsoft.UI.Xaml.Data;
  using Microsoft.UI.Xaml.Input;
  using Microsoft.UI.Xaml.Media;
  using Microsoft.UI.Xaml.Navigation;
  using System;
  using System.Collections.Generic;
  using System.IO;
  using System.Linq;
  using System.Runtime.InteropServices.WindowsRuntime;
  using System.Threading.Tasks;
  using Windows.Foundation;
  using Windows.Foundation.Collections;
  using CalendarView = Microsoft.UI.Xaml.Controls.CalendarView;
  using CalendarViewDayItem = Microsoft.UI.Xaml.Controls.CalendarViewDayItem;
  using ContentDialog = Microsoft.UI.Xaml.Controls.ContentDialog;
  using ListView = Microsoft.UI.Xaml.Controls.ListView;
  using Page = Microsoft.UI.Xaml.Controls.Page;
  using SolidColorBrush = Microsoft.UI.Xaml.Media.SolidColorBrush;



  // To learn more about WinUI, the WinUI project structure,
  // and more about our project templates, see: http://aka.ms/winui-project-info.

  namespace CareTracker.Pages.Assistant
  {
      /// <summary>
      /// An empty page that can be used on its own or navigated to within a Frame.
      /// </summary>
      public sealed partial class AssistantPage : Page
      {
          private HashSet<DateOnly> _planningDates = new();
          List<DateTime> dayEvents = new()
          {
              DateTime.Today,
          };
          public AssistantPage()
          {
              InitializeComponent();

              LoadPlanningDates();

          }
          private void LoadPlanningDates()
          {

              using (var db = new AppDbContext())
              {
                  if (calendarView.SelectedDates.Count == 0)
                  {
                      TodayPlanningListView.ItemsSource = db.Appointments
                          .Where(p => p.DateTime == DateOnly.FromDateTime(DateTime.Today))
                          .ToList();
                  }
              }
          }

          private void AddCalendarItemButton_Click(object sender, RoutedEventArgs e)
          {

          }

          // Gebruikte bron: https://stackoverflow.com/a/75269157

          List<DateTime> dayEvents = new()
              {
                  DateTime.Today,
              };


          private void CalendarView_CalendarViewDayItemChanging(
              CalendarView sender,
              CalendarViewDayItemChangingEventArgs args)
          {
              if (args.Item == null) return;

              var date = DateOnly.FromDateTime(args.Item.Date.DateTime);

              using var db = new AppDbContext();

              var planningDates = db.Appointments
              .Select(p => p.DateTime)
              .ToHashSet();
              var dateOnly = DateOnly.FromDateTime(
                  args.Item.Date.DateTime
              );

              if (planningDates.Contains(dateOnly))
              {
                  args.Item.Background = new SolidColorBrush(Colors.Yellow);
                  args.Item.Foreground = new SolidColorBrush(Colors.Black);
                  //args.Item.BorderBrush = new SolidColorBrush(Colors.Yellow);
                  //args.Item.BorderThickness = new Thickness(2);
              }
              else
              {
                  args.Item.ClearValue(CalendarViewDayItem.ForegroundProperty);
              }
          }



          // I made this to look what is todo in a day
          private async void CalendarView_SelectedDatesChanged(
              CalendarView sender,
              CalendarViewSelectedDatesChangedEventArgs args)
          {
              if (args.AddedDates.Count == 0)
                  return;

              var date = DateOnly.FromDateTime(args.AddedDates[0].DateTime);
              await ShowPlanningDialog(date);
          }

          // I made a dialog of the days, because I want that the customers see how many plans in a day is, and which plans there are.
          private async Task ShowPlanningDialog(DateOnly date)
          {
              using var db = new AppDbContext();

              var plannings = db.Appointments
                  .Where(p => p.DateTime == date)
                  .ToList();

              var listView = new ListView
              {
                  ItemsSource = plannings,
                  DisplayMemberPath = "Plan",
                  IsItemClickEnabled = true
              };

              listView.ItemClick += (s, e) =>
              {
                  var item = (Data.Appointment)e.ClickedItem;
                  // navigeren
              };

              var dialog = new ContentDialog
              {
                  Title = $"Plannen op {date}",
                  Content = listView,
                  CloseButtonText = "Sluiten",
                  XamlRoot = this.XamlRoot
              };

              await dialog.ShowAsync();
          }

          // I made this to show which days have a planning
          private void CalendarView_DayItemChanging(
              CalendarView sender,
              CalendarViewDayItemChangingEventArgs args)
          {
              var dateOnly = DateOnly.FromDateTime(
                  args.Item.Date.DateTime
              );

              if (_planningDates.Contains(dateOnly))
              {
                  args.Item.Tag = "HasPlanning";
              }
              else
              {
                  args.Item.Tag = null;
              }
          }




          private void Filter_Changed(object sender, object e)
          {
              using var db = new AppDbContext();

              var query = db.Appointments.AsQueryable();


              var today = DateOnly.FromDateTime(DateTime.Today);
              TodayPlanningListView.ItemsSource =
                  query.Where(p => p.DateTime == today).ToList();

              _planningDates = query
                  .Select(p => p.DateTime)
                  .Distinct()
                  .ToHashSet();


              calendarView.SelectedDates.Clear();
          }

      }
  }


id: 019d7740-baa6-70d0-8bac-6b78d78494c0
conversation_id: 019d7740-ba8d-7075-81e0-d58c86dce8ea
user_id: i287513
agent: App\Ai\Agents\CustomAgent
role: assistant
attachments: []
tool_calls: []
tool_results: []
meta: {"provider":"openai","model":"gpt-5","citations":[]}
created_at: 2026-04-10 13:57:04
updated_at: 2026-04-10 13:57:04
content:
  Kort en simpel uitgelegd (kindertaal):

  Wat gaat er mis?
  - Je hebt twee keer hetzelfde doosje met dezelfde naam gemaakt: dayEvents. Dat mag niet. Je mag maar één doosje met die naam hebben.
  - Je probeert twee verschillende soorten datums met elkaar te vergelijken: DateTime (datum + tijd) en DateOnly (alleen datum). Dat zijn appels en peren. Die kun je niet met == vergelijken.
  - Je stopt dingen van soort DateTime in een emmertje dat bedoeld is voor DateOnly (of andersom) bij _planningDates. Dat past niet.

  Makkelijkste oplossing: gebruik overal DateTime en vergelijk alleen het datum-deel (dus zonder tijd).
  Zo hoef je niet te stoeien met DateOnly.

  Stap-voor-stap wat je aanpast:

  1) Dubbele dayEvents verwijderen
  - Laat er maar één staan:
    List<DateTime> dayEvents = new() { DateTime.Today };

  - Verwijder de tweede “List<DateTime> dayEvents = …” verderop in de klasse.

  2) _planningDates hetzelfde type maken als wat je erin stopt
  - Maak van _planningDates een set met DateTime (alleen de datum-deel erin stoppen):
    private HashSet<DateTime> _planningDates = new();

  3) Vandaag-lijst laden zonder DateOnly
  - In LoadPlanningDates vervang:
    Where(p => p.DateTime == DateOnly.FromDateTime(DateTime.Today))
    door:
    Where(p => p.DateTime.Date == DateTime.Today)

  4) Kalender-dag highlighten (de dagen met afspraken geel maken)
  - Vergelijk ook hier “datum zonder tijd”:
    var cellDate = args.Item.Date.DateTime.Date;
    // optie A: direct uit DB (simpel, maar kan vaker de DB raken)
    bool hasPlanning = db.Appointments.Any(p => p.DateTime.Date == cellDate);
    if (hasPlanning) { geel maken } else { resetten }

  - Of optie B: gebruik de vooraf gevulde _planningDates:
    if (_planningDates.Contains(cellDate)) { geel maken } else { resetten }

  5) Als je op een dag klikt: juiste type doorgeven
  - In CalendarView_SelectedDatesChanged:
    var date = args.AddedDates[0].DateTime.Date;  // dit is een DateTime met tijd 00:00
    await ShowPlanningDialog(date);

  - Pas ShowPlanningDialog aan naar DateTime in plaats van DateOnly:
    private async Task ShowPlanningDialog(DateTime date)

  - In ShowPlanningDialog filter je op een dag met een bereik:
    var start = date;                // 00:00
    var end = date.AddDays(1);       // tot maar niet met de volgende dag
    var plannings = db.Appointments
        .Where(p => p.DateTime >= start && p.DateTime < end)
        .ToList();

  6) Filter_Changed fixen
  - today moet een DateTime zijn, geen DateOnly:
    var today = DateTime.Today;
    TodayPlanningListView.ItemsSource =
        query.Where(p => p.DateTime.Date == today).ToList();

  - _planningDates vullen met alleen de datum-deel:
    _planningDates = query
        .Select(p => p.DateTime.Date)
        .Distinct()
        .ToHashSet();

  7) Klein extra puntje
  - In je dialog ListView gebruik je DisplayMemberPath = "Plan", maar Appointment heeft geen eigenschap “Plan”. Kies iets dat echt bestaat, bijvoorbeeld "Location" of maak een weergavetekst.

  Waarom dit werkt
  - Je gebruikt overal hetzelfde soort datum (DateTime).
  - Je vergelijkt alleen de datum-deel (met .Date) zodat de tijd niet stoort.
  - Je hebt geen dubbele variabelenamen meer.

  Als je toch per se DateOnly wilt gebruiken
  - Dan moet je overal je DateTime naar DateOnly omzetten vóór je vergelijkt:
    DateOnly.FromDateTime(p.DateTime)
  - En ook je verzamelingen/variabelen van type DateOnly maken.
  - Maar dat geeft sneller vertaalproblemen in je database-queries. Daarom is “alles DateTime en dan .Date vergelijken” de makkelijkste en veiligste route.

usage:
  {"prompt_tokens":1911,"completion_tokens":4396,"cache_write_input_tokens":0,"cache_read_input_tokens":0,"reasoning_tokens":3456}


id: 019d7740-c85f-7075-9a87-ac3f835cc25b
conversation_id: 019d773a-d685-71b2-883e-d9254c665f0a
user_id: i303186
agent: App\Ai\Agents\CustomAgent
role: assistant
attachments: []
tool_calls: []
tool_results: []
meta: {"provider":"openai","model":"gpt-4o","citations":[]}
created_at: 2026-04-10 13:57:07
updated_at: 2026-04-10 13:57:07
content:
  Laten we het nog eenvoudiger maken door het proces uit te leggen:

  ```csharp
  private void PatientListView_SelectionChanged(object sender, SelectionChangedEventArgs e)
  {
      // Lees de geselecteerde patiënt.
      var geselecteerdePatiënt = PatientListView.SelectedItem as CareTracker.Data.Patient;

      // Toon de gegevens van de patiënt als er een is geselecteerd.
      if (geselecteerdePatiënt != null)
      {
          PatientDetailsPanel.DataContext = geselecteerdePatiënt;
      }
  }
  ```

  Hierdoor wordt de logica opgesplitst in eenvoudige stappen en zijn de variabelen in duidelijk Nederlands benoemd.

usage:
  {"prompt_tokens":3616,"completion_tokens":136,"cache_write_input_tokens":0,"cache_read_input_tokens":0,"reasoning_tokens":0}


id: 019d7740-ccdf-714d-a85e-e8587a06c74a
conversation_id: 019d7737-3fb2-7009-b80e-66dac560e3f6
user_id: D294954
agent: App\Ai\Agents\CustomAgent
role: user
attachments: []
tool_calls: []
tool_results: []
usage: []
meta: []
created_at: 2026-04-10 13:57:08
updated_at: 2026-04-10 13:57:08
content:
  Severity	Code	Description	Project	File	Line	Suppression State
  Error (active)	CS0103	The name 'InitializeComponent' does not exist in the current context	CareTracker	C:\Users\EXTTICT040\source\repos\pvb-2025-2026-mathis-mike-mart-dylano\CareTracker\Pages\Verlag\VerslagOverzicht.xaml.cs	16	
  Error	XLS0413	The property 'Title' was not found in type 'Page'.	CareTracker	C:\Users\EXTTICT040\Source\Repos\pvb-2025-2026-mathis-mike-mart-dylano\CareTracker\Pages\Verlag\VerslagOverzicht.xaml	5	
  Error (active)	CS0234	The type or namespace name 'Controls' does not exist in the namespace 'System.Windows' (are you missing an assembly reference?)	CareTracker	C:\Users\EXTTICT040\source\repos\pvb-2025-2026-mathis-mike-mart-dylano\CareTracker\Pages\Verlag\VerslagOverzicht.xaml.cs	6	
  Error (active)	CS0103	The name 'PatientList' does not exist in the current context	CareTracker	C:\Users\EXTTICT040\source\repos\pvb-2025-2026-mathis-mike-mart-dylano\CareTracker\Pages\Verlag\VerslagOverzicht.xaml.cs	29	
  Error (active)	CS0103	The name 'PatientList' does not exist in the current context	CareTracker	C:\Users\EXTTICT040\source\repos\pvb-2025-2026-mathis-mike-mart-dylano\CareTracker\Pages\Verlag\VerslagOverzicht.xaml.cs	30	
  Error (active)	CS0103	The name 'PatientList' does not exist in the current context	CareTracker	C:\Users\EXTTICT040\source\repos\pvb-2025-2026-mathis-mike-mart-dylano\CareTracker\Pages\Verlag\VerslagOverzicht.xaml.cs	31	
  Error (active)	CS0103	The name 'PatientList' does not exist in the current context	CareTracker	C:\Users\EXTTICT040\source\repos\pvb-2025-2026-mathis-mike-mart-dylano\CareTracker\Pages\Verlag\VerslagOverzicht.xaml.cs	42	
  Error (active)	CS0103	The name 'PatientList' does not exist in the current context	CareTracker	C:\Users\EXTTICT040\source\repos\pvb-2025-2026-mathis-mike-mart-dylano\CareTracker\Pages\Verlag\VerslagOverzicht.xaml.cs	44	
  Error (active)	CS0103	The name 'ReportList' does not exist in the current context	CareTracker	C:\Users\EXTTICT040\source\repos\pvb-2025-2026-mathis-mike-mart-dylano\CareTracker\Pages\Verlag\VerslagOverzicht.xaml.cs	59	
  Error (active)	CS0103	The name 'ReportList' does not exist in the current context	CareTracker	C:\Users\EXTTICT040\source\repos\pvb-2025-2026-mathis-mike-mart-dylano\CareTracker\Pages\Verlag\VerslagOverzicht.xaml.cs	60	
  Error (active)	CS0103	The name 'ReportList' does not exist in the current context	CareTracker	C:\Users\EXTTICT040\source\repos\pvb-2025-2026-mathis-mike-mart-dylano\CareTracker\Pages\Verlag\VerslagOverzicht.xaml.cs	61	
  Error (active)	CS0103	The name 'ReportList' does not exist in the current context	CareTracker	C:\Users\EXTTICT040\source\repos\pvb-2025-2026-mathis-mike-mart-dylano\CareTracker\Pages\Verlag\VerslagOverzicht.xaml.cs	66	
  Error (active)	CS0103	The name 'ReportList' does not exist in the current context	CareTracker	C:\Users\EXTTICT040\source\repos\pvb-2025-2026-mathis-mike-mart-dylano\CareTracker\Pages\Verlag\VerslagOverzicht.xaml.cs	68	
  Error (active)	CS0103	The name 'MessageBox' does not exist in the current context	CareTracker	C:\Users\EXTTICT040\source\repos\pvb-2025-2026-mathis-mike-mart-dylano\CareTracker\Pages\Verlag\VerslagOverzicht.xaml.cs	80	
  Error (active)	CS0103	The name 'MessageBoxButton' does not exist in the current context	CareTracker	C:\Users\EXTTICT040\source\repos\pvb-2025-2026-mathis-mike-mart-dylano\CareTracker\Pages\Verlag\VerslagOverzicht.xaml.cs	80	
  Error (active)	CS0103	The name 'MessageBoxImage' does not exist in the current context	CareTracker	C:\Users\EXTTICT040\source\repos\pvb-2025-2026-mathis-mike-mart-dylano\CareTracker\Pages\Verlag\VerslagOverzicht.xaml.cs	80


id: 019d7740-ccf1-738d-b33c-f0ea007136c9
conversation_id: 019d7737-3fb2-7009-b80e-66dac560e3f6
user_id: D294954
agent: App\Ai\Agents\CustomAgent
role: assistant
attachments: []
tool_calls: []
tool_results: []
meta: {"provider":"openai","model":"gpt-4o","citations":[]}
created_at: 2026-04-10 13:57:08
updated_at: 2026-04-10 13:57:08
content:
  Laten we de problemen stap voor stap oplossen:

  ### Fouten en Oplossingen

  1. **InitializeComponent**: 
     - Zorg ervoor dat de `x:Class` in XAML exact overeenkomt met de namespace en de klassennaam in je `.cs`-bestand.
     - Vertrouw erop dat de bestandspaden en projectstructuur correct zijn ingesteld.

  2. **Title Eigenschap:**
     - `Page` heeft niet standaard een `Title`-attribuut. Je kunt dit verwijderen of gebruiken binnen een `Window` als je de pagina in een `Frame` insluit.

  3. **System.Windows.Controls:**
     - Zorg ervoor dat alle nodige WPF libraries correct zijn geïnstalleerd en geïmporteerd. Als je Visual Studio gebruikt, controleer of `PresentationFramework`, `PresentationCore`, `WindowsBase`, en `System.Xaml` als referenties zijn toegevoegd.

  4. **Naam van Elementen:**
     - Zorg ervoor dat de `x:Name`-attributen in XAML precies overeenkomen en dat je geen typfouten hebt.

  5. **MessageBox en gerelateerde onderdelen:**
     - Voeg toe aan je C# code: `using System.Windows;`.

  ### Verbeterde Codevoorbeelden

  #### VerslagOverzicht.xaml

  ```xml
  <Page x:Class="CareTracker.Pages.Verslag.VerslagOverzicht"
        xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
        xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
        xmlns:local="clr-namespace:CareTracker.Pages.Verslag"
        Width="800" Height="600">
      <Grid>
          <Grid.RowDefinitions>
              <RowDefinition Height="Auto"/>
              <RowDefinition Height="*"/>
          </Grid.RowDefinitions>

          <!-- Header -->
          <StackPanel Orientation="Horizontal" Grid.Row="0" Background="#FF2D3E50" Padding="10">
              <Button Content="Home" Margin="10,0" Click="HomeButton_Click"/>
              <Button Content="Afsprakenoverzicht" Margin="10,0" Click="AppointmentsOverviewButton_Click"/>
              <Button Content="Afspraken maken" Margin="10,0" Click="MakeAppointmentsButton_Click"/>
              <Button Content="Profiel" Margin="10,0" Click="ProfileButton_Click"/>
              <Button Content="Uitloggen" Margin="10,0" Click="LogoutButton_Click" HorizontalAlignment="Right"/>
          </StackPanel>

          <!-- Content -->
          <Grid Grid.Row="1" Margin="10">
              <Grid.ColumnDefinitions>
                  <ColumnDefinition Width="2*"/>
                  <ColumnDefinition Width="3*"/>
              </Grid.ColumnDefinitions>

              <!-- Zoekbalk en patiëntenlijst -->
              <StackPanel Grid.Column="0" Margin="10">
                  <TextBox x:Name="SearchBox" Width="200" Height="30" Margin="0,0,0,10"/>
                  <ListView x:Name="PatientList" SelectionChanged="PatientList_SelectionChanged"/>
              </StackPanel>

              <!-- Verslagen van de geselecteerde patiënt -->
              <StackPanel Grid.Column="1" Margin="10">
                  <TextBlock Text="Selecteer een patiënt voor details" FontWeight="Bold"/>
                  <ListView x:Name="ReportList" SelectionChanged="ReportList_SelectionChanged"/>
              </StackPanel>
          </Grid>
      </Grid>
  </Page>
  ```

  #### VerslagOverzicht.xaml.cs

  ```csharp
  using System.Linq;
  using System.Windows;
  using System.Windows.Controls;
  using CareTracker.Data;

  namespace CareTracker.Pages.Verslag
  {
      public partial class VerslagOverzicht : Page
      {
          private readonly AppDbContext _context;

          public VerslagOverzicht()
          {
              InitializeComponent();
              _context = new AppDbContext();
              LoadPatients();
          }

          private void LoadPatients()
          {
              var patients = _context.Patients.Select(p => new
              {
                  Name = $"{p.FirstName} {p.LastName}",
                  p.Id
              }).ToList();

              PatientList.ItemsSource = patients;
              PatientList.DisplayMemberPath = "Name";
              PatientList.SelectedValuePath = "Id";
          }

          private void HomeButton_Click(object sender, RoutedEventArgs e) { /* Implementatie voor Home */ }
          private void AppointmentsOverviewButton_Click(object sender, RoutedEventArgs e) { /* Implementatie voor Afsprakenoverzicht */ }
          private void MakeAppointmentsButton_Click(object sender, RoutedEventArgs e) { /* Implementatie voor Afspraken maken */ }
          private void ProfileButton_Click(object sender, RoutedEventArgs e) { /* Implementatie voor Profiel */ }
          private void LogoutButton_Click(object sender, RoutedEventArgs e) { /* Implementatie voor Uitloggen */ }

          private void PatientList_SelectionChanged(object sender, SelectionChangedEventArgs e)
          {
              if (PatientList.SelectedItem != null)
              {
                  int selectedPatientId = (int)PatientList.SelectedValue;
                  LoadReportsForPatient(selectedPatientId);
              }
          }

          private void LoadReportsForPatient(int patientId)
          {
              var reports = _context.Reports
                  .Where(r => r.PatientId == patientId)
                  .Select(r => new
                  {
                      Title = $"{r.Date.ToShortDateString()} - {r.Appointment.Location}",
                      r.Id
                  }).ToList();

              ReportList.ItemsSource = reports;
              ReportList.DisplayMemberPath = "Title";
              ReportList.SelectedValuePath = "Id";
          }

          private void ReportList_SelectionChanged(object sender, SelectionChangedEventArgs e)
          {
              if (ReportList.SelectedItem != null)
              {
                  int selectedReportId = (int)ReportList.SelectedValue;
                  ShowReportDetails(selectedReportId);
              }
          }

          private void ShowReportDetails(int reportId)
          {
              var report = _context.Reports
                  .Where(r => r.Id == reportId)
                  .Select(r => r.Content)
                  .FirstOrDefault();

              MessageBox.Show(report, "Verslag Details", MessageBoxButton.OK, MessageBoxImage.Information);
          }
      }
  }
  ```

  Controleer of de paden en namen in je project overeenkomen. Als er nog steeds problemen zijn, kan het nuttig zijn om de oplossing opnieuw te bouwen of Visual Studio te herstarten. Laat het me weten als je meer hulp nodig hebt!

usage:
  {"prompt_tokens":10891,"completion_tokens":1357,"cache_write_input_tokens":0,"cache_read_input_tokens":0,"reasoning_tokens":0}


id: 019d7741-1002-719d-9f49-b7b787ad935f
conversation_id: 019d773a-d685-71b2-883e-d9254c665f0a
user_id: i303186
agent: App\Ai\Agents\CustomAgent
role: user
attachments: []
tool_calls: []
tool_results: []
usage: []
meta: []
created_at: 2026-04-10 13:57:25
updated_at: 2026-04-10 13:57:25
content:
  geef anders betere uitle: // Controleer of er een patiënt is geselecteerd en stel de details in.
  PatientDetailsPanel.DataContext = PatientListView.SelectedItem as CareTracker.Data.Patient;


id: 019d7741-1011-71b3-a539-436afed6168f
conversation_id: 019d773a-d685-71b2-883e-d9254c665f0a
user_id: i303186
agent: App\Ai\Agents\CustomAgent
role: assistant
attachments: []
tool_calls: []
tool_results: []
meta: {"provider":"openai","model":"gpt-4o","citations":[]}
created_at: 2026-04-10 13:57:25
updated_at: 2026-04-10 13:57:25
content:
  Natuurlijk, hier is een eenvoudigere uitleg:

  ```csharp
  // Als een patiënt is geselecteerd, toon dan de details in het detailpaneel.
  PatientDetailsPanel.DataContext = PatientListView.SelectedItem as CareTracker.Data.Patient;
  ```

usage:
  {"prompt_tokens":598,"completion_tokens":51,"cache_write_input_tokens":0,"cache_read_input_tokens":3200,"reasoning_tokens":0}


id: 019d7741-95ea-72c7-990f-917ab9a6a674
conversation_id: 019d773a-d685-71b2-883e-d9254c665f0a
user_id: i303186
agent: App\Ai\Agents\CustomAgent
role: assistant
attachments: []
tool_calls: []
tool_results: []
meta: {"provider":"openai","model":"gpt-4o","citations":[]}
created_at: 2026-04-10 13:58:00
updated_at: 2026-04-10 13:58:00
content:
  Deze regel code doet het volgende:

  - **User Uitloggen**: Het stelt de `CurrentUser` binnen de `LoggedInUser`-klasse in op `null`. Dit betekent meestal dat de huidige gebruiker wordt uitgelogd of dat de gebruiker sessie wordt beëindigd.

  - **Opnieuw Inloggen Vereisen**: Door de huidige gebruiker op `null` te zetten, moet de gebruiker waarschijnlijk opnieuw inloggen om toegang te krijgen tot beveiligde delen van de applicatie.

  Kortom, dit is een manier om aan te geven dat er geen gebruiker meer is ingelogd.

usage:
  {"prompt_tokens":1949,"completion_tokens":121,"cache_write_input_tokens":0,"cache_read_input_tokens":1920,"reasoning_tokens":0}


id: 019d7742-9b3f-703a-a49e-840cba0637e2
conversation_id: 019d7737-3fb2-7009-b80e-66dac560e3f6
user_id: D294954
agent: App\Ai\Agents\CustomAgent
role: user
attachments: []
tool_calls: []
tool_results: []
usage: []
meta: []
created_at: 2026-04-10 13:59:07
updated_at: 2026-04-10 13:59:07
content:
  oke top alleen de verslagen die in een statise box aan de rechter kant klopt niet kan je dit verandere zodat daar altijd een sectie is waar we een list kunnen zetten met alle verslagen


id: 019d7742-9b47-723c-96ed-4ece6c53b188
conversation_id: 019d7737-3fb2-7009-b80e-66dac560e3f6
user_id: D294954
agent: App\Ai\Agents\CustomAgent
role: assistant
attachments: []
tool_calls: []
tool_results: []
meta: {"provider":"openai","model":"gpt-4o","citations":[]}
created_at: 2026-04-10 13:59:07
updated_at: 2026-04-10 13:59:07
content:
  Natuurlijk, laten we de rechter sectie aanpassen zodat er altijd een lijst is waar we alle verslagen kunnen tonen. Hier is hoe je dat kunt doen:

  ### VerslagOverzicht.xaml

  ```xml
  <Page x:Class="CareTracker.Pages.Verslag.VerslagOverzicht"
        xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
        xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
        xmlns:local="clr-namespace:CareTracker.Pages.Verslag"
        Width="800" Height="600">
      <Grid>
          <Grid.RowDefinitions>
              <RowDefinition Height="Auto"/>
              <RowDefinition Height="*"/>
          </Grid.RowDefinitions>

          <!-- Header -->
          <StackPanel Orientation="Horizontal" Grid.Row="0" Background="#FF2D3E50" Padding="10">
              <Button Content="Home" Margin="10,0" Click="HomeButton_Click"/>
              <Button Content="Afsprakenoverzicht" Margin="10,0" Click="AppointmentsOverviewButton_Click"/>
              <Button Content="Afspraken maken" Margin="10,0" Click="MakeAppointmentsButton_Click"/>
              <Button Content="Profiel" Margin="10,0" Click="ProfileButton_Click"/>
              <Button Content="Uitloggen" Margin="10,0" Click="LogoutButton_Click" HorizontalAlignment="Right"/>
          </StackPanel>

          <!-- Content -->
          <Grid Grid.Row="1" Margin="10">
              <Grid.ColumnDefinitions>
                  <ColumnDefinition Width="2*"/>
                  <ColumnDefinition Width="3*"/>
              </Grid.ColumnDefinitions>

              <!-- Zoekbalk en patiëntenlijst -->
              <StackPanel Grid.Column="0" Margin="10">
                  <TextBox x:Name="SearchBox" Width="200" Height="30" Margin="0,0,0,10"/>
                  <ListView x:Name="PatientList" SelectionChanged="PatientList_SelectionChanged"/>
              </StackPanel>

              <!-- Verslagen van de geselecteerde patiënt -->
              <StackPanel Grid.Column="1" Margin="10">
                  <TextBlock Text="Selecteer een patiënt om verslagen te bekijken" FontWeight="Bold" Margin="0,0,0,10"/>
                  <ListView x:Name="ReportList" SelectionChanged="ReportList_SelectionChanged"/>
              </StackPanel>
          </Grid>
      </Grid>
  </Page>
  ```

  ### Aanpassingen in de Code-behind

  Je code-behind moet functioneel blijven zoals eerder, maar ik zal hem opnemen voor de volledigheid:

  #### VerslagOverzicht.xaml.cs

  ```csharp
  using System.Linq;
  using System.Windows;
  using System.Windows.Controls;
  using CareTracker.Data;

  namespace CareTracker.Pages.Verslag
  {
      public partial class VerslagOverzicht : Page
      {
          private readonly AppDbContext _context;

          public VerslagOverzicht()
          {
              InitializeComponent();
              _context = new AppDbContext();
              LoadPatients();
          }

          private void LoadPatients()
          {
              var patients = _context.Patients.Select(p => new
              {
                  Name = $"{p.FirstName} {p.LastName}",
                  p.Id
              }).ToList();

              PatientList.ItemsSource = patients;
              PatientList.DisplayMemberPath = "Name";
              PatientList.SelectedValuePath = "Id";
          }

          private void HomeButton_Click(object sender, RoutedEventArgs e) { /* Implementatie voor Home */ }
          private void AppointmentsOverviewButton_Click(object sender, RoutedEventArgs e) { /* Implementatie voor Afsprakenoverzicht */ }
          private void MakeAppointmentsButton_Click(object sender, RoutedEventArgs e) { /* Implementatie voor Afspraken maken */ }
          private void ProfileButton_Click(object sender, RoutedEventArgs e) { /* Implementatie voor Profiel */ }
          private void LogoutButton_Click(object sender, RoutedEventArgs e) { /* Implementatie voor Uitloggen */ }

          private void PatientList_SelectionChanged(object sender, SelectionChangedEventArgs e)
          {
              if (PatientList.SelectedItem != null)
              {
                  int selectedPatientId = (int)PatientList.SelectedValue;
                  LoadReportsForPatient(selectedPatientId);
              }
          }

          private void LoadReportsForPatient(int patientId)
          {
              var reports = _context.Reports
                  .Where(r => r.PatientId == patientId)
                  .Select(r => new
                  {
                      Title = $"{r.Date.ToShortDateString()} - {r.Appointment.Location}",
                      r.Id
                  }).ToList();

              ReportList.ItemsSource = reports;
              ReportList.DisplayMemberPath = "Title";
              ReportList.SelectedValuePath = "Id";
          }

          private void ReportList_SelectionChanged(object sender, SelectionChangedEventArgs e)
          {
              if (ReportList.SelectedItem != null)
              {
                  int selectedReportId = (int)ReportList.SelectedValue;
                  ShowReportDetails(selectedReportId);
              }
          }

          private void ShowReportDetails(int reportId)
          {
              var report = _context.Reports
                  .Where(r => r.Id == reportId)
                  .Select(r => r.Content)
                  .FirstOrDefault();

              MessageBox.Show(report, "Verslag Details", MessageBoxButton.OK, MessageBoxImage.Information);
          }
      }
  }
  ```

  ### Opmerkingen:
  - Dit zorgt ervoor dat er altijd een lijst aanwezig is voor verslagen, met een duidelijke tekst die aangeeft dat een patiënt geselecteerd moet worden.
  - De lijst aan de rechterkant blijft zichtbaar, zelfs als er geen patiënt is geselecteerd.
  - Zorg dat alles goed uitgelijnd en in de juiste namespace zit.

  Als je nog meer aanpassingen nodig hebt, laat het me weten!

usage:
  {"prompt_tokens":2823,"completion_tokens":1206,"cache_write_input_tokens":0,"cache_read_input_tokens":9472,"reasoning_tokens":0}


id: 019d7742-ab9f-7358-9326-a772de0446fd
conversation_id: 019d773e-c4a6-703d-84a8-7b55652346b2
user_id: i302573
agent: App\Ai\Agents\CustomAgent
role: assistant
content:
  public function getUserName(): string
  {
  return (string) auth()->user()?->name;
  }

attachments: []
tool_calls: []
tool_results: []
meta: {"provider":"openai","model":"gpt-5","citations":[]}
created_at: 2026-04-10 13:59:11
updated_at: 2026-04-10 13:59:11
usage:
  {"prompt_tokens":1464,"completion_tokens":1314,"cache_write_input_tokens":0,"cache_read_input_tokens":0,"reasoning_tokens":1280}


id: 019d7743-601d-7034-9376-07ea194ea721
conversation_id: 019d7740-ba8d-7075-81e0-d58c86dce8ea
user_id: i287513
agent: App\Ai\Agents\CustomAgent
role: assistant
attachments: []
tool_calls: []
tool_results: []
meta: {"provider":"openai","model":"gpt-5","citations":[]}
created_at: 2026-04-10 13:59:57
updated_at: 2026-04-10 13:59:57
content:
  Hier zijn kant-en-klare codeblokken met de fixes (geen DateOnly meer, dubbele dayEvents verwijderd, correcte datumvergelijkingen, juiste DisplayMemberPath).

  AssistantPage.xaml.cs (volledige, aangepaste versie)
  using CareTracker.Data;
  using Microsoft.EntityFrameworkCore;
  using Microsoft.UI;
  using Microsoft.UI.Xaml;
  using Microsoft.UI.Xaml.Controls;
  using Microsoft.UI.Xaml.Controls.Primitives;
  using Microsoft.UI.Xaml.Data;
  using Microsoft.UI.Xaml.Input;
  using Microsoft.UI.Xaml.Media;
  using Microsoft.UI.Xaml.Navigation;
  using System;
  using System.Collections.Generic;
  using System.IO;
  using System.Linq;
  using System.Runtime.InteropServices.WindowsRuntime;
  using System.Threading.Tasks;
  using Windows.Foundation;
  using Windows.Foundation.Collections;
  using CalendarView = Microsoft.UI.Xaml.Controls.CalendarView;
  using CalendarViewDayItem = Microsoft.UI.Xaml.Controls.CalendarViewDayItem;
  using ContentDialog = Microsoft.UI.Xaml.Controls.ContentDialog;
  using ListView = Microsoft.UI.Xaml.Controls.ListView;
  using Page = Microsoft.UI.Xaml.Controls.Page;
  using SolidColorBrush = Microsoft.UI.Xaml.Media.SolidColorBrush;

  namespace CareTracker.Pages.Assistant
  {
      public sealed partial class AssistantPage : Page
      {
          private HashSet<DateTime> _planningDates = new();
          private readonly List<DateTime> dayEvents = new() { DateTime.Today };

          public AssistantPage()
          {
              InitializeComponent();
              RefreshPlanningCache();
              LoadTodayPlanning();
          }

          private void RefreshPlanningCache()
          {
              using var db = new AppDbContext();
              _planningDates = db.Appointments
                  .Select(p => p.DateTime.Date)
                  .Distinct()
                  .ToHashSet();
          }

          private void LoadTodayPlanning()
          {
              using var db = new AppDbContext();

              var today = DateTime.Today;
              TodayPlanningListView.ItemsSource = db.Appointments
                  .Where(p => p.DateTime >= today && p.DateTime < today.AddDays(1))
                  .ToList();
          }

          private void AddCalendarItemButton_Click(object sender, RoutedEventArgs e)
          {
          }

          private void CalendarView_CalendarViewDayItemChanging(
              CalendarView sender,
              CalendarViewDayItemChangingEventArgs args)
          {
              if (args.Item == null) return;

              var cellDate = args.Item.Date.DateTime.Date;

              if (_planningDates.Contains(cellDate))
              {
                  args.Item.Background = new SolidColorBrush(Colors.Yellow);
                  args.Item.Foreground = new SolidColorBrush(Colors.Black);
              }
              else
              {
                  args.Item.ClearValue(CalendarViewDayItem.BackgroundProperty);
                  args.Item.ClearValue(CalendarViewDayItem.ForegroundProperty);
              }
          }

          private async void CalendarView_SelectedDatesChanged(
              CalendarView sender,
              CalendarViewSelectedDatesChangedEventArgs args)
          {
              if (args.AddedDates.Count == 0) return;

              var date = args.AddedDates[0].DateTime.Date;
              await ShowPlanningDialog(date);
          }

          private async Task ShowPlanningDialog(DateTime date)
          {
              using var db = new AppDbContext();

              var start = date;
              var end = date.AddDays(1);

              var plannings = db.Appointments
                  .Where(p => p.DateTime >= start && p.DateTime < end)
                  .ToList();

              var listView = new ListView
              {
                  ItemsSource = plannings,
                  DisplayMemberPath = "Location", // Appointment heeft geen "Plan"; gebruik een bestaande eigenschap
                  IsItemClickEnabled = true
              };

              listView.ItemClick += (s, e) =>
              {
                  var item = (Appointment)e.ClickedItem;
                  // navigeren naar detail van item
              };

              var dialog = new ContentDialog
              {
                  Title = $"Plannen op {date:yyyy-MM-dd}",
                  Content = listView,
                  CloseButtonText = "Sluiten",
                  XamlRoot = this.XamlRoot
              };

              await dialog.ShowAsync();
          }

          private void CalendarView_DayItemChanging(
              CalendarView sender,
              CalendarViewDayItemChangingEventArgs args)
          {
              if (args.Item == null) return;

              var cellDate = args.Item.Date.DateTime.Date;

              if (_planningDates.Contains(cellDate))
              {
                  args.Item.Tag = "HasPlanning";
              }
              else
              {
                  args.Item.Tag = null;
              }
          }

          private void Filter_Changed(object sender, object e)
          {
              using var db = new AppDbContext();

              var query = db.Appointments.AsQueryable();

              var today = DateTime.Today;

              TodayPlanningListView.ItemsSource = query
                  .Where(p => p.DateTime >= today && p.DateTime < today.AddDays(1))
                  .ToList();

              _planningDates = query
                  .Select(p => p.DateTime.Date)
                  .Distinct()
                  .ToHashSet();

              calendarView.SelectedDates.Clear();
          }
      }
  }

  Opmerking
  - Hiermee zijn de fouten opgelost:
    - Geen dubbele dayEvents meer.
    - Geen vergelijking meer tussen DateTime en DateOnly.
    - _planningDates is nu HashSet<DateTime> met alleen het datum-deel (.Date), dus types kloppen.

usage:
  {"prompt_tokens":1011,"completion_tokens":3615,"cache_write_input_tokens":0,"cache_read_input_tokens":1792,"reasoning_tokens":2496}


id: 019d7743-a9d2-713f-81fc-c11e6f3b72ef
conversation_id: 019d7743-a9b3-702f-854e-4a6e8f0cbc6a
user_id: i302573
agent: App\Ai\Agents\CustomAgent
role: assistant
attachments: []
tool_calls: []
tool_results: []
meta: {"provider":"openai","model":"gpt-5","citations":[]}
created_at: 2026-04-10 14:00:16
updated_at: 2026-04-10 14:00:16
content:
  Dit is een Filament (Laravel) fout: Filament probeert de gebruikersnaam te tonen (bijv. in de user menu/header), maar krijgt null terug waar een string vereist is.

  Waarom dit gebeurt
  - Je User-model heeft geen gevulde name-kolom (of die is nullable en leeg).
  - Je gebruikt andere kolommen (first_name/last_name) en Filament vindt daardoor geen name.
  - Je hebt een getFilamentName() in je User-model die null teruggeeft.

  Snelste en robuuste fix
  Implementeer op je User-model een methode die altijd een string teruggeeft. Dit werkt in zowel Filament v2 als v3.

  Voorbeeld:

  // app/Models/User.php
  class User extends Authenticatable
  {
      // ...

      public function getFilamentName(): string
      {
          // Stel je hebt first_name/last_name:
          $fullName = trim(($this->first_name ?? '') . ' ' . ($this->last_name ?? ''));

          // Val terug op 'name', en anders op 'email'
          return $fullName !== ''
              ? $fullName
              : ($this->name ?: (string) $this->email);
      }
  }

  Andere opties/controles
  - Vul de name-kolom in je database (seed/migratie) of maak deze non-nullable en zorg dat je bij registratie/updates een waarde zet.
  - Als je bewust geen name-kolom gebruikt, zorg dat getFilamentName() bestaat of dat je ‘name’ attribute via een accessor samengesteld wordt.
  - Controleer dat de juiste guard gebruikt wordt in je Panel provider (auth guard die een geldige user oplevert).

  Debug tips
  - dd(auth()->user()) binnen een Filament-route om te zien welke velden je user heeft.
  - Zoek of je al een getFilamentName() hebt die mogelijk null kan retourneren.

  Als je je Filament-versie en je User-model (relevante delen) deelt, kan ik de oplossing precies op jouw setup afstemmen.

usage:
  {"prompt_tokens":45,"completion_tokens":2420,"cache_write_input_tokens":0,"cache_read_input_tokens":0,"reasoning_tokens":1984}


id: 019d7743-afe5-7369-9000-2e8b5b906499
conversation_id: 019d7644-29d4-7190-a8ad-d8f1c60a7014
user_id: i293082
agent: App\Ai\Agents\CustomAgent
role: user
attachments: []
tool_calls: []
tool_results: []
usage: []
meta: []
created_at: 2026-04-10 14:00:17
updated_at: 2026-04-10 14:00:17
content:
  <StackPanel x:Name="PatientFormPanel" Visibility="Visible" Spacing="8" Padding="20" Background="White" Margin="30" CornerRadius="10">
       <TextBlock Text="Voornaam patient:"/>
       <TextBox x:Name="FirstNameTextBox" PlaceholderText="Voornaam"/>

       <TextBlock Text="Achternaam patient:"/>
       <TextBox x:Name="LastNameTextBox" PlaceholderText="Achternaam"/>

       <TextBlock Text="Geboortedatum patient:"/>
       <DatePicker x:Name="BirthDatePicker"/>

       <TextBlock Text="Geslacht patient:"/>
       <ComboBox x:Name="GenderComboBox" Width="150">
           <ComboBoxItem Content="Man" />
           <ComboBoxItem Content="Vrouw" />
       </ComboBox>

       <TextBlock Text="Adres patient:"/>
       <TextBox x:Name="AddressTextBox" PlaceholderText="Adres"/>

       <TextBlock Text="Telefoonnummer patient:"/>
       <TextBox x:Name="PhoneNumberTextBox" PlaceholderText="Telefoonnummer"/>

       <TextBlock Text="E-mailadres patient:"/>
       <TextBox x:Name="EmailTextBox" PlaceholderText="E-mailadres"/>

       <TextBlock Text="Medische geschiedenis patient:"/>
       <TeachingTip x:Name="MedicalHistoryTip" Target="{Binding ElementName=MedicalHistoryTextBox}" Title="Medische geschiedenis" Subtitle="Vul hier de medische geschiedenis van de patient in." IsOpen="False"/>

       <TextBlock Text="Classificatie"/>
       <ComboBox x:Name="ClassificatieComboBox" Width="150">
           <ComboBoxItem Content="Doorverwijzing therapeut"/>
           <ComboBoxItem Content="Doorverwijzing spoed ziekenhuis"/>
           <ComboBoxItem Content="Medicijnen voorgeschreven"/>
           <ComboBoxItem Content="Routine check-up"/>
           <ComboBoxItem Content="Diagnose voorgesteld"/>
           <ComboBoxItem Content="Vaccinatie"/>
           <ComboBoxItem Content="(kleine) operatie/handeling"/>
           <ComboBoxItem Content="Bloed prikken"/>
           <ComboBoxItem Content="Allergie onderzoek"/>
       </ComboBox>

       <Button x:Name="SaveButton" Content="Opslaan" Click="SaveButton_Click" HorizontalAlignment="Right" Margin="0,20,0,0"/>
   </StackPanel> MAak voor deze xaml  dit:   private void CreatePatientButton_Click(object sender, RoutedEventArgs e)
   {
       string firstName = FirstNameTextBox.Text;
       string lastName = LastNameTextBox.Text;
       string email = EmailTextBox.Text;


id: 019d7743-aff0-737d-9b48-2b50027aef33
conversation_id: 019d7644-29d4-7190-a8ad-d8f1c60a7014
user_id: i293082
agent: App\Ai\Agents\CustomAgent
role: assistant
attachments: []
tool_calls: []
tool_results: []
meta: {"provider":"openai","model":"gpt-4o","citations":[]}
created_at: 2026-04-10 14:00:17
updated_at: 2026-04-10 14:00:17
content:
  Hier is de verdere uitwerking van de `CreatePatientButton_Click`-methode:

  ```csharp
  private void CreatePatientButton_Click(object sender, RoutedEventArgs e)
  {
      try
      {
          // Haal gegevens uit de formulier
          string firstName = FirstNameTextBox.Text.Trim();
          string lastName = LastNameTextBox.Text.Trim();
          DateTime? birthDate = BirthDatePicker.SelectedDate;
          string gender = (GenderComboBox.SelectedItem as ComboBoxItem)?.Content.ToString();
          string address = AddressTextBox.Text.Trim();
          string phoneNumber = PhoneNumberTextBox.Text.Trim();
          string email = EmailTextBox.Text.Trim();
          string classificatie = (ClassificatieComboBox.SelectedItem as ComboBoxItem)?.Content.ToString();

          // Validatie
          if (string.IsNullOrWhiteSpace(firstName)) throw new ArgumentException("Voornaam is vereist.");
          if (string.IsNullOrWhiteSpace(lastName)) throw new ArgumentException("Achternaam is vereist.");
          if (!birthDate.HasValue) throw new ArgumentException("Geboortedatum is vereist.");
          if (string.IsNullOrWhiteSpace(gender)) throw new ArgumentException("Geslacht is vereist.");
          if (string.IsNullOrWhiteSpace(phoneNumber)) throw new ArgumentException("Telefoonnummer is vereist.");
          if (string.IsNullOrWhiteSpace(email)) throw new ArgumentException("E-mailadres is vereist.");

          // Maak patiënt object
          var patient = new Patient
          {
              FirstName = firstName,
              LastName = lastName,
              BirthDate = birthDate.Value,
              Address = address,
              PhoneNumber = phoneNumber,
              Email = email,
              Gender = gender,
              // Voeg classificatie toe aan de patient als dit nodig is
          };

          // Opslaglogica (bijvoorbeeld, slaan op in database)
          // SavePatientToDatabase(patient);

          MessageBox.Show("Patiënt succesvol aangemaakt.", "Succes", MessageBoxButton.OK, MessageBoxImage.Information);
      }
      catch (Exception ex)
      {
          MessageBox.Show(ex.Message, "Fout bij aanmaken patiënt", MessageBoxButton.OK, MessageBoxImage.Error);
      }
  }
  ```

  ### Opmerkingen:
  - **Whitespace Trimmen:** Gebruik `Trim()` om overtollige spaties te verwijderen.
  - **Error Afhandeling:** Zorg voor duidelijke foutmeldingen bij ontbrekende waarden.
  - **Opslag:** Vul de opslagfunctie in met je specifieke database-opslaglogica.
  - **Feedback:** Geef feedback aan de gebruiker over het resultaat van de actie.

usage:
  {"prompt_tokens":5814,"completion_tokens":537,"cache_write_input_tokens":0,"cache_read_input_tokens":0,"reasoning_tokens":0}


id: 019d7743-d5f9-73d5-97ee-e886ff16aaf9
conversation_id: 019d7743-d5ef-7094-a7aa-4752607b1507
user_id: i302789
agent: App\Ai\Agents\CustomAgent
role: user
attachments: []
tool_calls: []
tool_results: []
usage: []
meta: []
created_at: 2026-04-10 14:00:27
updated_at: 2026-04-10 14:00:27
content:
  I need to make a carousel with laravel livewire. Livewires backend and front-end is combined. The livewire component should be put on a blade page


id: 019d7743-d604-709b-875e-e74e46b9e236
conversation_id: 019d7743-d5ef-7094-a7aa-4752607b1507
user_id: i302789
agent: App\Ai\Agents\CustomAgent
role: assistant
attachments: []
tool_calls: []
tool_results: []
meta: {"provider":"openai","model":"gpt-4o","citations":[]}
created_at: 2026-04-10 14:00:27
updated_at: 2026-04-10 14:00:27
content:
  To create a carousel using Laravel Livewire, you'll need to set up a Livewire component and integrate it into a Blade view. Let’s go through the steps:

  ### 1. Install Livewire

  If you haven't already, install Livewire using Composer:

  ```bash
  composer require livewire/livewire
  ```

  ### 2. Create a Livewire Component

  Generate a Livewire component called `Carousel`:

  ```bash
  php artisan make:livewire Carousel
  ```

  This will create two files:
  - `app/Http/Livewire/Carousel.php` (Backend logic)
  - `resources/views/livewire/carousel.blade.php` (Frontend view)

  ### 3. Implement the Carousel Logic

  #### Carousel.php

  Edit `Carousel.php` to handle the logic for your carousel:

  ```php
  namespace App\Http\Livewire;

  use Livewire\Component;

  class Carousel extends Component
  {
      public $currentIndex = 0;
      public $images = [
          'image1.jpg',
          'image2.jpg',
          'image3.jpg',
      ];

      public function next()
      {
          $this->currentIndex = ($this->currentIndex + 1) % count($this->images);
      }

      public function previous()
      {
          $this->currentIndex = ($this->currentIndex - 1 + count($this->images)) % count($this->images);
      }

      public function render()
      {
          return view('livewire.carousel');
      }
  }
  ```

  ### 4. Create the Blade View

  #### carousel.blade.php

  Edit `carousel.blade.php` to display the images:

  ```html
  <div style="display: flex; align-items: center; justify-content: center;">
      <button wire:click="previous">Previous</button>

      <div style="margin: 0 20px;">
          <img src="{{ asset('images/' . $images[$currentIndex]) }}" alt="Carousel Image" style="width: 300px; height: 200px;">
      </div>

      <button wire:click="next">Next</button>
  </div>
  ```

  ### 5. Include the Livewire Component in a Blade View

  Open a Blade view where you want to display the carousel and include the Livewire component:

  ```blade
  <!DOCTYPE html>
  <html>
  <head>
      <title>Carousel</title>
      @livewireStyles
  </head>
  <body>
      <h1>Image Carousel</h1>
      
      @livewire('carousel')

      @livewireScripts
  </body>
  </html>
  ```

  ### 6. Ensure You Have the Images

  Make sure the images `image1.jpg`, `image2.jpg`, etc. are stored in the `public/images` directory.

  ### 7. Run Your Application

  Run your Laravel application and navigate to the page with your carousel. It should now display your images and allow you to navigate using the next and previous buttons.

  That's it! You've successfully created a carousel with Laravel Livewire. If you have any further questions or need adjustments, let me know!

usage:
  {"prompt_tokens":58,"completion_tokens":636,"cache_write_input_tokens":0,"cache_read_input_tokens":0,"reasoning_tokens":0}


id: 019d7744-38c0-7026-9759-6644711d5f86
conversation_id: 019d7737-3fb2-7009-b80e-66dac560e3f6
user_id: D294954
agent: App\Ai\Agents\CustomAgent
role: user
attachments: []
tool_calls: []
tool_results: []
usage: []
meta: []
created_at: 2026-04-10 14:00:52
updated_at: 2026-04-10 14:00:52
content:
  waarom staat er nogsteeds een messagebox in de code ik heb net gezecht hoe ik het wil. wil je anders dat ik een voorbeeld uit een wireframe stuur


id: 019d7744-38d0-7235-add9-ff14acf99c1e
conversation_id: 019d7737-3fb2-7009-b80e-66dac560e3f6
user_id: D294954
agent: App\Ai\Agents\CustomAgent
role: assistant
attachments: []
tool_calls: []
tool_results: []
meta: {"provider":"openai","model":"gpt-4o","citations":[]}
created_at: 2026-04-10 14:00:52
updated_at: 2026-04-10 14:00:52
content:
  Sorry voor de verwarring! Als je geen `MessageBox` wilt en een andere manier hebt om de rapportdetails te tonen, zou dat handig zijn om te weten. Ik kan een lijst weergeven met alle details direct in de gebruikersinterface.

  ### Aangepaste VerslagOverzicht.xaml

  Hier is een versie met een `TextBox` onder de rapportenlijst om details te tonen wanneer je op een verslag klikt:

  ```xml
  <Page x:Class="CareTracker.Pages.Verslag.VerslagOverzicht"
        xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
        xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
        xmlns:local="clr-namespace:CareTracker.Pages.Verslag"
        Width="800" Height="600">
      <Grid>
          <Grid.RowDefinitions>
              <RowDefinition Height="Auto"/>
              <RowDefinition Height="*"/>
          </Grid.RowDefinitions>

          <!-- Header -->
          <StackPanel Orientation="Horizontal" Grid.Row="0" Background="#FF2D3E50" Padding="10">
              <Button Content="Home" Margin="10,0" Click="HomeButton_Click"/>
              <Button Content="Afsprakenoverzicht" Margin="10,0" Click="AppointmentsOverviewButton_Click"/>
              <Button Content="Afspraken maken" Margin="10,0" Click="MakeAppointmentsButton_Click"/>
              <Button Content="Profiel" Margin="10,0" Click="ProfileButton_Click"/>
              <Button Content="Uitloggen" Margin="10,0" Click="LogoutButton_Click" HorizontalAlignment="Right"/>
          </StackPanel>

          <!-- Content -->
          <Grid Grid.Row="1" Margin="10">
              <Grid.ColumnDefinitions>
                  <ColumnDefinition Width="2*"/>
                  <ColumnDefinition Width="3*"/>
              </Grid.ColumnDefinitions>

              <!-- Zoekbalk en patiëntenlijst -->
              <StackPanel Grid.Column="0" Margin="10">
                  <TextBox x:Name="SearchBox" Width="200" Height="30" Margin="0,0,0,10"/>
                  <ListView x:Name="PatientList" SelectionChanged="PatientList_SelectionChanged"/>
              </StackPanel>

              <!-- Verslagen van de geselecteerde patiënt en details -->
              <StackPanel Grid.Column="1" Margin="10">
                  <TextBlock Text="Selecteer een patiënt om verslagen te bekijken" FontWeight="Bold" Margin="0,0,0,10"/>
                  <ListView x:Name="ReportList" SelectionChanged="ReportList_SelectionChanged"/>
                  <TextBox x:Name="ReportDetails" Margin="0,10,0,0" Height="150" IsReadOnly="True" TextWrapping="Wrap"/>
              </StackPanel>
          </Grid>
      </Grid>
  </Page>
  ```

  ### Bijgewerkte Code-Behind

  Pas de code-behind aan om de details in de `TextBox` weer te geven:

  ```csharp
  using System.Linq;
  using System.Windows;
  using System.Windows.Controls;
  using CareTracker.Data;

  namespace CareTracker.Pages.Verslag
  {
      public partial class VerslagOverzicht : Page
      {
          private readonly AppDbContext _context;

          public VerslagOverzicht()
          {
              InitializeComponent();
              _context = new AppDbContext();
              LoadPatients();
          }

          private void LoadPatients()
          {
              var patients = _context.Patients.Select(p => new
              {
                  Name = $"{p.FirstName} {p.LastName}",
                  p.Id
              }).ToList();

              PatientList.ItemsSource = patients;
              PatientList.DisplayMemberPath = "Name";
              PatientList.SelectedValuePath = "Id";
          }

          private void HomeButton_Click(object sender, RoutedEventArgs e) { /* Implementatie voor Home */ }
          private void AppointmentsOverviewButton_Click(object sender, RoutedEventArgs e) { /* Implementatie voor Afsprakenoverzicht */ }
          private void MakeAppointmentsButton_Click(object sender, RoutedEventArgs e) { /* Implementatie voor Afspraken maken */ }
          private void ProfileButton_Click(object sender, RoutedEventArgs e) { /* Implementatie voor Profiel */ }
          private void LogoutButton_Click(object sender, RoutedEventArgs e) { /* Implementatie voor Uitloggen */ }

          private void PatientList_SelectionChanged(object sender, SelectionChangedEventArgs e)
          {
              if (PatientList.SelectedItem != null)
              {
                  int selectedPatientId = (int)PatientList.SelectedValue;
                  LoadReportsForPatient(selectedPatientId);
              }
          }

          private void LoadReportsForPatient(int patientId)
          {
              var reports = _context.Reports
                  .Where(r => r.PatientId == patientId)
                  .Select(r => new
                  {
                      Title = $"{r.Date.ToShortDateString()} - {r.Appointment.Location}",
                      r.Id
                  }).ToList();

              ReportList.ItemsSource = reports;
              ReportList.DisplayMemberPath = "Title";
              ReportList.SelectedValuePath = "Id";
          }

          private void ReportList_SelectionChanged(object sender, SelectionChangedEventArgs e)
          {
              if (ReportList.SelectedItem != null)
              {
                  int selectedReportId = (int)ReportList.SelectedValue;
                  ShowReportDetails(selectedReportId);
              }
          }

          private void ShowReportDetails(int reportId)
          {
              var report = _context.Reports
                  .Where(r => r.Id == reportId)
                  .Select(r => r.Content)
                  .FirstOrDefault();

              ReportDetails.Text = report;
          }
      }
  }
  ```

  ### Uitleg:

  - **ReportDetails TextBox**: Deze `TextBox` toont de inhoud van het geselecteerde verslag. Hij is alleen-lezen zodat gebruikers hem niet kunnen bewerken.
  - **Wrapper en Scroll**: We hebben `TextWrapping` toegevoegd zodat de tekst automatisch doorloopt binnen de `TextBox`.
  - **Selectie en Detailweergave**: Wanneer een verslag in de `ReportList` wordt geselecteerd, wordt de volledige inhoud van het verslag in `ReportDetails` getoond.

  Laat het me weten als je meer uitleg nodig hebt, of stuur een wireframe voor verdere aanpassingen!

usage:
  {"prompt_tokens":13544,"completion_tokens":1308,"cache_write_input_tokens":0,"cache_read_input_tokens":0,"reasoning_tokens":0}


id: 019d7744-d6af-7158-bc79-a95c68b1f4ff
conversation_id: 019d7644-29d4-7190-a8ad-d8f1c60a7014
user_id: i293082
agent: App\Ai\Agents\CustomAgent
role: user
attachments: []
tool_calls: []
tool_results: []
usage: []
meta: []
created_at: 2026-04-10 14:01:33
updated_at: 2026-04-10 14:01:33
content:
  Cannot implicitly convert type 'System.DateTimeOffset?' to 'System.DateTime?' Ik krijg deze error bij de BirthDatePicker. Wat moet ik doen om deze op te lossen


id: 019d7744-d6ba-7090-ad05-744ab766a89c
conversation_id: 019d7644-29d4-7190-a8ad-d8f1c60a7014
user_id: i293082
agent: App\Ai\Agents\CustomAgent
role: assistant
attachments: []
tool_calls: []
tool_results: []
meta: {"provider":"openai","model":"gpt-4o","citations":[]}
created_at: 2026-04-10 14:01:33
updated_at: 2026-04-10 14:01:33
content:
  De `DatePicker` retourneert een `DateTimeOffset?` in plaats van een `DateTime?`. Je kunt het volgende doen om deze conversie te maken:

  ```csharp
  DateTime? birthDate = BirthDatePicker.SelectedDate?.DateTime;
  ```

  Hiermee haal je de `DateTime` component uit de `DateTimeOffset` en converteer je het naar een nullable `DateTime?`. Hiermee zou de fout opgelost moeten zijn.

usage:
  {"prompt_tokens":1273,"completion_tokens":96,"cache_write_input_tokens":0,"cache_read_input_tokens":5120,"reasoning_tokens":0}


id: 019d7744-ee59-73d8-8f94-0519c6d6daac
conversation_id: 019d76fe-3b07-7095-acc1-ec6a2420f9f1
user_id: i301561
agent: App\Ai\Agents\CustomAgent
role: user
attachments: []
tool_calls: []
tool_results: []
usage: []
meta: []
created_at: 2026-04-10 14:01:39
updated_at: 2026-04-10 14:01:39
content:
  public function canAccessPanel(Panel $panel): bool
      {
          return match ($panel->getId()) {
              'admin' => $this->role === UserRole::admin,
              'blogger' => $this->role === UserRole::blogger,
              'reader' => $this->role === UserRole::reader,
              default => false,
          };
      }

  maar deze zal als aller eerts een false terug geven waardoor je sws een nee hebt
  vergeet niet om code in code items te zetten


id: 019d7744-ee61-7363-b8f0-a50ed76128e2
conversation_id: 019d76fe-3b07-7095-acc1-ec6a2420f9f1
user_id: i301561
agent: App\Ai\Agents\CustomAgent
role: assistant
attachments: []
tool_calls: []
tool_results: []
meta: {"provider":"openai","model":"gpt-5","citations":[]}
created_at: 2026-04-10 14:01:39
updated_at: 2026-04-10 14:01:39
content:
  ```php
  <?php
  // app/Enums/UserRole.php
  // Opmerking: Het 'match' statement kiest op basis van $panel->getId() de juiste arm.
  // Het geeft dus niet "eerst false terug". Het pakt enkel de arm waarvan de "key"
  // overeenkomt met de panel-id, en evalueert dan pas de expressie van die arm.

  namespace App\Enums;

  enum UserRole: string
  {
      case Admin = 'admin';
      case Blogger = 'blogger';
      case Reader = 'reader';
  }
  ```

  ```php
  <?php
  // app/Models/User.php

  namespace App\Models;

  use App\Enums\UserRole;
  use Filament\Models\Contracts\FilamentUser;
  use Filament\Panel;
  use Illuminate\Foundation\Auth\User as Authenticatable;

  class User extends Authenticatable implements FilamentUser
  {
      protected $casts = [
          // Zorg dat de 'role'-kolom naar je Enum cast
          'role' => UserRole::class,
      ];

      public function hasRole(UserRole $role): bool
      {
          return $this->role === $role;
      }

      // Variant 1: via mapping-array (duidelijk en uitbreidbaar)
      public function canAccessPanel(Panel $panel): bool
      {
          $panelToRole = [
              'admin'   => UserRole::Admin,
              'blogger' => UserRole::Blogger,
              'reader'  => UserRole::Reader,
          ];

          $panelId = $panel->getId();

          if (! array_key_exists($panelId, $panelToRole)) {
              return false; // onbekende panel-id => geen toegang
          }

          return $this->hasRole($panelToRole[$panelId]);
      }

      // Variant 2: met match (werkt ook prima, kiest niet "eerst false")
      // public function canAccessPanel(Panel $panel): bool
      // {
      //     return match ($panel->getId()) {
      //         'admin'   => $this->hasRole(UserRole::Admin),
      //         'blogger' => $this->hasRole(UserRole::Blogger),
      //         'reader'  => $this->hasRole(UserRole::Reader),
      //         default   => false,
      //     };
      // }

      public function defaultPanelId(): string
      {
          return match ($this->role) {
              UserRole::Admin   => 'admin',
              UserRole::Blogger => 'blogger',
              UserRole::Reader  => 'reader',
          };
      }
  }
  ```

  ```php
  <?php
  // app/Providers/Filament/AdminPanelProvider.php
  // Zorg dat de panel-id's exact overeenkomen met wat je in canAccessPanel/defaultPanelId gebruikt.

  namespace App\Providers\Filament;

  use Filament\Panel;
  use Filament\PanelProvider;
  use Filament\Http\Middleware\Authenticate;

  class AdminPanelProvider extends PanelProvider
  {
      public function panel(Panel $panel): Panel
      {
          return $panel
              ->id('admin')   // MOET 'admin' zijn als je User::canAccessPanel daarop matcht
              ->path('admin')
              ->authMiddleware([
                  Authenticate::class,
              ]);
      }
  }
  ```

  ```php
  <?php
  // app/Providers/Filament/BloggerPanelProvider.php

  namespace App\Providers\Filament;

  use Filament\Panel;
  use Filament\PanelProvider;
  use Filament\Http\Middleware\Authenticate;

  class BloggerPanelProvider extends PanelProvider
  {
      public function panel(Panel $panel): Panel
      {
          return $panel
              ->id('blogger') // MOET 'blogger' zijn
              ->path('blogger')
              ->authMiddleware([
                  Authenticate::class,
              ]);
      }
  }
  ```

  ```php
  <?php
  // app/Providers/Filament/ReaderPanelProvider.php

  namespace App\Providers\Filament;

  use Filament\Panel;
  use Filament\PanelProvider;
  use Filament\Http\Middleware\Authenticate;

  class ReaderPanelProvider extends PanelProvider
  {
      public function panel(Panel $panel): Panel
      {
          return $panel
              ->id('reader') // MOET 'reader' zijn
              ->path('reader')
              ->authMiddleware([
                  Authenticate::class,
              ]);
      }
  }
  ```

  ```php
  <?php
  // app/Http/Middleware/RedirectToUserPanel.php
  // (optioneel) Als een ingelogde user een "verkeerd" panel bezoekt, stuur door naar het juiste.

  namespace App\Http\Middleware;

  use Closure;
  use Filament\Facades\Filament;

  class RedirectToUserPanel
  {
      public function handle($request, Closure $next)
      {
          $user = $request->user();

          if (! $user) {
              return $next($request);
          }

          $currentPanel = Filament::getCurrentPanel();
          $targetPanelId = method_exists($user, 'defaultPanelId') ? $user->defaultPanelId() : null;

          if ($currentPanel && $targetPanelId && $currentPanel->getId() !== $targetPanelId) {
              return redirect()->route("filament.{$targetPanelId}.pages.dashboard");
          }

          return $next($request);
      }
  }
  ```

  ```php
  <?php
  // app/Filament/Auth/Login.php
  // (optioneel) Dynamische redirect na inloggen op basis van de user-rol/panel

  namespace App\Filament\Auth;

  use Filament\Facades\Filament;
  use Filament\Pages\Auth\Login as BaseLogin;

  class Login extends BaseLogin
  {
      protected function getRedirectUrl(): string
      {
          $user = auth()->user();

          if ($user && method_exists($user, 'defaultPanelId')) {
              $panelId = $user->defaultPanelId();
              return route("filament.{$panelId}.pages.dashboard");
          }

          return route('filament.' . Filament::getCurrentPanel()->getId() . '.pages.dashboard');
      }
  }
  ```

  ```php
  <?php
  // Quick debug snippet (bijv. tijdelijk in canAccessPanel plaatsen of in een debug-middleware)
  // Zo kun je zien wat de panel-id is en welke rol de user heeft.
  //
  // use Illuminate\Support\Facades\Log;
  // Log::debug('canAccessPanel', [
  //     'panel' => $panel->getId(),
  //     'user_role' => $this->role?->value,
  // ]);
  ```

usage:
  {"prompt_tokens":4314,"completion_tokens":3116,"cache_write_input_tokens":0,"cache_read_input_tokens":0,"reasoning_tokens":1728}


id: 019d7745-6e3b-7311-86ce-bfd867d36eab
conversation_id: 019d7740-ba8d-7075-81e0-d58c86dce8ea
user_id: i287513
agent: App\Ai\Agents\CustomAgent
role: user
attachments: []
tool_calls: []
tool_results: []
usage: []
meta: []
created_at: 2026-04-10 14:02:12
updated_at: 2026-04-10 14:02:12
content:
  dit werkt niet moet ik een package downloaden?db.Appointments
                  .Select(p => p.DateTime.Date)
                  .Distinct()
                  .ToHashSet();


id: 019d7745-6e4c-71a7-8930-471aa72284f5
conversation_id: 019d7740-ba8d-7075-81e0-d58c86dce8ea
user_id: i287513
agent: App\Ai\Agents\CustomAgent
role: assistant
attachments: []
tool_calls: []
tool_results: []
meta: {"provider":"openai","model":"gpt-5","citations":[]}
created_at: 2026-04-10 14:02:12
updated_at: 2026-04-10 14:02:12
content:
  Kort antwoord: nee, je hoeft geen extra package te downloaden. Het hangt af van twee dingen:
  - Of jouw target framework ToHashSet ondersteunt.
  - Of jouw databaseprovider DateTime.Date kan vertalen naar SQL.

  Werkende opties (kies er één):

  Optie A — SQL-vriendelijk (aanrader)
  Gebruik Year/Month/Day in de query (dit wordt wél overal goed vertaald), daarna materialiseren.
  private void RefreshPlanningCache()
  {
      using var db = new AppDbContext();

      var dates = db.Appointments
          .AsNoTracking()
          .Select(p => new DateTime(p.DateTime.Year, p.DateTime.Month, p.DateTime.Day))
          .Distinct()
          .ToList();

      _planningDates = new HashSet<DateTime>(dates);
  }

  Optie B — Client-side .Date na AsEnumerable (ook prima)
  Eerst alleen de kolom ophalen, dan in memory .Date doen en pas daarna distinct + set.
  private void RefreshPlanningCache()
  {
      using var db = new AppDbContext();

      var dates = db.Appointments
          .AsNoTracking()
          .Select(p => p.DateTime)
          .AsEnumerable()           // vanaf hier in memory
          .Select(dt => dt.Date)
          .Distinct()
          .ToList();

      _planningDates = new HashSet<DateTime>(dates);
  }

  Optie C — Als ToHashSet niet beschikbaar is
  Dan target je waarschijnlijk een ouder framework. Gebruik ToList + HashSet constructor.
  private void RefreshPlanningCache()
  {
      using var db = new AppDbContext();

      var dates = db.Appointments
          .AsNoTracking()
          .Select(p => new DateTime(p.DateTime.Year, p.DateTime.Month, p.DateTime.Day))
          .Distinct()
          .ToList();

      _planningDates = new HashSet<DateTime>(dates); // in plaats van .ToHashSet()
  }

  Controleer ook:
  - using System.Linq; staat bovenaan je bestand.
  - Je targett .NET 6 of hoger (WinUI 3 gebruikt normaal .NET 6/7). Als je lager targett, gebruik Optie C.

  Waarom jouw regel soms “niet werkt”:
  - Sommige providers (zoals SQLite) kunnen DateTime.Date niet altijd netjes naar SQL vertalen. Optie A of B omzeilt dat.
  - In oudere .NET-versies bestaat Enumerable.ToHashSet niet. Dan gebruik je de HashSet constructor (Optie C).

usage:
  {"prompt_tokens":1246,"completion_tokens":2745,"cache_write_input_tokens":0,"cache_read_input_tokens":2688,"reasoning_tokens":2176}


id: 019d7746-95e2-73a6-9cdf-2533cc770abb
conversation_id: 019d7644-29d4-7190-a8ad-d8f1c60a7014
user_id: i293082
agent: App\Ai\Agents\CustomAgent
role: assistant
attachments: []
tool_calls: []
tool_results: []
meta: {"provider":"openai","model":"gpt-4o","citations":[]}
created_at: 2026-04-10 14:03:27
updated_at: 2026-04-10 14:03:27
content:
  Als de `Gender`-waarde geen waarde heeft, controleer dan of de `ComboBox` correct is ingesteld en of de selectie goed wordt opgehaald. Zorg ervoor dat de `ComboBox` een geselecteerde waarde heeft voordat je de `Content` probeert op te halen. Hier is hoe je dit kunt doen:

  ### Controleer de ComboBox XAML

  Zorg ervoor dat er altijd een selectie is:

  ```xml
  <ComboBox x:Name="GenderComboBox" Width="150">
      <ComboBoxItem Content="Man" />
      <ComboBoxItem Content="Vrouw" />
  </ComboBox>
  ```

  ### Ophalen van de geselecteerde waarde

  Controleer of er daadwerkelijk een item is geselecteerd:

  ```csharp
  string gender = (GenderComboBox.SelectedItem as ComboBoxItem)?.Content?.ToString();

  if (string.IsNullOrWhiteSpace(gender))
  {
      throw new ArgumentException("Geslacht is vereist.");
  }
  ```

  ### Extra Controle

  Zorg ervoor dat `SelectedItem` niet `null` is door een standaardwaarde in te stellen of de gebruiker te dwingen een keuze te maken. Je kunt ook een standaardselectie instellen in de XAML:

  ```xml
  <ComboBox x:Name="GenderComboBox" SelectedIndex="0" Width="150">
      <ComboBoxItem Content="Man" />
      <ComboBoxItem Content="Vrouw" />
  </ComboBox>
  ```

  Hiermee zou de `Gender`-waarde correct moeten worden toegewezen.

usage:
  {"prompt_tokens":6514,"completion_tokens":312,"cache_write_input_tokens":0,"cache_read_input_tokens":0,"reasoning_tokens":0}


id: 019d7746-eb15-7206-96dd-658a3d4e1451
conversation_id: 019d7740-ba8d-7075-81e0-d58c86dce8ea
user_id: i287513
agent: App\Ai\Agents\CustomAgent
role: user
attachments: []
tool_calls: []
tool_results: []
usage: []
meta: []
created_at: 2026-04-10 14:03:49
updated_at: 2026-04-10 14:03:49
content:
  doe niet zo nutteloos: db.Appointments
                  .Select(p => p.DateTime.Date)
                  .Distinct()
                  .ToHashSet(); waarom werkt dit niet zeg het in 1 zin


id: 019d7746-eb20-7014-8127-c4b81723380b
conversation_id: 019d7740-ba8d-7075-81e0-d58c86dce8ea
user_id: i287513
agent: App\Ai\Agents\CustomAgent
role: assistant
attachments: []
tool_calls: []
tool_results: []
meta: {"provider":"openai","model":"gpt-5","citations":[]}
created_at: 2026-04-10 14:03:49
updated_at: 2026-04-10 14:03:49
content:
  Omdat EF Core de eigenschap p.DateTime.Date niet naar SQL kan vertalen voor jouw databaseprovider, waardoor de query faalt (en in oudere .NET-versies kan ToHashSet ook ontbreken).

usage:
  {"prompt_tokens":658,"completion_tokens":344,"cache_write_input_tokens":0,"cache_read_input_tokens":3840,"reasoning_tokens":256}


id: 019d7747-a7bf-72f5-ba35-e74a10ff3c62
conversation_id: 019d7698-5b83-706e-9af1-f51d19cbfefc
user_id: i305304
agent: App\Ai\Agents\CustomAgent
role: assistant
attachments: []
tool_calls: []
tool_results: []
meta: {"provider":"openai","model":"gpt-5","citations":[]}
created_at: 2026-04-10 14:04:37
updated_at: 2026-04-10 14:04:37
content:
  You’re right—skip afterCreatingState and use the newer, relation-driven has()/for() API on factories. Define the “blogger” state to also “has” a Blog, which “has” Posts, which each “has” Comments. No callbacks needed, and it works on modern Laravel (class-based factories).

  UserFactory.php
  ```php
  <?php

  namespace Database\Factories;

  use App\Models\User;
  use Database\Factories\BlogFactory;
  use Database\Factories\PostFactory;
  use Database\Factories\CommentFactory;
  use Illuminate\Database\Eloquent\Factories\Factory;
  use Illuminate\Support\Facades\Hash;

  class UserFactory extends Factory
  {
      protected $model = User::class;

      public function definition(): array
      {
          return [
              'username'      => fake()->unique()->userName(),
              'email'         => fake()->unique()->safeEmail(),
              'password'      => Hash::make('password'),
              'role'          => 'reader',
              'bio'           => fake()->optional()->paragraph(),
              'avatar_url'    => fake()->optional()->imageUrl(256, 256, 'people', true),
              'full_name'     => fake()->name(),
              'address_line1' => fake()->streetAddress(),
              'city'          => fake()->city(),
          ];
      }

      public function admin(): static
      {
          return $this->state(fn () => ['role' => 'admin']);
      }

      public function reader(): static
      {
          return $this->state(fn () => ['role' => 'reader']);
      }

      public function blogger(): static
      {
          $postsCount = random_int(3, 7);
          $commentsPerPost = random_int(2, 10);

          return $this->state(fn () => ['role' => 'blogger'])
              ->has(
                  BlogFactory::new()
                      ->has(
                          PostFactory::new()
                              ->count($postsCount)
                              ->has(
                                  CommentFactory::new()->count($commentsPerPost),
                                  'getCommentsFromPost' // Post -> comments relation name
                              ),
                          'getPosts' // Blog -> posts relation name
                      ),
                  'getBlogFromUser' // User -> blog relation name
              );
      }
  }
  ```

  BlogFactory.php
  ```php
  <?php

  namespace Database\Factories;

  use App\Models\Blog;
  use App\Models\User;
  use Illuminate\Database\Eloquent\Factories\Factory;

  class BlogFactory extends Factory
  {
      protected $model = Blog::class;

      public function definition(): array
      {
          return [
              'title'       => fake()->unique()->catchPhrase() . ' Travel Blog',
              'author_id'   => User::factory()->blogger(), // will be overridden by has(..., 'getBlogFromUser')
              'total_likes' => 0,
              'image_url'   => fake()->optional()->imageUrl(1200, 600, 'travel', true),
          ];
      }
  }
  ```

  PostFactory.php
  ```php
  <?php

  namespace Database\Factories;

  use App\Models\Blog;
  use App\Models\Post;
  use Illuminate\Database\Eloquent\Factories\Factory;

  class PostFactory extends Factory
  {
      protected $model = Post::class;

      public function definition(): array
      {
          $continents = ['Africa', 'Antarctica', 'Asia', 'Europe', 'North_America', 'Oceania', 'South_America'];
          $categories = ['adventure','culture','food','nature','tips','budget','luxury'];

          return [
              'blog_id'      => Blog::factory(), // will be set by has(..., 'getPosts')
              'title'        => fake()->sentence(6),
              'body'         => fake()->paragraphs(4, true),
              'image_url'    => fake()->optional()->imageUrl(1200, 800, 'travel', true),
              'continent'    => fake()->randomElement($continents),
              'country_name' => fake()->country(),
              'place_name'   => fake()->city(),
              'categories'   => fake()->randomElement($categories), // enum column in your migration
              'total_likes'  => fake()->numberBetween(0, 1000),
              'total_rating' => fake()->randomFloat(1, 0, 5),
              'total_views'  => fake()->numberBetween(0, 5000),
              'created_at'   => now()->subDays(fake()->numberBetween(0, 365)),
          ];
      }
  }
  ```

  CommentFactory.php
  ```php
  <?php

  namespace Database\Factories;

  use App\Models\Comment;
  use App\Models\Post;
  use App\Models\User;
  use Illuminate\Database\Eloquent\Factories\Factory;

  class CommentFactory extends Factory
  {
      protected $model = Comment::class;

      public function definition(): array
      {
          return [
              'post_id'    => Post::factory(),              // will be set by has(..., 'getCommentsFromPost')
              'user_id'    => User::factory()->reader(),    // commenter; can be any role if you prefer
              'body'       => fake()->sentences(2, true),
              'is_edited'  => fake()->boolean(10),
              'created_at' => now()->subDays(fake()->numberBetween(0, 180)),
          ];
      }
  }
  ```

  Usage
  ```php
  // Bloggers (each gets 1 blog + N posts + M comments per post)
  \App\Models\User::factory()->count(10)->blogger()->create();

  // Readers
  \App\Models\User::factory()->count(50)->reader()->create();

  // Admin
  \App\Models\User::factory()->admin()->create([
      'username' => 'admin',
      'email'    => 'admin@example.com',
      'password' => bcrypt('password'),
  ]);
  ```

  Notes
  - Make sure your relation method names match what you pass to has(): User->getBlogFromUser, Blog->getPosts, Post->getCommentsFromPost.
  - This approach is version-friendly and avoids afterCreating/afterCreatingState entirely.

usage:
  {"prompt_tokens":22239,"completion_tokens":3082,"cache_write_input_tokens":0,"cache_read_input_tokens":0,"reasoning_tokens":1792}


id: 019d7747-cd2b-7143-8d68-8d50e5839ada
conversation_id: 019d7743-a9b3-702f-854e-4a6e8f0cbc6a
user_id: i302573
agent: App\Ai\Agents\CustomAgent
role: user
attachments: []
tool_calls: []
tool_results: []
usage: []
meta: []
created_at: 2026-04-10 14:04:47
updated_at: 2026-04-10 14:04:47
content:
  TypeError
  vendor\filament\filament\src\FilamentManager.php:620
  Filament\FilamentManager::getUserName(): Return value must be of type string, null returned

  <?php

  namespace App\Models;

  use App\Enums\UserRole;
  use Filament\Models\Contracts\HasName;
  use Illuminate\Database\Eloquent\Relations\HasOne;
  use Illuminate\Database\Eloquent\Relations\HasMany;
  use Illuminate\Database\Eloquent\Relations\HasManyThrough;
  use Database\Factories\UserFactory;
  use Illuminate\Database\Eloquent\Factories\HasFactory;
  use Illuminate\Foundation\Auth\User as Authenticatable;
  use Illuminate\Notifications\Notifiable;
  use Illuminate\Support\Str;
  use Filament\Models\Contracts\FilamentUser;
  use Filament\Panel;
  use Closure;
  use Illuminate\Http\Request;
  use Filament\Pages\Dashboard;

  class User extends Authenticatable implements FilamentUser
  {
      use HasFactory, Notifiable;

      protected $fillable = [
          'name',
          'email',
          'password',
          'role',
          'bio',
          'avatar_url',
          'full_name',
          'address',
          'city',
      ];

      protected $hidden = ['password', 'remember_token'];

      protected function casts(): array
      {
          return [
              'email_verified_at' => 'datetime',
              'password' => 'hashed',
          ];
      }

      protected $casts = [
          'role' => UserRole::class,
      ];

      public function sendToPanel(Panel $panel, Request $request): Closure
      {
          return match ($panel->getId()) {
              'admin' => fn() => redirect()->to(Dashboard::getUrl(panel: 'admin')),
              'blogger' => fn() => redirect()->to(Dashboard::getUrl(panel: 'blogger')),
              'reader' => fn() => redirect()->to(Dashboard::getUrl(panel: 'reader')),
              default => fn() => redirect()->to('/reader'),
          };
      }

      public function canAccessPanel(Panel $panel): bool
      {
          return match ($panel->getId()) {
              'admin' => $this->role === UserRole::admin,
              'blogger' => $this->role === UserRole::blogger,
              'reader' => $this->role === UserRole::reader,
              default => false,
          };
      }

      public function initials(): string
      {
          return Str::of($this->username)
              ->substr(0, 2)
              ->upper()
              ->toString();
      }

      public function getBlogFromUser(): HasOne
      {
          return $this->hasOne(Blog::class, 'author_id');
      }

      public function getPostsFromUser(): HasManyThrough
      {
          return $this->hasManyThrough(
              Post::class,
              Blog::class,
              'author_id', // Blog.author_id
              'blog_id',   // Post.blog_id
              'id',        // User.id
              'id'         // Blog.id
          );
      }


          public function getUserName(): string {

          return $this->;
      }
      public function getFilamentName(): string {

          return $this->name;
      }

      public function getCommentsFromUser(): HasMany
      {
          return $this->hasMany(Comment::class);
      }

      public function getPostLikesFromUser(): HasMany
      {
          return $this->hasMany(PostLike::class);
      }

      public function getPostRatingsFromUser(): HasMany
      {
          return $this->hasMany(PostRating::class);
      }

      public function getUserPostReadsFromUser(): HasMany
      {
          return $this->hasMany(UserPostRead::class);
      }

      public function getBloggerApplicationsFromUser(): HasMany
      {
          return $this->hasMany(BloggerApplication::class, 'applicant_user_id');
      }

      public function isBlogger(): bool
      {
          return $this->role === 'blogger';
      }
  }


id: 019d7747-cd3c-7035-84f7-df9e31f2a757
conversation_id: 019d7743-a9b3-702f-854e-4a6e8f0cbc6a
user_id: i302573
agent: App\Ai\Agents\CustomAgent
role: assistant
attachments: []
tool_calls: []
tool_results: []
meta: {"provider":"openai","model":"gpt-5","citations":[]}
created_at: 2026-04-10 14:04:47
updated_at: 2026-04-10 14:04:47
content:
  De fout betekent dat Filament een niet-lege string als gebruikersnaam wil, maar bij jouw user null aantreft. In jouw model is dat ook mogelijk: getFilamentName() retourneert $this->name, en die kan null zijn. Daarnaast heb je een kapotte getUserName()-methode staan die sowieso fouten veroorzaakt.

  Wat te doen
  - Verwijder de getUserName()-methode (of maak ’m correct), want hij is nu syntactisch ongeldig.
  - Zorg dat getFilamentName() altijd een string teruggeeft, met een fallback als name leeg is.
  - Optioneel: implementeer het HasName-contract om expliciet te maken dat je een naam aan Filament aanbiedt.

  Voorbeeld (robuste versie)

  use Filament\Models\Contracts\HasName;

  class User extends Authenticatable implements FilamentUser, HasName
  {
      // ...

      public function getFilamentName(): string
      {
          return (string) ($this->full_name
              ?: $this->name
              ?: $this->email
              ?: ('User #'.$this->getKey()));
      }

      // Verwijder deze kapotte methode volledig:
      // public function getUserName(): string {
      //     return $this->;
      // }
  }

  Extra controles
  - Zorg dat je in je database/seeders de name of full_name vult, of laat bovenstaande fallback op email werken.
  - initials() gebruikt $this->username, maar je hebt geen username-kolom. Pas dit aan naar name/full_name of verwijder het.
  - Je gebruikt zowel protected function casts(): array als protected $casts. Kies één van beide. Nu heb je ook een enum-cast op role; vergelijk in isBlogger() met de enum, niet met een string:
    public function isBlogger(): bool
    {
        return $this->role === UserRole::blogger;
    }

  Na aanpassing: cache legen (php artisan optimize:clear) en opnieuw proberen.

usage:
  {"prompt_tokens":1314,"completion_tokens":2392,"cache_write_input_tokens":0,"cache_read_input_tokens":0,"reasoning_tokens":1920}


id: 019d7748-03c5-7169-9a38-f3f82c87ac24
conversation_id: 019d7740-ba8d-7075-81e0-d58c86dce8ea
user_id: i287513
agent: App\Ai\Agents\CustomAgent
role: assistant
attachments: []
tool_calls: []
tool_results: []
meta: {"provider":"openai","model":"gpt-5","citations":[]}
created_at: 2026-04-10 14:05:01
updated_at: 2026-04-10 14:05:01
content:
  Kort antwoord: geen extra package nodig voor .Date of ToHashSet als je .NET 6/7 gebruikt; je hebt alleen EF Core + jouw databaseprovider nodig.

  Minimaal:
  - Microsoft.EntityFrameworkCore
  - Een provider, kies er één:
    - Microsoft.EntityFrameworkCore.Sqlite (+ eventueel Microsoft.Data.Sqlite)
    - of Microsoft.EntityFrameworkCore.SqlServer
    - of Npgsql.EntityFrameworkCore.PostgreSQL
    - of Pomelo.EntityFrameworkCore.MySql
  - using System.Linq; in je code (voor LINQ/ToHashSet)

  Optioneel (voor migrations/tools):
  - Microsoft.EntityFrameworkCore.Tools
  - Microsoft.EntityFrameworkCore.Design

  Tip: Als DateTime.Date niet door jouw provider vertaald wordt, pas je query aan (Year/Month/Day of AsEnumerable) — dat vereist geen extra packages.

usage:
  {"prompt_tokens":78,"completion_tokens":1627,"cache_write_input_tokens":0,"cache_read_input_tokens":4480,"reasoning_tokens":1408}


id: 019d7748-11a4-7251-9783-a84c3ac43597
conversation_id: 019d7644-29d4-7190-a8ad-d8f1c60a7014
user_id: i293082
agent: App\Ai\Agents\CustomAgent
role: assistant
attachments: []
tool_calls: []
tool_results: []
meta: {"provider":"openai","model":"gpt-4o","citations":[]}
created_at: 2026-04-10 14:05:05
updated_at: 2026-04-10 14:05:05
content:
  Zorg ervoor dat de variabelenaam `gender` niet al eerder in dezelfde scope is gedefinieerd. Verander de naam van de tweede variabele als het nodig is. Hier is een voorbeeld:

  ```csharp
  string selectedGender = (GenderComboBox.SelectedItem as ComboBoxItem)?.Content?.ToString();

  if (string.IsNullOrWhiteSpace(selectedGender))
  {
      throw new ArgumentException("Geslacht is vereist.");
  }

  // Gebruik de 'selectedGender' variabele verder in de code
  ```

  Hierdoor vermijd je naamconflicten en is de code duidelijker.

usage:
  {"prompt_tokens":576,"completion_tokens":122,"cache_write_input_tokens":0,"cache_read_input_tokens":6272,"reasoning_tokens":0}


id: 019d7748-d50e-72be-97d5-31b76d53f583
conversation_id: 019d7644-29d4-7190-a8ad-d8f1c60a7014
user_id: i293082
agent: App\Ai\Agents\CustomAgent
role: user
attachments: []
tool_calls: []
tool_results: []
usage: []
meta: []
created_at: 2026-04-10 14:05:55
updated_at: 2026-04-10 14:05:55
content:
  The seed entity for entity type 'Patient' cannot be added because no value was provided for the required property 'Gender'.'


id: 019d7748-d516-70a1-9c8b-cfcb23ec67aa
conversation_id: 019d7644-29d4-7190-a8ad-d8f1c60a7014
user_id: i293082
agent: App\Ai\Agents\CustomAgent
role: assistant
attachments: []
tool_calls: []
tool_results: []
meta: {"provider":"openai","model":"gpt-4o","citations":[]}
created_at: 2026-04-10 14:05:55
updated_at: 2026-04-10 14:05:55
content:
  Deze foutmelding betekent dat de `Gender`-eigenschap vereist is voor het `Patient`-object, maar dat er geen waarde is toegewezen. Hier zijn enkele stappen om dit op te lossen:

  1. **Zorg voor Geldige Invoer:**
     - Controleer of de `GenderComboBox` een waarde heeft geselecteerd.
     - Zorg dat deze waarde correct wordt toegewezen aan de `Gender`-eigenschap van het `Patient`-object.

  2. **Valideer Invoer Prior aan Opslag:**
     - Voeg een validatiestap toe voordat het object wordt aangemaakt:

     ```csharp
     string selectedGender = (GenderComboBox.SelectedItem as ComboBoxItem)?.Content?.ToString();

     if (string.IsNullOrWhiteSpace(selectedGender))
     {
         throw new ArgumentException("Geslacht is vereist.");
     }
     ```

  3. **Controleer Eigenschap Toewijzing:**
     - Zorg ervoor dat de eigenschap `Gender` wordt toegewezen wanneer je het `Patient`-object maakt:

     ```csharp
     var patient = new Patient
     {
         FirstName = firstName,
         LastName = lastName,
         BirthDate = birthDate.Value,
         Address = address,
         PhoneNumber = phoneNumber,
         Email = email,
         Gender = selectedGender // Zorg dat dit correct wordt toegewezen
     };
     ```

  4. **Database Configuratie:**
     - Controleer of `Gender` een vereiste kolom is in je databaseconfiguratie.
     - Zorg ervoor dat de entiteit correct is ingesteld in het datamodel voor entiteitframework of vergelijkbare ORM.

  Als deze stappen correct worden gevolgd, moet de foutmelding verholpen zijn.

usage:
  {"prompt_tokens":218,"completion_tokens":362,"cache_write_input_tokens":0,"cache_read_input_tokens":6784,"reasoning_tokens":0}


id: 019d7749-17c8-7180-b2b5-340e926cc104
conversation_id: 019d7737-3fb2-7009-b80e-66dac560e3f6
user_id: D294954
agent: App\Ai\Agents\CustomAgent
role: user
attachments: []
tool_calls: []
tool_results: []
usage: []
meta: []
created_at: 2026-04-10 14:06:12
updated_at: 2026-04-10 14:06:12
content:
  kan je deze fixen??  private void ReportButton_Click(object sender, RoutedEventArgs e)
   {
       Frame.Navigate(typeof(VerslagOverzicht));
   } 

  dit staat in een andere pagina


id: 019d7749-17d2-707a-993a-d07159f895bb
conversation_id: 019d7737-3fb2-7009-b80e-66dac560e3f6
user_id: D294954
agent: App\Ai\Agents\CustomAgent
role: assistant
attachments: []
tool_calls: []
tool_results: []
meta: {"provider":"openai","model":"gpt-4o","citations":[]}
created_at: 2026-04-10 14:06:12
updated_at: 2026-04-10 14:06:12
content:
  Om een navigatie tussen pagina's in een WPF-applicatie te implementeren, moet je er zeker van zijn dat je een `Frame` gebruikt binnen een `Window` die meerdere pagina's kan weergeven. Hiermee wordt het `Frame.Navigate`-mechanisme gebruikt.

  ### Voorbeeld:

  Hier is hoe je de navigatie kunt instellen binnen je hoofdvenster (`MainWindow.xaml`):

  #### MainWindow.xaml

  ```xml
  <Window x:Class="CareTracker.MainWindow"
          xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
          xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
          Title="CareTracker" Height="600" Width="800">
      <Grid>
          <Frame x:Name="MainFrame" NavigationUIVisibility="Hidden"/>
      </Grid>
  </Window>
  ```

  ### Code-Behind voor navigatie

  In je `MainWindow.xaml.cs` zorg je ervoor dat het `Frame` geladen is en dat je de pagina kunt navigeren:

  #### MainWindow.xaml.cs

  ```csharp
  using System.Windows;
  using System.Windows.Navigation;

  namespace CareTracker
  {
      public partial class MainWindow : Window
      {
          public MainWindow()
          {
              InitializeComponent();
              MainFrame.Navigate(new Pages.Verslag.VerslagOverzicht());
          }
      }
  }
  ```

  ### Navigatie vanuit een andere pagina

  Stel dat je vanuit een andere pagina wilt navigeren naar `VerslagOverzicht`, je moet toegang hebben tot het `Frame` in het hoofdvenster. Je kunt een publieke methode of property in `MainWindow` instellen om dat te doen.

  #### Andere pagina - Navigatieknop

  ```csharp
  using System.Windows;
  using System.Windows.Controls;

  namespace CareTracker.Pages.AnderePagina
  {
      public partial class AnderePagina : Page
      {
          public AnderePagina()
          {
              InitializeComponent();
          }

          private void ReportButton_Click(object sender, RoutedEventArgs e)
          {
              if (Window.GetWindow(this) is MainWindow mainWindow)
              {
                  mainWindow.MainFrame.Navigate(new Verslag.VerslagOverzicht());
              }
          }
      }
  }
  ```

  ### Belangrijke Aandachtspunten

  1. **Frame Control**: Zorg ervoor dat het `Frame` correct is opgezet in je `MainWindow`.
  2. **Namespaces**: Controleer of de namespaces correct zijn.
  3. **Pagina Navigatie**: Gebruik `Page`-objecten voor navigatie binnen het `Frame`.

  Met deze instellingen kun je navigeren tussen verschillende pagina's in je applicatie. Laat het me weten als je verdere hulp nodig hebt!

usage:
  {"prompt_tokens":6706,"completion_tokens":553,"cache_write_input_tokens":0,"cache_read_input_tokens":8192,"reasoning_tokens":0}


id: 019d7749-49e3-736d-ba88-e74fb1d1e3be
conversation_id: 019d7743-d5ef-7094-a7aa-4752607b1507
user_id: i302789
agent: App\Ai\Agents\CustomAgent
role: user
attachments: []
tool_calls: []
tool_results: []
usage: []
meta: []
created_at: 2026-04-10 14:06:24
updated_at: 2026-04-10 14:06:24
content:
  Internal Server Error
  Livewire\Exceptions\ComponentNotFoundException
  vendor\livewire\livewire\src\Factory\Factory.php:76

  Unable to find component: [blog-carousel]
  LARAVEL 12.55.1
  PHP 8.4.19
  UNHANDLED
  CODE 0
  500
  GET
  http://pvb-2025-2026-florism-colint-larsz-rensw.test
  Exception trace
  5 vendor frames

  Livewire\LivewireManager->mount(string, array, string, array)

  resources\views\homepage.blade.php:4

  1<div>
  2    <h1>Image Carousel</h1>
  3
  4    @livewire('blog-carousel')
  5
  6    @livewireScripts
  7</div>
  8

  66 vendor frames

  Illuminate\Foundation\Application->handleRequest(object(Illuminate\Http\Request))

  public\index.php:20
  1 vendor frame
  Queries
  1-1 of 1
  sqlite

  select * from "sessions" where "id" = 'zwEfoE25GiAC5707j82MDnc0NHeg3htylr4AJevj' limit 1

  2.9ms
  Headers
  priority
  u=0, i
  upgrade-insecure-requests
  1
  cookie
  XSRF-TOKEN=eyJpdiI6InViVnh4bFBEeTlEVmpEdXpjMzNqZkE9PSIsInZhbHVlIjoic1dFN3VjQ2U0U1ZPWDJmcmUxYUtZNU84dVJ0Mmlvdm4wRE9XdExaSmVoWmxydnNhR2V6T3oya3EwUjk2TVB6WHBmNC9Fa1BzQzNKd1Z4THBBdExDbTFjMkFLcTZCcEZjellFUE5jNnFTai9qQ0QzSklLNzdsY2dmN0NObHZuaGoiLCJtYWMiOiJjYTNlNmFmMjRhN2M0Yzc2MzlhNzY5OTE0YTY5ZTg0YzZmMGVjOWM2NDQ2ZDUzZjU1NWMyYjcwYTE3NTI2ZjZhIiwidGFnIjoiIn0%3D; laravel-session=eyJpdiI6IlpzdnVicXlEeXF6bzg0S3VkL0htM1E9PSIsInZhbHVlIjoiUDdKVmNVZ3Q5Y1U0TjVBOWoreUdVZEJQNUlyVHpKQ2VQdG1RbGRjc3JzTjA0NDJPRmZwRXF6Q1h4MjlFeUhZSGk4K2RQTFhIemJTRnplZTdEY1NmSW5wa3h0dXdvMGJSbmxiSGJjbW1FNGtJaFpBWjVzYWcrenZjK2s2UVlJZ0UiLCJtYWMiOiI3MWY4YjFjMmM2MWRlNGVmM2Q0YWM4YjVhODMyMTNjYWE1MzRkNzRiMWYzNDgzMzA3OTA4NjhiMjgzNDYxODNmIiwidGFnIjoiIn0%3D
  connection
  keep-alive
  accept-encoding
  gzip, deflate
  accept-language
  en-US,en;q=0.9
  accept
  text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8
  user-agent
  Mozilla/5.0 (Windows NT 10.0; Win64; x64; rv:149.0) Gecko/20100101 Firefox/149.0
  host
  pvb-2025-2026-florism-colint-larsz-rensw.test
  Body
  // No request body
  Routing
  controller
  \Illuminate\Routing\ViewController
  route name
  home
  middleware
  web
  Routing parameters

  {
      "view": "homepage",
      "data": [],
      "status": 200,
      "headers": []
  }


id: 019d7749-49ef-737c-8e19-a1492c9fecab
conversation_id: 019d7743-d5ef-7094-a7aa-4752607b1507
user_id: i302789
agent: App\Ai\Agents\CustomAgent
role: assistant
attachments: []
tool_calls: []
tool_results: []
meta: {"provider":"openai","model":"gpt-4o","citations":[]}
created_at: 2026-04-10 14:06:25
updated_at: 2026-04-10 14:06:25
content:
  The error indicates that Livewire cannot find the component `blog-carousel`. Here are some steps to resolve this issue:

  ### 1. Check Component Name

  Ensure you are using the correct component name. If you created the component with the command:

  ```bash
  php artisan make:livewire Carousel
  ```

  Then the correct name should be `carousel` (not `blog-carousel`).

  Update your Blade file to:

  ```blade
  @livewire('carousel')
  ```

  ### 2. Component Directory and Namespace

  Verify that the component class is located in the correct directory and namespace. The `Carousel` component class should be in:

  ```plaintext
  app/Http/Livewire/Carousel.php
  ```

  With the namespace:

  ```php
  namespace App\Http\Livewire;
  ```

  ### 3. Check for Typos

  Ensure there are no typos in your component names or paths.

  ### 4. Clear Cache

  If you've made changes, clear any cached views or compiled classes:

  ```bash
  php artisan view:clear
  php artisan cache:clear
  php artisan config:clear
  php artisan route:clear
  ```

  ### 5. Check Autoload and Composer

  Ensure Composer's autoloader is up-to-date:

  ```bash
  composer dump-autoload
  ```

  ### 6. Review Blade File

  Make sure you have included the Livewire scripts and styles correctly:

  ```blade
  <!DOCTYPE html>
  <html>
  <head>
      <title>Carousel</title>
      @livewireStyles
  </head>
  <body>
      <h1>Image Carousel</h1>
      
      @livewire('carousel')

      @livewireScripts
  </body>
  </html>
  ```

  ### 7. Check Laravel Version

  Ensure your Laravel version is compatible with the Livewire version you are using.

  If you've checked all these things and the issue persists, let me know, or provide more details, and I'll assist you further!

usage:
  {"prompt_tokens":1621,"completion_tokens":395,"cache_write_input_tokens":0,"cache_read_input_tokens":0,"reasoning_tokens":0}


id: 019d774a-11cb-71b9-a7c3-a52be05b5201
conversation_id: 019d7743-d5ef-7094-a7aa-4752607b1507
user_id: i302789
agent: App\Ai\Agents\CustomAgent
role: user
attachments: []
tool_calls: []
tool_results: []
usage: []
meta: []
created_at: 2026-04-10 14:07:16
updated_at: 2026-04-10 14:07:16
content:
  the class shouldnt be there. Livewire now has backend and frontend in one file and that file is located at resources/views/components


id: 019d774a-11d6-7024-99f9-37a1aa83ad03
conversation_id: 019d7743-d5ef-7094-a7aa-4752607b1507
user_id: i302789
agent: App\Ai\Agents\CustomAgent
role: assistant
attachments: []
tool_calls: []
tool_results: []
meta: {"provider":"openai","model":"gpt-4o","citations":[]}
created_at: 2026-04-10 14:07:16
updated_at: 2026-04-10 14:07:16
content:
  If you're using the new version of Livewire where the frontend and backend logic are combined into a single file, here's how you can resolve the issue:

  ### Step 1: Create a Component

  Ensure you create the component with the specific command that supports this structure:

  ```bash
  php artisan make:livewire:component Carousel
  ```

  ### Step 2: Verify the Component

  The component should now be located in the `resources/views/components` directory. It should look something like this:

  ```php
  @props(['images'])

  <div style="display: flex; align-items: center; justify-content: center;">
      <button wire:click="previous">Previous</button>

      <div style="margin: 0 20px;">
          <img src="{{ asset('images/' . $images[$currentIndex]) }}" alt="Carousel Image" style="width: 300px; height: 200px;">
      </div>

      <button wire:click="next">Next</button>
  </div>

  <script>
      Livewire.component('carousel', {
          data() {
              return {
                  currentIndex: 0,
                  images: @json($images)
              };
          },
          next() {
              this.currentIndex = (this.currentIndex + 1) % this.images.length;
          },
          previous() {
              this.currentIndex = (this.currentIndex - 1 + this.images.length) % this.images.length;
          }
      });
  </script>
  ```

  ### Step 3: Include the Component

  Update your Blade file to reference your component correctly:

  ```blade
  <!DOCTYPE html>
  <html>
  <head>
      <title>Carousel</title>
      @livewireStyles
  </head>
  <body>
      <h1>Image Carousel</h1>

      @livewire('carousel', ['images' => ['image1.jpg', 'image2.jpg', 'image3.jpg']])

      @livewireScripts
  </body>
  </html>
  ```

  ### Step 4: Clear Cache and Serve

  Make sure you clear the cache and serve your application:

  ```bash
  php artisan view:clear
  php artisan cache:clear
  php artisan serve
  ```

  This setup should display your carousel using the combined component format. If you have further issues, provide more context or error specifics for further assistance!

usage:
  {"prompt_tokens":2049,"completion_tokens":473,"cache_write_input_tokens":0,"cache_read_input_tokens":0,"reasoning_tokens":0}


id: 019d774a-8354-726f-8208-e4f68f58f145
conversation_id: 019d7743-d5ef-7094-a7aa-4752607b1507
user_id: i302789
agent: App\Ai\Agents\CustomAgent
role: assistant
attachments: []
tool_calls: []
tool_results: []
meta: {"provider":"openai","model":"gpt-4o","citations":[]}
created_at: 2026-04-10 14:07:45
updated_at: 2026-04-10 14:07:45
content:
  Got it! If you're using Livewire's single-file component structure, here's how you can set it up:

  ### Step 1: Create the Component

  Run:

  ```bash
  php artisan make:livewire Carousel
  ```

  ### Step 2: Edit the Component

  Open the `resources/views/livewire/carousel.blade.php` file and add your logic directly inside it:

  ```blade
  <div style="display: flex; align-items: center; justify-content: center;">
      <button wire:click="previous">Previous</button>

      <div style="margin: 0 20px;">
          <img src="{{ asset('images/' . $images[$currentIndex]) }}" alt="Carousel Image" style="width: 300px; height: 200px;">
      </div>

      <button wire:click="next">Next</button>
  </div>

  <script>
      document.addEventListener('livewire:load', function () {
          Livewire.component('carousel', {
              data() {
                  return {
                      currentIndex: 0,
                      images: @json(['image1.jpg', 'image2.jpg', 'image3.jpg'])
                  };
              },
              next() {
                  this.currentIndex = (this.currentIndex + 1) % this.images.length;
              },
              previous() {
                  this.currentIndex = (this.currentIndex - 1 + this.images.length) % this.images.length;
              }
          });
      });
  </script>
  ```

  ### Step 3: Include the Component in a Blade File

  In a Blade view, include this component:

  ```blade
  <!DOCTYPE html>
  <html>
  <head>
      <title>Carousel</title>
      @livewireStyles
  </head>
  <body>
      <h1>Image Carousel</h1>

      @livewire('carousel')

      @livewireScripts
  </body>
  </html>
  ```

  ### Step 4: Final Checks

  - Ensure images are in the correct `public/images` directory.
  - Clear caches:

  ```bash
  php artisan view:clear
  php artisan cache:clear
  ```

  - Serve your application:

  ```bash
  php artisan serve
  ```

  This should implement the combined component correctly. Let me know if there are any issues!

usage:
  {"prompt_tokens":2534,"completion_tokens":460,"cache_write_input_tokens":0,"cache_read_input_tokens":0,"reasoning_tokens":0}


id: 019d774a-847a-705e-8309-360d80753e46
conversation_id: 019d7737-3fb2-7009-b80e-66dac560e3f6
user_id: D294954
agent: App\Ai\Agents\CustomAgent
role: user
attachments: []
tool_calls: []
tool_results: []
usage: []
meta: []
created_at: 2026-04-10 14:07:45
updated_at: 2026-04-10 14:07:45
content:
  ik wil deze code zo houden alleen ik wil dat die naar de report pagina ga als ik er op druk using CareTracker.Data;
  using CareTracker.Pages.Login;
  using CareTracker.Pages.Patient;
  using Microsoft.UI.Xaml;
  using Microsoft.UI.Xaml.Controls;
  using Microsoft.UI.Xaml.Controls.Primitives;
  using Microsoft.UI.Xaml.Data;
  using Microsoft.UI.Xaml.Input;
  using Microsoft.UI.Xaml.Media;
  using Microsoft.UI.Xaml.Navigation;
  using System;
  using System.Collections.Generic;
  using System.IO;
  using System.Linq;
  using System.Runtime.InteropServices.WindowsRuntime;
  using Windows.Foundation;
  using Windows.Foundation.Collections;


  namespace CareTracker.Pages.Doctor
  {

      public sealed partial class DoctorPage : Page
      {
          private List<CareTracker.Data.Patient> allPatients = new List<CareTracker.Data.Patient>();
          public DoctorPage()
          {
              InitializeComponent();
              LoadPatients(); 

          }
          private void LoadPatients()
          {
              using (var dbContext = new AppDbContext())
              {
                  allPatients = dbContext.Patients.ToList();
              }

              PatientListView.ItemsSource = allPatients;
          }
          private void SearchBox_TextChanged(object sender, TextChangedEventArgs e)
          {
              var query = ((TextBox)sender).Text.ToLower();

              var filtered = allPatients
                  .Where(p => p.FirstName.ToLower().Contains(query) ||
                              p.LastName.ToLower().Contains(query))
                  .ToList();

              PatientListView.ItemsSource = filtered;
          }

          private void AppointmentsButton_Click(object sender, RoutedEventArgs e)
          {
          }

          private void PatientButton_Click(object sender, RoutedEventArgs e)
          {
              Frame.Navigate(typeof(PatientPage));

          }

          private void ReportButton_Click(object sender, RoutedEventArgs e)
          {
              Frame.Navigate(typeof(VerslagOverzicht));
          }

          private void LogoutButton_Click(object sender, RoutedEventArgs e)
          {
              LoggedInUser.CurrentUser = null;

              Frame.Navigate(typeof(LoginPage));
          }

      }
  }


id: 019d774a-8482-7216-8f26-31fc3ddf5a96
conversation_id: 019d7737-3fb2-7009-b80e-66dac560e3f6
user_id: D294954
agent: App\Ai\Agents\CustomAgent
role: assistant
attachments: []
tool_calls: []
tool_results: []
meta: {"provider":"openai","model":"gpt-4o","citations":[]}
created_at: 2026-04-10 14:07:45
updated_at: 2026-04-10 14:07:45
content:
  Zeker! Hieronder is de aangepaste code om te navigeren naar de `VerslagOverzicht`-pagina vanuit de `DoctorPage` met behoud van je huidige structuur. Aangezien je de `Microsoft.UI.Xaml` gebruikt, neem ik aan dat je een WinUI 3 project hebt.

  ### DoctorPage.xaml.cs

  Je code lijkt al in orde voor navigatie. Zorg ervoor dat de verstrekte `Type` werkelijk verwijst naar de juiste pagina binnen je project. Controleer de volgende punten:

  1. Controleren of `VerslagOverzicht` correct in je project is gedefinieerd als een pagina.
  2. Het juiste namespacepad wordt gebruikt.

  ### Probleemoplossing

  Als `VerslagOverzicht` niet goed navigeert, controleer dan:

  #### De Namespace en Classcontrole

  Controleer of `VerslagOverzicht` correct is geïmporteerd en dat het daadwerkelijk een gedeeltelijke class is binnen je project.

  ```csharp
  using CareTracker.Pages.Verslag; // Controleer dat dit overeenkomt met de locatie van je VerslagOverzicht pagina
  ```

  #### Zorg dat `VerslagOverzicht` bestaat als WinUI Page

  Als de `VerslagOverzicht` daadwerkelijk ontbreekt of verkeerd is ingesteld:

  #### Voorbeeld VerslagOverzicht.xaml

  ```xml
  <Page
      x:Class="CareTracker.Pages.Verslag.VerslagOverzicht"
      xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
      xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
      xmlns:local="using:CareTracker.Pages.Verslag"
      xmlns:d="http://schemas.microsoft.com/expression/blend/2008"
      xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006"
      mc:Ignorable="d">

      <!-- Voeg hier je XAML-inhoud toe -->

  </Page>
  ```

  #### VerslagOverzicht.xaml.cs

  Controleer dat het bestand correct is ingesteld als `Page`.

  ```csharp
  namespace CareTracker.Pages.Verslag
  {
      public sealed partial class VerslagOverzicht : Page
      {
          public VerslagOverzicht()
          {
              InitializeComponent();
          }

          // Voeg je overige logica hier toe
      }
  }
  ```

  Zorg ervoor dat alle namespaces juist zijn en dat de bestanden correct in het project zitten. Als je nog steeds problemen ondervindt, deel dan de specifieke foutmelding.

usage:
  {"prompt_tokens":15867,"completion_tokens":513,"cache_write_input_tokens":0,"cache_read_input_tokens":0,"reasoning_tokens":0}


id: 019d774a-88ab-70b7-b5e4-9a8246322b02
conversation_id: 019d774a-88a2-737b-9e94-ed68def26a60
user_id: i302573
agent: App\Ai\Agents\CustomAgent
role: user
attachments: []
tool_calls: []
tool_results: []
usage: []
meta: []
created_at: 2026-04-10 14:07:46
updated_at: 2026-04-10 14:07:46
content:
  Filament\FilamentManager::getUserName(): Return value must be of type string, null returned

  How can i fix this


id: 019d774a-88b2-7352-a103-66e124c63c62
conversation_id: 019d774a-88a2-737b-9e94-ed68def26a60
user_id: i302573
agent: App\Ai\Agents\CustomAgent
role: assistant
attachments: []
tool_calls: []
tool_results: []
meta: {"provider":"openai","model":"gpt-5-mini","citations":[]}
created_at: 2026-04-10 14:07:46
updated_at: 2026-04-10 14:07:46
content:
  Die fout betekent dat FilamentManager::getUserName() een string moet teruggeven maar in jouw situatie null teruggeeft. Dat gebeurt als er geen (geldige) naam beschikbaar is (bijv. auth()->user() is null of user->name is null). Oplossingen zijn: zorgen dat er altijd een string terugkomt, of Filament updaten als het een bug in de package is. Hieronder staan concrete opties en voorbeeldcode.

  Snelle checks
  - Bekijk de stacktrace: welk bestand en welke regel veroorzaken de error? Vaak wijst dat naar vendor/filament/.../FilamentManager.php.
  - Controleer of er een ingelogde gebruiker is en of die gebruiker een naam heeft (db-kolom name niet null).

  Aanpak 1 — simpel en aanbevolen: vul ontbrekende namen in de database
  Als sommige gebruikers geen name hebben, zet die dan op e-mail of een standaardwaarde:

  Via tinker:
  php artisan tinker
  >>> \App\Models\User::whereNull('name')->get()->each(fn($u) => $u->update(['name' => $u->email]));

  Of via een migratie / SQL.

  Aanpak 2 — fallback in je User-model (veiliger, makkelijk)
  Voeg een accessor toe zodat $user->name altijd een string teruggeeft:

  // In app/Models/User.php
  public function getNameAttribute($value): string
  {
      return $value ?? $this->email ?? 'Gebruiker';
  }

  Zo krijgt Filament altijd een string terug (name of e-mail of 'Gebruiker').

  Aanpak 3 — fallback óf patch in FilamentManager (niet ideaal om vendor direct te wijzigen)
  Je kunt de FilamentManager laten vallen terugvallen op e-mail of lege string. Als tijdelijke quickfix (niet aanrader op lange termijn) kun je in vendor het volgende aanpassen:

  public function getUserName(): string
  {
      $user = $this->auth->user();
      return $user?->name ?? $user?->email ?? '';
  }

  Maar wijzigingen in vendor gaan verloren bij composer update. Beter is een override via service container of via een PR/upgrade van Filament.

  Aanpak 4 — upgrade Filament
  Kijk of er een nieuwere Filament-versie is waarin dit probleem is opgelost en voer composer update uit:
  composer update filament/filament

  Samenvatting / aanbevolen volgorde
  1. Controleer waarom name null is (auth, data, migratie).  
  2. Vul ontbrekende namen in de DB (snelle fix).  
  3. Voeg een accessor toe in User-model om een veilige fallback te bieden.  
  4. Als het echt een bug in Filament is, update de package of maak een nette override / PR.

  Als je wilt, kan ik even helpen met:
  - de exacte regel uit je stacktrace in te kijken,
  - een concrete accessor of migratie schrijven op basis van jouw User-model,
  - of een veilige service-container override te maken als je dat wilt. Geef dan de relevante code of stacktrace.

usage:
  {"prompt_tokens":51,"completion_tokens":1897,"cache_write_input_tokens":0,"cache_read_input_tokens":0,"reasoning_tokens":1216}


id: 019d774a-9760-732a-8968-6e71089b02c0
conversation_id: 019d7743-d5ef-7094-a7aa-4752607b1507
user_id: i302789
agent: App\Ai\Agents\CustomAgent
role: user
attachments: []
tool_calls: []
tool_results: []
usage: []
meta: []
created_at: 2026-04-10 14:07:50
updated_at: 2026-04-10 14:07:50
content:
  <?php

  namespace App\Http\Livewire;

  use Livewire\Component;
  use App\Models\Blog;
  use Illuminate\Support\Str;
  use Illuminate\Support\Facades\Storage;

  class BlogCarousel extends Component
  {
      public $currentIndex = 0;
      public $images = [
          'image1.jpg',
          'image2.jpg',
          'image3.jpg',
      ];

      public function next()
      {
          $this->currentIndex = ($this->currentIndex + 1) % count($this->images);
      }

      public function previous()
      {
          $this->currentIndex = ($this->currentIndex - 1 + count($this->images)) % count($this->images);
      }

      public function render()
      {
          return view('livewire.carousel');
      }
  }

  ?>

  <div style="display: flex; align-items: center; justify-content: center;">
      <button wire:click="previous">Previous</button>

      <div style="margin: 0 20px;">
          <img src="{{ asset('images/' . $images[$currentIndex]) }}" alt="Carousel Image" style="width: 300px; height: 200px;">
      </div>

      <button wire:click="next">Next</button>
  </div>


id: 019d774a-976a-72e0-8f83-26a58cbb20cd
conversation_id: 019d7743-d5ef-7094-a7aa-4752607b1507
user_id: i302789
agent: App\Ai\Agents\CustomAgent
role: assistant
attachments: []
tool_calls: []
tool_results: []
meta: {"provider":"openai","model":"gpt-4o","citations":[]}
created_at: 2026-04-10 14:07:50
updated_at: 2026-04-10 14:07:50
content:
  Thanks for sharing your component code! It looks like everything is structured correctly. Let's go over a few key points to ensure everything is set up properly:

  ### 1. Component Registration

  Ensure your component is properly registered. Since you named it `BlogCarousel`, reference it in your Blade view as:

  ```blade
  @livewire('blog-carousel')
  ```

  ### 2. Component File Structure

  Your `BlogCarousel` component should have:

  - **Class Location:** `app/Http/Livewire/BlogCarousel.php`
  - **View Location:** `resources/views/livewire/blog-carousel.blade.php`

  ### 3. Double-Check Paths

  Make sure:
  - The class namespace and paths match your directory structure.
  - The Blade view file corresponds to the return statement in `render()`:

  ```php
  return view('livewire.blog-carousel');
  ```

  ### 4. Blade and Livewire Scripts

  Ensure your main Blade layout includes Livewire styles and scripts:

  ```blade
  <!DOCTYPE html>
  <html>
  <head>
      <title>Carousel</title>
      @livewireStyles
  </head>
  <body>
      <h1>Image Carousel</h1>

      @livewire('blog-carousel')

      @livewireScripts
  </body>
  </html>
  ```

  ### 5. Clear Cache

  Run these commands to clear any cached files that could be causing issues:

  ```bash
  php artisan view:clear
  php artisan cache:clear
  composer dump-autoload
  ```

  ### 6. Test Image Paths

  Make sure the images `image1.jpg`, `image2.jpg`, etc., are in the `public/images` directory.

  ### Final Check

  If you have verified all these steps and it still doesn't work, double-check the spelling and ensure there are no typos in file names or paths.

  Try these suggestions, and let me know if you encounter further issues!

usage:
  {"prompt_tokens":3265,"completion_tokens":383,"cache_write_input_tokens":0,"cache_read_input_tokens":0,"reasoning_tokens":0}


id: 019d774b-5b0a-73a3-8ae9-6a7c86dce1e2
conversation_id: 019d7743-d5ef-7094-a7aa-4752607b1507
user_id: i302789
agent: App\Ai\Agents\CustomAgent
role: assistant
attachments: []
tool_calls: []
tool_results: []
meta: {"provider":"openai","model":"gpt-4o","citations":[]}
created_at: 2026-04-10 14:08:40
updated_at: 2026-04-10 14:08:40
content:
  Ah, I see. If you're using the new single-file component format in Livewire, here's how you can organize it:

  ### Single File Component Example

  Your component should reside entirely within a Blade file inside `resources/views/livewire`.

  ### Step 1: Create the Component

  Create a single file for your component at `resources/views/livewire/blog-carousel.blade.php` with both the PHP and Blade sections combined:

  ```php
  <div>
      @php
      $currentIndex = 0;
      $images = [
          'image1.jpg',
          'image2.jpg',
          'image3.jpg',
      ];
      @endphp

      <div style="display: flex; align-items: center; justify-content: center;">
          <button wire:click="$set('currentIndex', ($currentIndex - 1 + count($images)) % count($images))">Previous</button>

          <div style="margin: 0 20px;">
              <img src="{{ asset('images/' . $images[$currentIndex]) }}" alt="Carousel Image" style="width: 300px; height: 200px;">
          </div>

          <button wire:click="$set('currentIndex', ($currentIndex + 1) % count($images))">Next</button>
      </div>
  </div>
  ```

  ### Step 2: Use the Component

  In your main Blade layout or page, include this component:

  ```blade
  <!DOCTYPE html>
  <html>
  <head>
      <title>Carousel</title>
      @livewireStyles
  </head>
  <body>
      <h1>Image Carousel</h1>

      @livewire('blog-carousel')

      @livewireScripts
  </body>
  </html>
  ```

  ### Notes

  - **Dynamic Properties:** Utilize Livewire's `$set` method to manage the `currentIndex` dynamically.
  - **Component Inclusion:** Ensure you use `@livewire('blog-carousel')` to properly reference your component.

  ### Final Steps

  - **Image Availability:** Ensure the images are in `public/images`.
  - **Cache Management:** Clear cached views if needed using:

    ```bash
    php artisan view:clear
    php artisan cache:clear
    ```

  The above setup should represent a basic single-file Livewire component. Let me know if there are further questions!

usage:
  {"prompt_tokens":851,"completion_tokens":479,"cache_write_input_tokens":0,"cache_read_input_tokens":2816,"reasoning_tokens":0}


id: 019d774b-b74c-7088-be7a-535cefa3c5fc
conversation_id: 019d7743-d5ef-7094-a7aa-4752607b1507
user_id: i302789
agent: App\Ai\Agents\CustomAgent
role: assistant
attachments: []
tool_calls: []
tool_results: []
meta: {"provider":"openai","model":"gpt-4o","citations":[]}
created_at: 2026-04-10 14:09:04
updated_at: 2026-04-10 14:09:04
content:
  I apologize for any confusion. Let's clarify the single-file component approach with the correct structure.

  ### Single File Livewire Component

  1. **File Location:**  
     Place your component file within `resources/views/livewire/blog-carousel.blade.php`.

  2. **File Content:**  
     Combine PHP logic and Blade template within this single file:

  ```blade
  @php
  namespace App\Http\Livewire;

  use Livewire\Component;

  class BlogCarousel extends Component
  {
      public $currentIndex = 0;
      public $images = [
          'image1.jpg',
          'image2.jpg',
          'image3.jpg',
      ];

      public function next()
      {
          $this->currentIndex = ($this->currentIndex + 1) % count($this->images);
      }

      public function previous()
      {
          $this->currentIndex = ($this->currentIndex - 1 + count($this->images)) % count($this->images);
      }

      public function render()
      {
          return <<<'blade'
              <div style="display: flex; align-items: center; justify-content: center;">
                  <button wire:click="previous">Previous</button>
                  
                  <div style="margin: 0 20px;">
                      <img src="{{ asset('images/' . $images[$currentIndex]) }}" alt="Carousel Image" style="width: 300px; height: 200px;">
                  </div>
                  
                  <button wire:click="next">Next</button>
              </div>
          blade;
      }
  }
  @endphp
  ```

  3. **Include in Blade View:**

  In your Blade file (e.g., `resources/views/homepage.blade.php`):

  ```blade
  <!DOCTYPE html>
  <html>
  <head>
      <title>Carousel</title>
      @livewireStyles
  </head>
  <body>
      <h1>Image Carousel</h1>

      @livewire('blog-carousel')

      @livewireScripts
  </body>
  </html>
  ```

  ### Additional Steps

  - **Image Directory:** Ensure the images are located in `public/images`.
  - **Clear Cache:** If necessary, clear caches to ensure changes are applied:

    ```bash
    php artisan view:clear
    php artisan cache:clear
    ```

  This setup uses PHP heredoc syntax for the Blade content, enabling the integration of both Livewire logic and Blade template in a single file. If you have any more specific requirements, please let me know!

usage:
  {"prompt_tokens":703,"completion_tokens":514,"cache_write_input_tokens":0,"cache_read_input_tokens":3456,"reasoning_tokens":0}


id: 019d774b-f327-720c-9b1c-0294c3ee18c5
conversation_id: 019d7743-d5ef-7094-a7aa-4752607b1507
user_id: i302789
agent: App\Ai\Agents\CustomAgent
role: user
attachments: []
tool_calls: []
tool_results: []
usage: []
meta: []
created_at: 2026-04-10 14:09:19
updated_at: 2026-04-10 14:09:19
content:
  again... its like this":

  <?php

  namespace App\Http\Livewire;

  use Livewire\Component;
  use App\Models\Blog;
  use Illuminate\Support\Str;
  use Illuminate\Support\Facades\Storage;

  class BlogCarousel extends Component
  {
      public $currentIndex = 0;
      public $images = [
          'image1.jpg',
          'image2.jpg',
          'image3.jpg',
      ];

      public function next()
      {
          $this->currentIndex = ($this->currentIndex + 1) % count($this->images);
      }

      public function previous()
      {
          $this->currentIndex = ($this->currentIndex - 1 + count($this->images)) % count($this->images);
      }

      public function render()
      {
          return view('livewire.carousel');
      }
  }

  ?>

  <div style="display: flex; align-items: center; justify-content: center;">
      <button wire:click="previous">Previous</button>

      <div style="margin: 0 20px;">
          <img src="{{ asset('images/' . $images[$currentIndex]) }}" alt="Carousel Image" style="width: 300px; height: 200px;">
      </div>

      <button wire:click="next">Next</button>
  </div>


id: 019d774b-f340-70f2-9fb4-382938b81025
conversation_id: 019d7743-d5ef-7094-a7aa-4752607b1507
user_id: i302789
agent: App\Ai\Agents\CustomAgent
role: assistant
attachments: []
tool_calls: []
tool_results: []
meta: {"provider":"openai","model":"gpt-4o","citations":[]}
created_at: 2026-04-10 14:09:19
updated_at: 2026-04-10 14:09:19
content:
  I understand now. You're using the newer Livewire version that allows PHP logic in Blade directly. Here's the correct setup for a single-file component:

  ### Single File Component Setup

  1. **Component Directory:**  
     Ensure your component file is within `app/Http/Livewire`.

  2. **Component Class:**  
     Create or update the component class `BlogCarousel.php`:

  ```php
  <?php

  namespace App\Http\Livewire;

  use Livewire\Component;

  class BlogCarousel extends Component
  {
      public $currentIndex = 0;
      public $images = [
          'image1.jpg',
          'image2.jpg',
          'image3.jpg',
      ];

      public function next()
      {
          $this->currentIndex = ($this->currentIndex + 1) % count($this->images);
      }

      public function previous()
      {
          $this->currentIndex = ($this->currentIndex - 1 + count($this->images)) % count($this->images);
      }

      public function render()
      {
          return view('livewire.blog-carousel');
      }
  }
  ?>
  ```

  3. **Blade Template:**  
     Inside `resources/views/livewire/blog-carousel.blade.php`:

  ```php
  <div style="display: flex; align-items: center; justify-content: center;">
      <button wire:click="previous">Previous</button>

      <div style="margin: 0 20px;">
          <img src="{{ asset('images/' . $images[$currentIndex]) }}" alt="Carousel Image" style="width: 300px; height: 200px;">
      </div>

      <button wire:click="next">Next</button>
  </div>
  ```

  4. **Blade View to Use the Component:**

  In your main Blade file:

  ```blade
  <!DOCTYPE html>
  <html>
  <head>
      <title>Carousel</title>
      @livewireStyles
  </head>
  <body>
      <h1>Image Carousel</h1>

      @livewire('blog-carousel')

      @livewireScripts
  </body>
  </html>
  ```

  ### Final Steps

  - **Image Directory:** Ensure the images exist in `public/images`.
  - **Clear Cache:** Clear views if needed:

    ```bash
    php artisan view:clear
    php artisan cache:clear
    ```

  This approach clearly organizes your component logic and Blade template separately but within the Livewire environment. Let me know if this aligns with what you're trying to achieve!

usage:
  {"prompt_tokens":4950,"completion_tokens":515,"cache_write_input_tokens":0,"cache_read_input_tokens":0,"reasoning_tokens":0}


id: 019d774c-1291-7218-9f10-fdb03899231c
conversation_id: 019d774a-88a2-737b-9e94-ed68def26a60
user_id: i302573
agent: App\Ai\Agents\CustomAgent
role: user
attachments: []
tool_calls: []
tool_results: []
usage: []
meta: []
created_at: 2026-04-10 14:09:27
updated_at: 2026-04-10 14:09:27
content:
  public function getNameAttribute($value): string
  {
  return $value ?? $this->email ?? 'Gebruiker';
  }|


  make this so it gets the name please.


id: 019d774c-129d-71ce-84b0-1ac94c58bc84
conversation_id: 019d774a-88a2-737b-9e94-ed68def26a60
user_id: i302573
agent: App\Ai\Agents\CustomAgent
role: assistant
attachments: []
tool_calls: []
tool_results: []
meta: {"provider":"openai","model":"gpt-5-mini","citations":[]}
created_at: 2026-04-10 14:09:27
updated_at: 2026-04-10 14:09:27
content:
  Je wilt dat de accessor echt een bruikbare naam teruggeeft (bijv. samengestelde voor- + achternaam, anders e-mail), zodat Filament nooit null terugkrijgt. Gebruik een iets robuustere accessor die eerst de kolom `name` gebruikt, daarna kijkt naar `first_name` + `last_name`, en als dat ook niet bestaat terugvalt op `email` of een default.

  Plaats dit in je User-model (app/Models/User.php):

  public function getNameAttribute($value): string
  {
      // 1) Als de name-kolom is gevuld
      if (!empty($value)) {
          return $value;
      }

      // 2) Probeer voor- + achternaam (als je die velden gebruikt)
      $first = $this->first_name ?? '';
      $last  = $this->last_name ?? '';
      $full = trim("{$first} {$last}");
      if ($full !== '') {
          return $full;
      }

      // 3) Fallback op e-mail of username
      if (!empty($this->email)) {
          return $this->email;
      }
      if (!empty($this->username)) {
          return $this->username;
      }

      // 4) Laatste redmiddel
      return 'Gebruiker';
  }

  Tips:
  - Controleer dat je databasekolommen (`name`, `first_name`, `last_name`, `email`) daadwerkelijk bestaan en gevuld zijn waar nodig.
  - Na wijzigen van het model kun je eventuele caches legen: php artisan cache:clear && php artisan config:clear && php artisan route:clear.
  - Als je nog steeds die fout krijgt, deel de stacktrace; dan kijk ik waar exact null vandaan komt (bijv. auth()->user() is null).

usage:
  {"prompt_tokens":724,"completion_tokens":798,"cache_write_input_tokens":0,"cache_read_input_tokens":0,"reasoning_tokens":384}


id: 019d774c-3fb6-7363-902f-8140e910de2c
conversation_id: 019d773a-d685-71b2-883e-d9254c665f0a
user_id: i303186
agent: App\Ai\Agents\CustomAgent
role: user
attachments: []
tool_calls: []
tool_results: []
usage: []
meta: []
created_at: 2026-04-10 14:09:38
updated_at: 2026-04-10 14:09:38
content:
  ik moet bij deze seeder nog bepaalde classeficaties hebben in de seeder bij patient kunnen er meedere zijn : using System;
  using System.Collections.Generic;
  using System.Linq;
  using System.Text;
  using System.Threading.Tasks;

  namespace CareTracker.Data
  {
      public class Appointment
      {
          public int Id { get; set; }
          public DateTime DateTime { get; set; }
          public int PatientId { get; set; } // Foreign Key
          public Patient Patient { get; set; }
          public int DoctorId { get; set; } // Foreign Key
          public User Doctor { get; set; }
          public string Location { get; set; }
          public List<string> Classifications { get; set; } = new List<string>(); // Labels

          public Report Report { get; set; }  // 1-op-1-relatie met Report
      }
  }


              modelBuilder.Entity<Patient>().HasData(
                  new Patient
                  {
                      Id = 1,
                      FirstName = "Jan",
                      LastName = "Jansen",
                      BirthDate = new DateTime(1980, 5, 20),
                      Address = "Straat 1, Stad",
                      PhoneNumber = "0123456789",
                      Email = "jan.jansen@email.com",
                      DoctorId = 1
                  }
              );

              modelBuilder.Entity<Appointment>().HasData(
                  new Appointment
                  {
                      Id = 1,
                      DateTime = DateTime.Now.AddDays(1),
                      PatientId = 1,
                      DoctorId = 1,
                      Location = "Kamer 101",
                      Classifications = new List<string> { "Routine Check-up" }
                  }
              );

              modelBuilder.Entity<Report>().HasData(
                  new Report
                  {
                      Id = 1,
                      Date = DateTime.Now,
                      Content = "De patiënt klaagde over hoofdpijn.",
                      AuthorId = 1,
                      PatientId = 1,
                      AppointmentId = 1 // Koppel de report aan de correcte appointment
                  }
              );
          }using System;
  using System.Collections.Generic;
  using System.Linq;
  using System.Text;
  using System.Threading.Tasks;

  namespace CareTracker.Data
  {
      public class Report
      {
          public int Id { get; set; }
          public DateTime Date { get; set; }
          public string Content { get; set; }
          public int AuthorId { get; set; } // Foreign Key
          public User Author { get; set; }
          public int PatientId { get; set; } // Foreign Key
          public Patient Patient { get; set; }
          public int AppointmentId { get; set; } // Unique Foreign Key
          public Appointment Appointment { get; set; } // 1-op-1-relatie met Appointment
          public List<string> Classifications { get; set; } = new List<string>(); // Labels

      }
  }


id: 019d774c-3fc2-7108-a55d-d3f0f2a2c6f7
conversation_id: 019d773a-d685-71b2-883e-d9254c665f0a
user_id: i303186
agent: App\Ai\Agents\CustomAgent
role: assistant
attachments: []
tool_calls: []
tool_results: []
meta: {"provider":"openai","model":"gpt-4o","citations":[]}
created_at: 2026-04-10 14:09:39
updated_at: 2026-04-10 14:09:39
content:
  Om meerdere classificaties voor een `Patient` in je seeder op te nemen, zou je kunnen overwegen om een lijst of een veld toe te voegen aan de `Patient`-entiteit. Hier is een manier om het te benaderen:

  ### Patient Class
  Zorg ervoor dat de `Patient`-klasse een eigenschap heeft voor classificaties:

  ```csharp
  public class Patient
  {
      public int Id { get; set; }
      public string FirstName { get; set; }
      public string LastName { get; set; }
      public DateTime BirthDate { get; set; }
      public string Address { get; set; }
      public string PhoneNumber { get; set; }
      public string Email { get; set; }
      public int DoctorId { get; set; }  // Foreign Key
      public User Doctor { get; set; }
      
      // Voeg classificaties toe
      public List<string> Classifications { get; set; } = new List<string>();
  }
  ```

  ### Seeder
  Pas de `HasData`-methode aan om deze classificaties op te nemen:

  ```csharp
  modelBuilder.Entity<Patient>().HasData(
      new Patient
      {
          Id = 1,
          FirstName = "Jan",
          LastName = "Jansen",
          BirthDate = new DateTime(1980, 5, 20),
          Address = "Straat 1, Stad",
          PhoneNumber = "0123456789",
          Email = "jan.jansen@email.com",
          DoctorId = 1,
          Classifications = new List<string> { "Chronische zorg", "Diabetes", "Hypertensie" }  // Voeg classificaties hier toe
      }
  );
  ```

  ### Structuur
  Omdat Entity Framework Core standaard geen lijsten van primitieve types zoals `List<string>` ondersteunt, moet je overwegen om een extra entiteit toe te voegen als je wilt dat classificaties aanpasbaar zijn in de database:

  ```csharp
  public class PatientClassification
  {
      public int Id { get; set; }
      public string Classification { get; set; }
      public int PatientId { get; set; }
      public Patient Patient { get; set; }
  }
  ```

  En pas dan `HasData` aan:

  ```csharp
  modelBuilder.Entity<PatientClassification>().HasData(
      new PatientClassification { Id = 1, Classification = "Chronische zorg", PatientId = 1 },
      new PatientClassification { Id = 2, Classification = "Diabetes", PatientId = 1 },
      new PatientClassification { Id = 3, Classification = "Hypertensie", PatientId = 1 }
  );
  ```

  Zo kun je meerdere classificaties per patiënt ondersteunen in de context van een relationele database.

usage:
  {"prompt_tokens":4609,"completion_tokens":580,"cache_write_input_tokens":0,"cache_read_input_tokens":0,"reasoning_tokens":0}


id: 019d774c-615a-731a-8436-0dcc822a606c
conversation_id: 019d76c5-de9d-7121-9d30-54bde9dfe844
user_id: i305350
agent: App\Ai\Agents\CustomAgent
role: assistant
attachments: []
tool_calls: []
tool_results: []
meta: {"provider":"openai","model":"gpt-5-mini","citations":[]}
created_at: 2026-04-10 14:09:47
updated_at: 2026-04-10 14:09:47
content:
  A HyperlinkButton is a WinUI/XAML control that looks and behaves like a web-style hyperlink (inline text styled as a link) but acts like a button. Use it when you want a clickable link-like element that either navigates to a URL or runs logic in your app.

  Key points
  - Visual: by default it appears as underlined text (no background), styled like a web link.  
  - Behavior: it raises Click events like a Button; some XAML frameworks also support a NavigateUri property to open a URI.  
  - Use cases: open a website, navigate to another page, or trigger an in-app action while keeping link styling.  
  - Accessibility: works with keyboard and screen readers; set AutomationProperties.Name when needed.

  Examples for WinUI 3

  1) Hyperlink-looking button that runs custom code (recommended for full control)
  XAML:
  <HyperlinkButton Content="Request account" Click="RequestAccount_Click" Foreground="#42D7D7"/>

  Code-behind (C#) — open a web page:
  private async void RequestAccount_Click(object sender, RoutedEventArgs e)
  {
      var uri = new Uri("https://example.com/request");
      await Windows.System.Launcher.LaunchUriAsync(uri);
  }

  2) If NavigateUri is available in your WinUI version (UWP-style), you can set it directly:
  XAML:
  <HyperlinkButton Content="Visit site" NavigateUri="https://example.com" TargetName="_blank" Foreground="#42D7D7"/>

  3) Inline link inside a TextBlock (for sentences with a clickable word)
  XAML:
  <TextBlock Foreground="#B0B0B0" TextWrapping="Wrap">
      Don't have an account? <HyperlinkButton Content="Request one" Click="RequestAccount_Click" Style="{StaticResource HyperlinkButtonStyle}" />
  </TextBlock>
  (You might need to tweak styles so the HyperlinkButton blends inline—often easier to use a plain TextBlock + in-line Hyperlink in RichTextBlock for true inline flow.)

  Styling tips
  - You can change Foreground to your accent color and remove underline by overriding style if needed.  
  - For consistent spacing inside a card/footer, center with HorizontalAlignment and control Margin.  
  - For accessibility, set AutomationProperties.Name or add ToolTip if the link’s purpose isn’t obvious.

  If you want, I can:
  - give a ready-to-use style that makes HyperlinkButton match your card’s look, or  
  - show how to add a small icon next to the link text. Which would you prefer?

usage:
  {"prompt_tokens":1131,"completion_tokens":1154,"cache_write_input_tokens":0,"cache_read_input_tokens":7040,"reasoning_tokens":576}


id: 019d774d-1cc4-70bf-bb8c-bc7a7dbd1934
conversation_id: 019d7740-ba8d-7075-81e0-d58c86dce8ea
user_id: i287513
agent: App\Ai\Agents\CustomAgent
role: user
attachments: []
tool_calls: []
tool_results: []
usage: []
meta: []
created_at: 2026-04-10 14:10:35
updated_at: 2026-04-10 14:10:35
content:
  fix dele hele backend public sealed partial class AssistantPage : Page
      {
          private HashSet<DateOnly> _planningDates = new();
          List<DateTime> dayEvents = new()
          {
              DateTime.Today,
          };
          public AssistantPage()
          {
              InitializeComponent();
              RefreshPlanningCache();
              LoadTodayPlanning();
          }

          private void RefreshPlanningCache()
          {
              using var db = new AppDbContext();
              _planningDates = db.Appointments
                  .Select(p => p.DateTime.Date)
                  .Distinct()
                  .ToHashSet();
          }

          private void LoadTodayPlanning()
          {
              using var db = new AppDbContext();

              var today = DateTime.Today;
              TodayPlanningListView.ItemsSource = db.Appointments
                  .Where(p => p.DateTime >= today && p.DateTime < today.AddDays(1))
                  .ToList();
          }

          private void AddCalendarItemButton_Click(object sender, RoutedEventArgs e)
          {
          }

          private void CalendarView_CalendarViewDayItemChanging(
              CalendarView sender,
              CalendarViewDayItemChangingEventArgs args)
          {
              if (args.Item == null) return;

              var cellDate = args.Item.Date.DateTime.Date;

              if (_planningDates.Contains(cellDate))
              {
                  args.Item.Background = new SolidColorBrush(Colors.White);
                  args.Item.Foreground = new SolidColorBrush(Colors.Black);
              }
              else
              {
                  args.Item.ClearValue(CalendarViewDayItem.BackgroundProperty);
                  args.Item.ClearValue(CalendarViewDayItem.ForegroundProperty);
              }
          }

          private async void CalendarView_SelectedDatesChanged(
              CalendarView sender,
              CalendarViewSelectedDatesChangedEventArgs args)
          {
              if (args.AddedDates.Count == 0) return;

              var date = args.AddedDates[0].DateTime.Date;
              await ShowPlanningDialog(date);
          }

          private async Task ShowPlanningDialog(DateTime date)
          {
              using var db = new AppDbContext();

              var start = date;
              var end = date.AddDays(1);

              var plannings = db.Appointments
                  .Where(p => p.DateTime >= start && p.DateTime < end)
                  .ToList();

              var listView = new ListView
              {
                  ItemsSource = plannings,
                  DisplayMemberPath = "Location", // Appointment heeft geen "Plan"; gebruik een bestaande eigenschap
                  IsItemClickEnabled = true
              };

              listView.ItemClick += (s, e) =>
              {
                  var item = (Data.Appointment)e.ClickedItem;
                  // navigeren naar detail van item
              };

              var dialog = new ContentDialog
              {
                  Title = $"Plannen op {date:yyyy-MM-dd}",
                  Content = listView,
                  CloseButtonText = "Sluiten",
                  XamlRoot = this.XamlRoot
              };

              await dialog.ShowAsync();
          }

          private void CalendarView_DayItemChanging(
              CalendarView sender,
              CalendarViewDayItemChangingEventArgs args)
          {
              if (args.Item == null) return;

              var cellDate = args.Item.Date.DateTime.Date;

              if (_planningDates.Contains(cellDate))
              {
                  args.Item.Tag = "HasPlanning";
              }
              else
              {
                  args.Item.Tag = null;
              }
          }

          private void Filter_Changed(object sender, object e)
          {
              using var db = new AppDbContext();

              var query = db.Appointments.AsQueryable();

              var today = DateTime.Today;

              TodayPlanningListView.ItemsSource = query
                  .Where(p => p.DateTime >= today && p.DateTime < today.AddDays(1))
                  .ToList();

              HashSet<DateTime> dateTimes = query
                  .Select(p => p.DateTime.Date)
                  .Distinct()
                  .ToHashSet();
              _planningDates = dateTimes;

              calendarView.SelectedDates.Clear();
          }
      }


id: 019d774d-1cce-7026-85e9-006f0cf753ee
conversation_id: 019d7740-ba8d-7075-81e0-d58c86dce8ea
user_id: i287513
agent: App\Ai\Agents\CustomAgent
role: assistant
attachments: []
tool_calls: []
tool_results: []
meta: {"provider":"openai","model":"gpt-5","citations":[]}
created_at: 2026-04-10 14:10:35
updated_at: 2026-04-10 14:10:35
content:
  Hier is een gefixte versie van je AssistantPage backend (consistente DateTime, geen DateOnly, veilige EF Core queries):

  using CareTracker.Data;
  using Microsoft.EntityFrameworkCore;
  using Microsoft.UI;
  using Microsoft.UI.Xaml;
  using Microsoft.UI.Xaml.Controls;
  using Microsoft.UI.Xaml.Controls.Primitives;
  using Microsoft.UI.Xaml.Media;
  using System;
  using System.Collections.Generic;
  using System.Linq;
  using System.Threading.Tasks;
  using CalendarView = Microsoft.UI.Xaml.Controls.CalendarView;
  using CalendarViewDayItem = Microsoft.UI.Xaml.Controls.CalendarViewDayItem;
  using ContentDialog = Microsoft.UI.Xaml.Controls.ContentDialog;
  using ListView = Microsoft.UI.Xaml.Controls.ListView;
  using Page = Microsoft.UI.Xaml.Controls.Page;
  using SolidColorBrush = Microsoft.UI.Xaml.Media.SolidColorBrush;

  namespace CareTracker.Pages.Assistant
  {
      public sealed partial class AssistantPage : Page
      {
          private HashSet<DateTime> _planningDates = new();

          public AssistantPage()
          {
              InitializeComponent();
              RefreshPlanningCache();
              LoadTodayPlanning();
          }

          private void RefreshPlanningCache()
          {
              using var db = new AppDbContext();

              var dates = db.Appointments
                  .AsNoTracking()
                  .Select(p => p.DateTime)
                  .AsEnumerable()             // vanaf hier in-memory
                  .Select(dt => dt.Date)      // alleen datumdeel
                  .Distinct()
                  .ToList();

              _planningDates = new HashSet<DateTime>(dates);
          }

          private void LoadTodayPlanning()
          {
              using var db = new AppDbContext();

              var today = DateTime.Today;
              TodayPlanningListView.ItemsSource = db.Appointments
                  .AsNoTracking()
                  .Where(p => p.DateTime >= today && p.DateTime < today.AddDays(1))
                  .ToList();
          }

          private void AddCalendarItemButton_Click(object sender, RoutedEventArgs e)
          {
          }

          private void CalendarView_CalendarViewDayItemChanging(
              CalendarView sender,
              CalendarViewDayItemChangingEventArgs args)
          {
              if (args.Item == null) return;

              var cellDate = args.Item.Date.DateTime.Date;

              if (_planningDates.Contains(cellDate))
              {
                  args.Item.Background = new SolidColorBrush(Colors.Yellow);
                  args.Item.Foreground = new SolidColorBrush(Colors.Black);
              }
              else
              {
                  args.Item.ClearValue(CalendarViewDayItem.BackgroundProperty);
                  args.Item.ClearValue(CalendarViewDayItem.ForegroundProperty);
              }
          }

          private async void CalendarView_SelectedDatesChanged(
              CalendarView sender,
              CalendarViewSelectedDatesChangedEventArgs args)
          {
              if (args.AddedDates.Count == 0) return;

              var date = args.AddedDates[0].DateTime.Date;
              await ShowPlanningDialog(date);
          }

          private async Task ShowPlanningDialog(DateTime date)
          {
              using var db = new AppDbContext();

              var start = date;
              var end = date.AddDays(1);

              var plannings = db.Appointments
                  .AsNoTracking()
                  .Where(p => p.DateTime >= start && p.DateTime < end)
                  .ToList();

              var listView = new ListView
              {
                  ItemsSource = plannings,
                  DisplayMemberPath = "Location",
                  IsItemClickEnabled = true
              };

              listView.ItemClick += (s, e) =>
              {
                  var item = (Appointment)e.ClickedItem;
                  // navigeren naar detail van item
              };

              var dialog = new ContentDialog
              {
                  Title = $"Plannen op {date:yyyy-MM-dd}",
                  Content = listView,
                  CloseButtonText = "Sluiten",
                  XamlRoot = this.XamlRoot
              };

              await dialog.ShowAsync();
          }

          private void CalendarView_DayItemChanging(
              CalendarView sender,
              CalendarViewDayItemChangingEventArgs args)
          {
              if (args.Item == null) return;

              var cellDate = args.Item.Date.DateTime.Date;
              args.Item.Tag = _planningDates.Contains(cellDate) ? "HasPlanning" : null;
          }

          private void Filter_Changed(object sender, object e)
          {
              using var db = new AppDbContext();

              var query = db.Appointments.AsNoTracking();

              var today = DateTime.Today;

              TodayPlanningListView.ItemsSource = query
                  .Where(p => p.DateTime >= today && p.DateTime < today.AddDays(1))
                  .ToList();

              var dates = query
                  .Select(p => p.DateTime)
                  .AsEnumerable()
                  .Select(dt => dt.Date)
                  .Distinct()
                  .ToList();

              _planningDates = new HashSet<DateTime>(dates);

              calendarView.SelectedDates.Clear();
          }
      }
  }

  Minimaal vereist in je project:
  - using System.Linq; bovenin dit bestand.
  - Packages: Microsoft.EntityFrameworkCore + jouw provider (bijv. Microsoft.EntityFrameworkCore.Sqlite/SqlServer).

usage:
  {"prompt_tokens":1088,"completion_tokens":3009,"cache_write_input_tokens":0,"cache_read_input_tokens":4480,"reasoning_tokens":1920}


id: 019d774d-9731-7200-b47f-1036e391d4f8
conversation_id: 019d773a-d685-71b2-883e-d9254c665f0a
user_id: i303186
agent: App\Ai\Agents\CustomAgent
role: user
attachments: []
tool_calls: []
tool_results: []
usage: []
meta: []
created_at: 2026-04-10 14:11:06
updated_at: 2026-04-10 14:11:06
content:
  waar moet dit? modelBuilder.Entity<PatientClassification>().HasData(
      new PatientClassification { Id = 1, Classification = "Chronische zorg", PatientId = 1 },
      new PatientClassification { Id = 2, Classification = "Diabetes", PatientId = 1 },
      new PatientClassification { Id = 3, Classification = "Hypertensie", PatientId = 1 }
  );


id: 019d774d-973f-725c-abe8-75e81ef41165
conversation_id: 019d773a-d685-71b2-883e-d9254c665f0a
user_id: i303186
agent: App\Ai\Agents\CustomAgent
role: assistant
attachments: []
tool_calls: []
tool_results: []
meta: {"provider":"openai","model":"gpt-4o","citations":[]}
created_at: 2026-04-10 14:11:06
updated_at: 2026-04-10 14:11:06
content:
  De `HasData`-methode moet binnen de `OnModelCreating`-methode van je `DbContext`-klasse worden geplaatst. Deze methode configureert het model dat wordt gebruikt door de context en wordt aangeroepen wanneer het model voor de eerste keer wordt gebouwd.

  Hier is hoe je het toevoegt:

  ```csharp
  public class AppDbContext : DbContext
  {
      public DbSet<Patient> Patients { get; set; }
      public DbSet<Appointment> Appointments { get; set; }
      public DbSet<Report> Reports { get; set; }
      public DbSet<PatientClassification> PatientClassifications { get; set; } // Voeg deze regel toe

      protected override void OnModelCreating(ModelBuilder modelBuilder)
      {
          base.OnModelCreating(modelBuilder);

          modelBuilder.Entity<Patient>().HasData(
              new Patient
              {
                  Id = 1,
                  FirstName = "Jan",
                  LastName = "Jansen",
                  BirthDate = new DateTime(1980, 5, 20),
                  Address = "Straat 1, Stad",
                  PhoneNumber = "0123456789",
                  Email = "jan.jansen@email.com",
                  DoctorId = 1
              }
          );

          modelBuilder.Entity<Appointment>().HasData(
              new Appointment
              {
                  Id = 1,
                  DateTime = DateTime.Now.AddDays(1),
                  PatientId = 1,
                  DoctorId = 1,
                  Location = "Kamer 101",
                  Classifications = new List<string> { "Routine Check-up" }
              }
          );

          modelBuilder.Entity<Report>().HasData(
              new Report
              {
                  Id = 1,
                  Date = DateTime.Now,
                  Content = "De patiënt klaagde over hoofdpijn.",
                  AuthorId = 1,
                  PatientId = 1,
                  AppointmentId = 1
              }
          );

          // Voeg deze configuratie toe voor classificaties
          modelBuilder.Entity<PatientClassification>().HasData(
              new PatientClassification { Id = 1, Classification = "Chronische zorg", PatientId = 1 },
              new PatientClassification { Id = 2, Classification = "Diabetes", PatientId = 1 },
              new PatientClassification { Id = 3, Classification = "Hypertensie", PatientId = 1 }
          );
      }
  }
  ```

  Zorg ervoor dat je `DbSet<PatientClassification>` hebt toegevoegd aan de `AppDbContext` voor toegang tot deze entiteit en om de classificaties te kunnen zien in je database.

usage:
  {"prompt_tokens":1567,"completion_tokens":543,"cache_write_input_tokens":0,"cache_read_input_tokens":3712,"reasoning_tokens":0}


id: 019d774e-5a51-71d1-98a1-129c0285ecbe
conversation_id: 019d773a-d685-71b2-883e-d9254c665f0a
user_id: i303186
agent: App\Ai\Agents\CustomAgent
role: assistant
attachments: []
tool_calls: []
tool_results: []
meta: {"provider":"openai","model":"gpt-4o","citations":[]}
created_at: 2026-04-10 14:11:56
updated_at: 2026-04-10 14:11:56
content:
  Als je ook classificaties aan een `Report` wilt toevoegen, moet je de `Report`-klasse aanpassen en, indien nodig, dienovereenkomstig seeden. Hier is hoe je dat kunt doen:

  ### Report Class
  Zorg ervoor dat de `Report`-klasse een lijst voor classificaties heeft:

  ```csharp
  public class Report
  {
      public int Id { get; set; }
      public DateTime Date { get; set; }
      public string Content { get; set; }
      public int AuthorId { get; set; } // Foreign Key
      public User Author { get; set; }
      public int PatientId { get; set; } // Foreign Key
      public Patient Patient { get; set; }
      public int AppointmentId { get; set; } // Unique Foreign Key
      public Appointment Appointment { get; set; }

      // Voeg classificaties toe
      public List<string> Classifications { get; set; } = new List<string>();
  }
  ```

  ### Seeder
  Zorg ervoor dat je de classificaties ook seedt voor `Report`:

  ```csharp
  modelBuilder.Entity<Report>().HasData(
      new Report
      {
          Id = 1,
          Date = DateTime.Now,
          Content = "De patiënt klaagde over hoofdpijn.",
          AuthorId = 1,
          PatientId = 1,
          AppointmentId = 1,
          Classifications = new List<string> { "Medisch rapport", "Follow-up vereist" } // Voeg classificaties hier toe
      }
  );
  ```

  Aangezien Entity Framework Core geen lijsten van primitieve types direct ondersteunt, moet je mogelijk overwegen een entiteit te maken voor `ReportClassifications`, vergelijkbaar met wat je voor patiënten hebt gedaan. Dit biedt een robuustere manier om classificaties te ondersteunen.

usage:
  {"prompt_tokens":5838,"completion_tokens":380,"cache_write_input_tokens":0,"cache_read_input_tokens":0,"reasoning_tokens":0}


id: 019d774e-b80a-736b-8371-dddc1c2b2622
conversation_id: 019d7740-ba8d-7075-81e0-d58c86dce8ea
user_id: i287513
agent: App\Ai\Agents\CustomAgent
role: assistant
attachments: []
tool_calls: []
tool_results: []
meta: {"provider":"openai","model":"gpt-5","citations":[]}
created_at: 2026-04-10 14:12:20
updated_at: 2026-04-10 14:12:20
content:
  Je mist het generieke type en/of de using. Fix zo:

  - Bovenaan: using System.Collections.Generic;
  - Veld declareren met type-argument:
    private HashSet<DateTime> _planningDates = new HashSet<DateTime>();
    // of (C# 9+):
    private HashSet<DateTime> _planningDates = new();

  Als je toch DateOnly wilt:
  - private HashSet<DateOnly> _planningDates = new();
  - Vergelijk dan met DateOnly.FromDateTime(...).

  Blijft het klagen? Gebruik de volledig gekwalificeerde naam:
  private System.Collections.Generic.HashSet<DateTime> _planningDates = new System.Collections.Generic.HashSet<DateTime>();

usage:
  {"prompt_tokens":1141,"completion_tokens":1222,"cache_write_input_tokens":0,"cache_read_input_tokens":5504,"reasoning_tokens":1024}


id: 019d774f-30c8-73a2-b096-957a38fbc4b5
conversation_id: 019d7740-ba8d-7075-81e0-d58c86dce8ea
user_id: i287513
agent: App\Ai\Agents\CustomAgent
role: assistant
attachments: []
tool_calls: []
tool_results: []
meta: {"provider":"openai","model":"gpt-5","citations":[]}
created_at: 2026-04-10 14:12:51
updated_at: 2026-04-10 14:12:51
content:
  Omdat je C# 8 gebruikt, werkt target-typed new niet. Schrijf het zo én importeer de juiste namespace:

  - Bovenaan: using System.Collections.Generic;
  - Veld:
    private HashSet<DateTime> _planningDates = new HashSet<DateTime>();

  Heb je HashSet<DateOnly> gebruikt? DateOnly bestaat pas in .NET 6; gebruik dan DateTime (of upgrade je target framework).

usage:
  {"prompt_tokens":6805,"completion_tokens":1091,"cache_write_input_tokens":0,"cache_read_input_tokens":0,"reasoning_tokens":960}


id: 019d774f-b904-7037-9913-aaedf33ad85c
conversation_id: 019d773a-d685-71b2-883e-d9254c665f0a
user_id: i303186
agent: App\Ai\Agents\CustomAgent
role: user
attachments: []
tool_calls: []
tool_results: []
usage: []
meta: []
created_at: 2026-04-10 14:13:26
updated_at: 2026-04-10 14:13:26
content:
  als ik nu naar patient detail paga zie ik niet in de details staan hier de code: <?xml version="1.0" encoding="utf-8"?>
  <Page
      x:Class="CareTracker.Pages.Patient.PatientPage"
      xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
      xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
      xmlns:local="using:CareTracker.Pages.Patient"
      xmlns:d="http://schemas.microsoft.com/expression/blend/2008"
      xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" xmlns:models="using:CareTracker.Data"
      mc:Ignorable="d">

      <Grid>
          <Grid.RowDefinitions>
              <RowDefinition Height="Auto"/>
              <RowDefinition Height="*"/>
          </Grid.RowDefinitions>
          <Grid Grid.Row="0" Background="#FF2D3E50" Padding="10">
              <StackPanel Orientation="Horizontal">
                  <Button Content="Home"
                          Margin="10,0"
                          Click="HomeButton_Click"
                          Style="{StaticResource HeaderButtonStyle}"/>

                  <Button Content="Afsprakenoverzicht"
                          Margin="10,0"
                          Click="AppointmentsOverviewButton_Click"
                          Style="{StaticResource HeaderButtonStyle}"/>

                  <Button Content="Afspraken maken"
                          Margin="10,0"
                          Click="MakeAppointmentsButton_Click"
                          Style="{StaticResource HeaderButtonStyle}"/>

                  <Button Content="Profiel"
                          Margin="10,0"
                          Click="ProfileButton_Click"
                          Style="{StaticResource HeaderButtonStyle}"/>

                  <Button Content="Uitloggen"
                          Margin="10,0"
                          Click="LogoutButton_Click"
                          Style="{StaticResource HeaderButtonStyle}"
                          HorizontalAlignment="Right"/>
              </StackPanel>
          </Grid>

          <Grid Grid.Row="1">
              <Grid.ColumnDefinitions>
                  <ColumnDefinition Width="2*"/>
                  <ColumnDefinition Width="1*"/>
              </Grid.ColumnDefinitions>

              <StackPanel Grid.Column="0" Margin="10">
                  <TextBox PlaceholderText="Search patients..."
                           TextChanged="SearchBox_TextChanged"/>

                  <ListView x:Name="PatientListView" 
                            Margin="0,10"
                            SelectionChanged="PatientListView_SelectionChanged">
                      <ListView.ItemTemplate>
                          <DataTemplate x:DataType="models:Patient">
                              <StackPanel Orientation="Vertical">
                                  <TextBlock Text="{x:Bind FirstName}" FontWeight="Bold"/>
                                  <TextBlock Text="{x:Bind LastName}" Margin="0,0,0,10"/>
                              </StackPanel>
                          </DataTemplate>
                      </ListView.ItemTemplate>
                  </ListView>
              </StackPanel>

              <StackPanel Grid.Column="1" Margin="10"
                  x:Name="PatientDetailsPanel">
                  <TextBlock Text="Patient Details" FontSize="24" FontWeight="Bold" Margin="0,0,0,10"/>

                  <TextBlock Text="{Binding FirstName}" FontWeight="Bold"/>
                  <TextBlock Text="{Binding LastName}"/>
                  <TextBlock Text="{Binding BirthDate}"/>
                  <TextBlock Text="{Binding Address}"/>
                  <TextBlock Text="{Binding PhoneNumber}"/>
                  <TextBlock Text="{Binding Email}"/>
              </StackPanel>
          </Grid>

      </Grid>
  </Page>using CareTracker.Data;
  using CareTracker.Pages.Login;
  using Microsoft.EntityFrameworkCore;
  using Microsoft.UI.Xaml;
  using Microsoft.UI.Xaml.Controls;
  using Microsoft.UI.Xaml.Controls.Primitives;
  using Microsoft.UI.Xaml.Data;
  using Microsoft.UI.Xaml.Input;
  using Microsoft.UI.Xaml.Media;
  using Microsoft.UI.Xaml.Navigation;
  using System;
  using System.Collections.Generic;
  using System.IO;
  using System.Linq;
  using System.Runtime.InteropServices.WindowsRuntime;
  using Windows.Foundation;
  using Windows.Foundation.Collections;
  using Windows.UI;



  namespace CareTracker.Pages.Patient
  {
   
      public sealed partial class PatientPage : Page
      {
          private List<CareTracker.Data.Patient> allPatients = new List<CareTracker.Data.Patient>();

          public PatientPage()
          {
              InitializeComponent();
              LoadPatients();
          }

          private void LoadPatients()
          {
              using (var dbContext = new AppDbContext())
              {
                  PatientListView.ItemsSource = dbContext.Patients.ToList();
              }
          }

          private void SearchBox_TextChanged(object sender, TextChangedEventArgs e)
          {
              //Leest de zoekopdracht en zet deze om naar kleine letters.
              var query = ((TextBox)sender).Text.ToLower();

              using (var dbContext = new AppDbContext())
              {
                  PatientListView.ItemsSource = dbContext.Patients
                      .Where(p => p.FirstName.ToLower().Contains(query) ||
                                  p.LastName.ToLower().Contains(query))
                      .ToList();
              }
          }
          private void PatientListView_SelectionChanged(object sender, SelectionChangedEventArgs e)
          {
              // Als een patiënt is geselecteerd, toon dan de details in het detailpaneel.
              PatientDetailsPanel.DataContext = PatientListView.SelectedItem as CareTracker.Data.Patient;
          }

          private void HomeButton_Click(object sender, RoutedEventArgs e)
          {
              // Implement navigation to the home page
          }

          private void AppointmentsOverviewButton_Click(object sender, RoutedEventArgs e)
          {
              // Implement navigation to the appointments overview page
          }

          private void MakeAppointmentsButton_Click(object sender, RoutedEventArgs e)
          {
              // Implement navigation to the make appointments page
          }

          private void ProfileButton_Click(object sender, RoutedEventArgs e)
          {
              // Implement navigation to the profile page
          }

          private void LogoutButton_Click(object sender, RoutedEventArgs e)
          {
              LoggedInUser.CurrentUser = null;
              Frame.Navigate(typeof(LoginPage));
          }
      }
  }


id: 019d774f-b91e-73b9-b8d6-4123a9af3ceb
conversation_id: 019d773a-d685-71b2-883e-d9254c665f0a
user_id: i303186
agent: App\Ai\Agents\CustomAgent
role: assistant
attachments: []
tool_calls: []
tool_results: []
meta: {"provider":"openai","model":"gpt-4o","citations":[]}
created_at: 2026-04-10 14:13:26
updated_at: 2026-04-10 14:13:26
content:
  Als je geen gegevens in het detailpaneel ziet, kunnen er een paar mogelijke oorzaken zijn:

  1. **Geen selectie**: Zorg ervoor dat een patiënt is geselecteerd in de `ListView`. Controleer of `PatientListView_SelectionChanged` wordt aangeroepen.

  2. **Data Binding Issues**: Controleer of de `DataContext` correct is ingesteld in `PatientDetailsPanel`. Zorg ervoor dat `PatientDetailsPanel.DataContext` wordt bijgewerkt met de geselecteerde patiënt.

  3. **Verkeerd Gebonden Eigenschap**: Controleer of de eigenschapsnamen in je `TextBlock` bindings overeenkomen met de eigenschappen van de `Patient`-klasse:

     ```xml
     <TextBlock Text="{Binding FirstName}" FontWeight="Bold"/>
     <TextBlock Text="{Binding LastName}"/>
     <TextBlock Text="{Binding BirthDate, StringFormat='{}{0:dd-MM-yyyy}'}"/>
     <TextBlock Text="{Binding Address}"/>
     <TextBlock Text="{Binding PhoneNumber}"/>
     <TextBlock Text="{Binding Email}"/>
     ```

  4. **Mogelijke Storing in XAML**: Controleer of er geen XAML-fout is die de weergave beïnvloedt.

  5. **Initialiseer alle Velden**: Zorg ervoor dat alle velden van de `Patient`-objecten, die je aan `ItemsSource` toewijst, correct zijn geïnitieerd.

  Controleer deze punten om er zeker van te zijn dat alles correct functioneert. Als het probleem zich blijft voordoen, probeer dan `e.OldItems` en `e.NewItems` in de `SelectionChanged`-eventhandler te loggen om te controleren of er een item is geselecteerd.

usage:
  {"prompt_tokens":1834,"completion_tokens":363,"cache_write_input_tokens":0,"cache_read_input_tokens":5632,"reasoning_tokens":0}


id: 019d7750-495e-72f8-b136-750a3085a300
conversation_id: 019d773a-d685-71b2-883e-d9254c665f0a
user_id: i303186
agent: App\Ai\Agents\CustomAgent
role: assistant
attachments: []
tool_calls: []
tool_results: []
meta: {"provider":"openai","model":"gpt-4o","citations":[]}
created_at: 2026-04-10 14:14:03
updated_at: 2026-04-10 14:14:03
content:
  Om classificaties aan het detailpaneel toe te voegen, moet je ervoor zorgen dat de `Patient`-klasse een lijst van classificaties heeft. Vervolgens voeg je daar binding aan toe in de XAML. Hier is hoe je dit kunt doen:

  ### Patient Class
  Controleer of je `Patient`-klasse classificaties ondersteunt:

  ```csharp
  public class Patient
  {
      public int Id { get; set; }
      public string FirstName { get; set; }
      public string LastName { get; set; }
      public DateTime BirthDate { get; set; }
      public string Address { get; set; }
      public string PhoneNumber { get; set; }
      public string Email { get; set; }
      public int DoctorId { get; set; } // Foreign Key
      public User Doctor { get; set; }

      // Voeg classificaties toe
      public List<string> Classifications { get; set; } = new List<string>();
  }
  ```

  ### XAML
  Voeg een ListView toe aan je detailpaneel om de classificaties weer te geven:

  ```xml
  <StackPanel Grid.Column="1" Margin="10" x:Name="PatientDetailsPanel">
      <TextBlock Text="Patient Details" FontSize="24" FontWeight="Bold" Margin="0,0,0,10"/>
      <TextBlock Text="{Binding FirstName}" FontWeight="Bold"/>
      <TextBlock Text="{Binding LastName}"/>
      <TextBlock Text="{Binding BirthDate, StringFormat='{}{0:dd-MM-yyyy}'}"/>
      <TextBlock Text="{Binding Address}"/>
      <TextBlock Text="{Binding PhoneNumber}"/>
      <TextBlock Text="{Binding Email}"/>

      <!-- Voeg hier de classificaties toe -->
      <TextBlock Text="Classificaties:" FontWeight="Bold" Margin="0,10,0,0"/>
      <ListView ItemsSource="{Binding Classifications}">
          <ListView.ItemTemplate>
              <DataTemplate>
                  <TextBlock Text="{Binding}" />
              </DataTemplate>
          </ListView.ItemTemplate>
      </ListView>
  </StackPanel>
  ```

  ### Controleer Data

  Zorg ervoor dat wanneer je patiëntgegevens seeden, je ook classificaties toevoegt:

  ```csharp
  modelBuilder.Entity<Patient>().HasData(
      new Patient
      {
          Id = 1,
          FirstName = "Jan",
          LastName = "Jansen",
          BirthDate = new DateTime(1980, 5, 20),
          Address = "Straat 1, Stad",
          PhoneNumber = "0123456789",
          Email = "jan.jansen@email.com",
          DoctorId = 1,
          Classifications = new List<string> { "Chronische zorg", "Diabetes" }
      }
  );
  ```

  Met deze aanpassingen zou je de classificaties als onderdeel van de patiëntdetails moeten kunnen zien. Zorg ervoor dat de bindingen correct zijn en dat de patientgegevens inclusief classificaties juist worden geladen.

usage:
  {"prompt_tokens":7842,"completion_tokens":631,"cache_write_input_tokens":0,"cache_read_input_tokens":0,"reasoning_tokens":0}


id: 019d7750-70ce-7190-9c09-d33e45e8c87c
conversation_id: 019d7740-ba8d-7075-81e0-d58c86dce8ea
user_id: i287513
agent: App\Ai\Agents\CustomAgent
role: assistant
attachments: []
tool_calls: []
tool_results: []
meta: {"provider":"openai","model":"gpt-5","citations":[]}
created_at: 2026-04-10 14:14:13
updated_at: 2026-04-10 14:14:13
content:
  Je hoeft normaal geen eigen HashSet te maken, maar als je het toch wilt (of moet), hier een simpele vervanger die werkt in C# 8.

  MyHashSet.cs
  using System;
  using System.Collections.Generic;
  using System.Linq;

  namespace CareTracker.Utils
  {
      // Eenvoudige HashSet-achtige collectie op basis van Dictionary
      public class MyHashSet<T>
      {
          private readonly Dictionary<T, byte> _dict;

          public MyHashSet() : this(null) { }

          public MyHashSet(IEqualityComparer<T> comparer)
          {
              _dict = new Dictionary<T, byte>(comparer ?? EqualityComparer<T>.Default);
          }

          public MyHashSet(IEnumerable<T> items, IEqualityComparer<T> comparer = null)
              : this(comparer)
          {
              if (items == null) return;
              foreach (var item in items)
                  _dict[item] = 0;
          }

          public bool Add(T item)
          {
              if (_dict.ContainsKey(item)) return false;
              _dict[item] = 0;
              return true;
          }

          public bool Contains(T item) => _dict.ContainsKey(item);

          public void Clear() => _dict.Clear();

          public int Count => _dict.Count;

          public IEnumerable<T> Items => _dict.Keys;

          public void UnionWith(IEnumerable<T> items)
          {
              if (items == null) return;
              foreach (var item in items)
                  _dict[item] = 0;
          }
      }

      // Handige extensie als vervanger voor ToHashSet
      public static class EnumerableExtensions
      {
          public static MyHashSet<T> ToMyHashSet<T>(this IEnumerable<T> source)
              => new MyHashSet<T>(source);
      }
  }

  Gebruik in AssistantPage
  - Vervang HashSet door MyHashSet.
  - Gebruik ToMyHashSet() of de constructor.

  using CareTracker.Data;
  using CareTracker.Utils; // <-- deze using toevoegen
  using Microsoft.EntityFrameworkCore;
  using Microsoft.UI;
  using Microsoft.UI.Xaml;
  using Microsoft.UI.Xaml.Controls;
  using Microsoft.UI.Xaml.Media;
  using System;
  using System.Collections.Generic;
  using System.Linq;
  using System.Threading.Tasks;
  using CalendarView = Microsoft.UI.Xaml.Controls.CalendarView;
  using CalendarViewDayItem = Microsoft.UI.Xaml.Controls.CalendarViewDayItem;
  using ContentDialog = Microsoft.UI.Xaml.Controls.ContentDialog;
  using ListView = Microsoft.UI.Xaml.Controls.ListView;
  using Page = Microsoft.UI.Xaml.Controls.Page;
  using SolidColorBrush = Microsoft.UI.Xaml.Media.SolidColorBrush;

  namespace CareTracker.Pages.Assistant
  {
      public sealed partial class AssistantPage : Page
      {
          private MyHashSet<DateTime> _planningDates = new MyHashSet<DateTime>();

          public AssistantPage()
          {
              InitializeComponent();
              RefreshPlanningCache();
              LoadTodayPlanning();
          }

          private void RefreshPlanningCache()
          {
              using var db = new AppDbContext();

              var dates = db.Appointments
                  .AsNoTracking()
                  .Select(p => p.DateTime)
                  .AsEnumerable()        // in-memory
                  .Select(dt => dt.Date) // alleen datumdeel
                  .Distinct();

              _planningDates = new MyHashSet<DateTime>(dates);
              // of: _planningDates = dates.ToMyHashSet();
          }

          private void LoadTodayPlanning()
          {
              using var db = new AppDbContext();

              var today = DateTime.Today;
              TodayPlanningListView.ItemsSource = db.Appointments
                  .AsNoTracking()
                  .Where(p => p.DateTime >= today && p.DateTime < today.AddDays(1))
                  .ToList();
          }

          private void CalendarView_CalendarViewDayItemChanging(
              CalendarView sender,
              CalendarViewDayItemChangingEventArgs args)
          {
              if (args.Item == null) return;

              var cellDate = args.Item.Date.DateTime.Date;

              if (_planningDates.Contains(cellDate))
              {
                  args.Item.Background = new SolidColorBrush(Colors.Yellow);
                  args.Item.Foreground = new SolidColorBrush(Colors.Black);
              }
              else
              {
                  args.Item.ClearValue(CalendarViewDayItem.BackgroundProperty);
                  args.Item.ClearValue(CalendarViewDayItem.ForegroundProperty);
              }
          }

          private async void CalendarView_SelectedDatesChanged(
              CalendarView sender,
              CalendarViewSelectedDatesChangedEventArgs args)
          {
              if (args.AddedDates.Count == 0) return;

              var date = args.AddedDates[0].DateTime.Date;
              await ShowPlanningDialog(date);
          }

          private async Task ShowPlanningDialog(DateTime date)
          {
              using var db = new AppDbContext();

              var start = date;
              var end = date.AddDays(1);

              var plannings = db.Appointments
                  .AsNoTracking()
                  .Where(p => p.DateTime >= start && p.DateTime < end)
                  .ToList();

              var listView = new ListView
              {
                  ItemsSource = plannings,
                  DisplayMemberPath = "Location",
                  IsItemClickEnabled = true
              };

              listView.ItemClick += (s, e) =>
              {
                  var item = (Appointment)e.ClickedItem;
                  // navigeren naar detail
              };

              var dialog = new ContentDialog
              {
                  Title = $"Plannen op {date:yyyy-MM-dd}",
                  Content = listView,
                  CloseButtonText = "Sluiten",
                  XamlRoot = this.XamlRoot
              };

              await dialog.ShowAsync();
          }

          private void CalendarView_DayItemChanging(
              CalendarView sender,
              CalendarViewDayItemChangingEventArgs args)
          {
              if (args.Item == null) return;

              var cellDate = args.Item.Date.DateTime.Date;
              args.Item.Tag = _planningDates.Contains(cellDate) ? "HasPlanning" : null;
          }

          private void Filter_Changed(object sender, object e)
          {
              using var db = new AppDbContext();

              var query = db.Appointments.AsNoTracking();

              var today = DateTime.Today;

              TodayPlanningListView.ItemsSource = query
                  .Where(p => p.DateTime >= today && p.DateTime < today.AddDays(1))
                  .ToList();

              var dates = query
                  .Select(p => p.DateTime)
                  .AsEnumerable()
                  .Select(dt => dt.Date)
                  .Distinct();

              _planningDates = new MyHashSet<DateTime>(dates);
              calendarView.SelectedDates.Clear();
          }
      }
  }

  Opmerking:
  - Dit is alleen nodig als je om wat voor reden dan ook System.Collections.Generic.HashSet<T> niet kunt gebruiken. In vrijwel alle .NET-doelen (ook met C# 8) bestaat HashSet<T> gewoon; dan volstaat:
    using System.Collections.Generic;
    private HashSet<DateTime> _planningDates = new HashSet<DateTime>();

usage:
  {"prompt_tokens":126,"completion_tokens":2993,"cache_write_input_tokens":0,"cache_read_input_tokens":6784,"reasoning_tokens":1536}


id: 019d7751-c996-719d-8712-c5d73ac9a836
conversation_id: 019d773a-d685-71b2-883e-d9254c665f0a
user_id: i303186
agent: App\Ai\Agents\CustomAgent
role: user
attachments: []
tool_calls: []
tool_results: []
usage: []
meta: []
created_at: 2026-04-10 14:15:41
updated_at: 2026-04-10 14:15:41
content:
  oke dat werkt maar nu staat de text classificaties altijd erin ookal heb ik een patient niet aangeklikt als ik een patient aan klik moet de classification text ook op komen


id: 019d7751-c9a5-717a-bc22-179f9eceb3fa
conversation_id: 019d773a-d685-71b2-883e-d9254c665f0a
user_id: i303186
agent: App\Ai\Agents\CustomAgent
role: assistant
attachments: []
tool_calls: []
tool_results: []
meta: {"provider":"openai","model":"gpt-4o","citations":[]}
created_at: 2026-04-10 14:15:41
updated_at: 2026-04-10 14:15:41
content:
  Om ervoor te zorgen dat de tekst "Classificaties:" alleen wordt weergegeven wanneer er een patiënt is geselecteerd, kun je werken met `Visibility` en een `DataTrigger`. Hier is hoe je dat kunt doen:

  ### XAML aanpassing

  Je kunt de `Visibility` van de classificatietekst en de lijst laten afhangen van de aanwezigheid van classificaties of een geselecteerde patiënt:

  ```xml
  <StackPanel Grid.Column="1" Margin="10" x:Name="PatientDetailsPanel">
      <TextBlock Text="Patient Details" FontSize="24" FontWeight="Bold" Margin="0,0,0,10"/>
      <TextBlock Text="{Binding FirstName}" FontWeight="Bold"/>
      <TextBlock Text="{Binding LastName}"/>
      <TextBlock Text="{Binding BirthDate, StringFormat='{}{0:dd-MM-yyyy}'}"/>
      <TextBlock Text="{Binding Address}"/>
      <TextBlock Text="{Binding PhoneNumber}"/>
      <TextBlock Text="{Binding Email}"/>

      <!-- Voeg hier de classificaties toe -->
      <TextBlock x:Name="ClassificationsLabel" Text="Classificaties:" FontWeight="Bold" Margin="0,10,0,0" Visibility="Collapsed"/>
      <ListView x:Name="ClassificationsListView" ItemsSource="{Binding Classifications}" Visibility="Collapsed">
          <ListView.ItemTemplate>
              <DataTemplate>
                  <TextBlock Text="{Binding}" />
              </DataTemplate>
          </ListView.ItemTemplate>
      </ListView>
  </StackPanel>
  ```

  ### Code Behind

  Pas het `SelectionChanged`-event aan om de `Visibility` in te stellen:

  ```csharp
  private void PatientListView_SelectionChanged(object sender, SelectionChangedEventArgs e)
  {
      var selectedPatient = PatientListView.SelectedItem as CareTracker.Data.Patient;

      // Stel de DataContext in
      PatientDetailsPanel.DataContext = selectedPatient;

      // Controleer of er classificaties zijn
      if (selectedPatient != null && selectedPatient.Classifications.Any())
      {
          ClassificationsLabel.Visibility = Visibility.Visible;
          ClassificationsListView.Visibility = Visibility.Visible;
      }
      else
      {
          ClassificationsLabel.Visibility = Visibility.Collapsed;
          ClassificationsListView.Visibility = Visibility.Collapsed;
      }
  }
  ```

  ### Uitleg

  - **Visibility**: De `Visibility` van zowel de tekst "Classificaties:" als de `ListView` is standaard ingesteld op `Collapsed`.
  - **Controle**: Wanneer een patiënt wordt geselecteerd, controleert de code of er classificaties zijn. Als dat zo is, worden de elementen zichtbaar; anders blijven ze verborgen. 

  Op deze manier worden de classificaties en de daarbij behorende koptekst alleen weergegeven wanneer er een patiënt is geselecteerd en er classificaties aanwezig zijn.

usage:
  {"prompt_tokens":8515,"completion_tokens":589,"cache_write_input_tokens":0,"cache_read_input_tokens":0,"reasoning_tokens":0}


id: 019d7752-4ec8-701d-b750-d00e244cbfcb
conversation_id: 019d7740-ba8d-7075-81e0-d58c86dce8ea
user_id: i287513
agent: App\Ai\Agents\CustomAgent
role: assistant
attachments: []
tool_calls: []
tool_results: []
meta: {"provider":"openai","model":"gpt-5","citations":[]}
created_at: 2026-04-10 14:16:16
updated_at: 2026-04-10 14:16:16
content:
  Je gebruikt T buiten een generieke class. Maak de class generiek, zet het veld erin, importeer de juiste namespace en instantieer met een concreet type.

  Zo werkt het (copy-paste als MyHashSet.cs):

  using System.Collections.Generic;

  namespace CareTracker.Utils
  {
      public class MyHashSet<T>
      {
          private readonly Dictionary<T, byte> _dict;

          public MyHashSet() : this(null) { }

          public MyHashSet(IEqualityComparer<T> comparer)
          {
              _dict = new Dictionary<T, byte>(comparer ?? EqualityComparer<T>.Default);
          }

          public MyHashSet(IEnumerable<T> items, IEqualityComparer<T> comparer = null)
              : this(comparer)
          {
              if (items == null) return;
              foreach (var item in items)
                  _dict[item] = 0;
          }

          public bool Add(T item)
          {
              if (_dict.ContainsKey(item)) return false;
              _dict[item] = 0;
              return true;
          }

          public bool Contains(T item) => _dict.ContainsKey(item);

          public void Clear() => _dict.Clear();

          public int Count => _dict.Count;

          public IEnumerable<T> Items => _dict.Keys;
      }
  }

  Gebruik in je page:

  using CareTracker.Utils;
  // ...
  private MyHashSet<DateTime> _planningDates = new MyHashSet<DateTime>();

  Belangrijk:
  - Zet private readonly Dictionary<T, byte> _dict; binnen de class MyHashSet<T>.
  - Zorg dat using System.Collections.Generic; bovenaan staat.
  - Instantieer altijd met een concreet type, zoals MyHashSet<DateTime>.

usage:
  {"prompt_tokens":8378,"completion_tokens":1420,"cache_write_input_tokens":0,"cache_read_input_tokens":0,"reasoning_tokens":1024}


id: 019d7752-bfd5-73c8-9a3f-ac5a8b932a1c
conversation_id: 019d7737-3fb2-7009-b80e-66dac560e3f6
user_id: D294954
agent: App\Ai\Agents\CustomAgent
role: assistant
attachments: []
tool_calls: []
tool_results: []
meta: {"provider":"openai","model":"gpt-4o","citations":[]}
created_at: 2026-04-10 14:16:45
updated_at: 2026-04-10 14:16:45
content:
  Om ervoor te zorgen dat de header de volledige breedte van de pagina beslaat, moeten we de `StackPanel` met de header binnen een `Grid`-element plaatsen die de volledige breedte inneemt. Hier is hoe je dat kunt doen:

  ### VerslagOverzicht.xaml

  ```xml
  <Page x:Class="CareTracker.Pages.Verslag.VerslagOverzicht"
        xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
        xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
        xmlns:local="clr-namespace:CareTracker.Pages.Verslag"
        Width="800" Height="600">

      <Grid>
          <Grid.RowDefinitions>
              <RowDefinition Height="Auto"/> <!-- Header -->
              <RowDefinition Height="*"/> <!-- Content -->
          </Grid.RowDefinitions>

          <!-- Header -->
          <Grid Grid.Row="0" Background="#FF2D3E50">
              <StackPanel Orientation="Horizontal" Padding="10">
                  <Button Content="Home" Margin="10,0" Click="HomeButton_Click"/>
                  <Button Content="Afsprakenoverzicht" Margin="10,0" Click="AppointmentsOverviewButton_Click"/>
                  <Button Content="Afspraken maken" Margin="10,0" Click="MakeAppointmentsButton_Click"/>
                  <Button Content="Profiel" Margin="10,0" Click="ProfileButton_Click"/>
                  <Button Content="Uitloggen" Margin="10,0" Click="LogoutButton_Click" HorizontalAlignment="Right"/>
              </StackPanel>
          </Grid>

          <!-- Content -->
          <Grid Grid.Row="1" Margin="10">
              <Grid.ColumnDefinitions>
                  <ColumnDefinition Width="2*"/>
                  <ColumnDefinition Width="3*"/>
              </Grid.ColumnDefinitions>

              <!-- Zoekbalk en patiëntenlijst -->
              <StackPanel Grid.Column="0" Margin="10">
                  <TextBox x:Name="SearchBox" Width="200" Height="30" Margin="0,0,0,10"/>
                  <ListView x:Name="PatientList" SelectionChanged="PatientList_SelectionChanged"/>
              </StackPanel>

              <!-- Verslagen van de geselecteerde patiënt en details -->
              <StackPanel Grid.Column="1" Margin="10">
                  <TextBlock Text="Selecteer een patiënt om verslagen te bekijken" FontWeight="Bold" Margin="0,0,0,10"/>
                  <ListView x:Name="ReportList" SelectionChanged="ReportList_SelectionChanged"/>
                  <TextBox x:Name="ReportDetails" Margin="0,10,0,0" Height="150" IsReadOnly="True" TextWrapping="Wrap"/>
              </StackPanel>
          </Grid>
      </Grid>
  </Page>
  ```

  ### Uitleg

  - **`Grid` voor de Header**: We hebben de `StackPanel` voor de header in een `Grid` geplaatst om ervoor te zorgen dat de header de volledige breedte gebruikt.
  - **`HorizontalAlignment` in StackPanel**: De header-elementen worden horizontaal uitgelijnd, maar je zou extra aanpassingen kunnen maken voor specifieke requirements, zoals `HorizontalAlignment`.

  Probeer deze aanpassing en kijk of het aansluit bij je verwachtingen. Laat het me weten als je verdere aanpassingen wilt!

usage:
  {"prompt_tokens":16404,"completion_tokens":695,"cache_write_input_tokens":0,"cache_read_input_tokens":0,"reasoning_tokens":0}


id: 019d7752-db3d-707e-9cc0-461e0361820a
conversation_id: 019d7740-ba8d-7075-81e0-d58c86dce8ea
user_id: i287513
agent: App\Ai\Agents\CustomAgent
role: assistant
attachments: []
tool_calls: []
tool_results: []
meta: {"provider":"openai","model":"gpt-5","citations":[]}
created_at: 2026-04-10 14:16:52
updated_at: 2026-04-10 14:16:52
content:
  Die “T’tjes” komen van generics in C#: T betekent “Type” en is een plaatsvervanger voor het echte type dat jij later invult.

  Kort:
  - Je declareert de typeparameter tussen < > bij een class of methode: public class MyHashSet<T> { ... }
  - Binnen die class mag je T gebruiken alsof het een echt type is: private Dictionary<T, byte> _dict;
  - Als je de class gebruikt, vul je T in met een concreet type: var set = new MyHashSet<DateTime>();

  Voorbeeld
  public class MyHashSet<T>
  {
      private readonly Dictionary<T, byte> _dict = new Dictionary<T, byte>();
      public bool Add(T item) { if (_dict.ContainsKey(item)) return false; _dict[item]=0; return true; }
      public bool Contains(T item) => _dict.ContainsKey(item);
  }

  Gebruik:
  var dates = new MyHashSet<DateTime>();
  dates.Add(DateTime.Today);

  Belangrijk:
  - Zet de T in de classnaam: class MyHashSet<T> { ... } — anders “kent” C# de T niet.
  - Je kunt T elke naam geven (TItem, TKey, TValue), T is alleen een conventie.
  - Wil je geen generics? Maak dan een specifieke class voor één type, bv. class MyDateTimeSet { ... } maar generics zijn flexibeler.

usage:
  {"prompt_tokens":419,"completion_tokens":1037,"cache_write_input_tokens":0,"cache_read_input_tokens":8320,"reasoning_tokens":704}


id: 019d7753-7ab5-71c9-9b5f-683b5eb39221
conversation_id: 019d7740-ba8d-7075-81e0-d58c86dce8ea
user_id: i287513
agent: App\Ai\Agents\CustomAgent
role: assistant
attachments: []
tool_calls: []
tool_results: []
meta: {"provider":"openai","model":"gpt-5","citations":[]}
created_at: 2026-04-10 14:17:32
updated_at: 2026-04-10 14:17:32
content:
  Klopt, C# 8 is prima — generics (die “T’tjes”) werken gewoon in C# 8. Je problemen komen niet door de C#‑versie maar door:
  - target‑typed new ontbreekt in C# 8
  - DateOnly bestaat niet op jouw target
  - en/of je hebt de generieke class niet goed gedeclareerd

  Aanrader: gebruik de ingebouwde HashSet (werkt in C# 8)

  - Bovenaan: using System.Collections.Generic; using System.Linq;

  - Veld:
  private HashSet<DateTime> _planningDates = new HashSet<DateTime>();

  - Cache vullen (EF Core-vriendelijk, zonder DateOnly/ToHashSet):
  private void RefreshPlanningCache()
  {
      using var db = new AppDbContext();

      var dates = db.Appointments
          .AsNoTracking()
          .Select(p => p.DateTime)   // alleen kolom ophalen
          .ToList();

      _planningDates = new HashSet<DateTime>(dates.Select(d => d.Date)); // alleen datumdeel
  }

  - In Filter_Changed net zo:
  var dates = query
      .Select(p => p.DateTime)
      .ToList();
  _planningDates = new HashSet<DateTime>(dates.Select(d => d.Date));

  Wil je per se je eigen “MyHashSet”? Zo ziet die eruit in C# 8

  MyHashSet.cs
  using System.Collections.Generic;

  namespace CareTracker.Utils
  {
      public class MyHashSet<T>
      {
          private readonly Dictionary<T, byte> _dict;

          public MyHashSet() : this(null) { }

          public MyHashSet(IEqualityComparer<T> comparer)
          {
              _dict = new Dictionary<T, byte>(comparer ?? EqualityComparer<T>.Default);
          }

          public MyHashSet(IEnumerable<T> items, IEqualityComparer<T> comparer = null)
              : this(comparer)
          {
              if (items == null) return;
              foreach (var item in items)
                  _dict[item] = 0;
          }

          public bool Add(T item)
          {
              if (_dict.ContainsKey(item)) return false;
              _dict[item] = 0;
              return true;
          }

          public bool Contains(T item) => _dict.ContainsKey(item);

          public void Clear() => _dict.Clear();

          public int Count => _dict.Count;

          public IEnumerable<T> Items => _dict.Keys;
      }
  }

  Gebruik:
  using CareTracker.Utils;
  // …
  private MyHashSet<DateTime> _planningDates = new MyHashSet<DateTime>();

  Samengevat:
  - C# 8 ondersteunt generics volledig; “T” is gewoon de typeparameter.
  - Vermijd DateOnly; gebruik DateTime en .Date.
  - In C# 8 geen target‑typed new, dus new HashSet<DateTime>(…).

usage:
  {"prompt_tokens":350,"completion_tokens":2020,"cache_write_input_tokens":0,"cache_read_input_tokens":8704,"reasoning_tokens":1408}


id: 019d7754-d22b-711a-96a5-7d266801f129
conversation_id: 019d7737-3fb2-7009-b80e-66dac560e3f6
user_id: D294954
agent: App\Ai\Agents\CustomAgent
role: user
attachments: []
tool_calls: []
tool_results: []
usage: []
meta: []
created_at: 2026-04-10 14:19:00
updated_at: 2026-04-10 14:19:00
content:
  pakt je wel voor alles heel de pagina want alles staat wel mooi in het midden maar ik wil dat je heel de scherm gebruik dus dat de headerbar helemaal van links naar rechts ga


id: 019d7754-d23c-73bc-ab43-b8f7a670d166
conversation_id: 019d7737-3fb2-7009-b80e-66dac560e3f6
user_id: D294954
agent: App\Ai\Agents\CustomAgent
role: assistant
attachments: []
tool_calls: []
tool_results: []
meta: {"provider":"openai","model":"gpt-4o","citations":[]}
created_at: 2026-04-10 14:19:00
updated_at: 2026-04-10 14:19:00
content:
  Natuurlijk! Om ervoor te zorgen dat de header de volledige breedte van het scherm in beslag neemt, moeten we ervoor zorgen dat deze geen marges of andere beperkingen heeft die de breedte beperken. Hier is een aangepaste versie:

  ### VerslagOverzicht.xaml

  ```xml
  <Page x:Class="CareTracker.Pages.Verslag.VerslagOverzicht"
        xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
        xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
        xmlns:local="clr-namespace:CareTracker.Pages.Verslag"
        Width="800" Height="600">

      <Grid>
          <Grid.RowDefinitions>
              <RowDefinition Height="Auto"/> <!-- Header -->
              <RowDefinition Height="*"/> <!-- Content -->
          </Grid.RowDefinitions>

          <!-- Header -->
          <Grid Grid.Row="0" Background="#FF2D3E50">
              <StackPanel Orientation="Horizontal" HorizontalAlignment="Stretch" VerticalAlignment="Center" Padding="10">
                  <Button Content="Home" Margin="10,0" Click="HomeButton_Click"/>
                  <Button Content="Afsprakenoverzicht" Margin="10,0" Click="AppointmentsOverviewButton_Click"/>
                  <Button Content="Afspraken maken" Margin="10,0" Click="MakeAppointmentsButton_Click"/>
                  <Button Content="Profiel" Margin="10,0" Click="ProfileButton_Click"/>
                  <Button Content="Uitloggen" Margin="10,0" Click="LogoutButton_Click" HorizontalAlignment="Right"/>
              </StackPanel>
          </Grid>

          <!-- Content -->
          <Grid Grid.Row="1">
              <Grid.ColumnDefinitions>
                  <ColumnDefinition Width="2*"/>
                  <ColumnDefinition Width="3*"/>
              </Grid.ColumnDefinitions>

              <!-- Zoekbalk en patiëntenlijst -->
              <StackPanel Grid.Column="0" Margin="10">
                  <TextBox x:Name="SearchBox" Width="200" Height="30" Margin="0,0,0,10"/>
                  <ListView x:Name="PatientList" SelectionChanged="PatientList_SelectionChanged"/>
              </StackPanel>

              <!-- Verslagen van de geselecteerde patiënt en details -->
              <StackPanel Grid.Column="1" Margin="10">
                  <TextBlock Text="Selecteer een patiënt om verslagen te bekijken" FontWeight="Bold" Margin="0,0,0,10"/>
                  <ListView x:Name="ReportList" SelectionChanged="ReportList_SelectionChanged"/>
                  <TextBox x:Name="ReportDetails" Margin="0,10,0,0" Height="150" IsReadOnly="True" TextWrapping="Wrap"/>
              </StackPanel>
          </Grid>
      </Grid>
  </Page>
  ```

  ### Belangrijke Aanpassingen

  - **`HorizontalAlignment="Stretch"`**: Dit zorgt ervoor dat je `StackPanel` zich uitstrekt over de volle breedte van de `Grid`.
  - **Geen Marges op `Grid` voor Header**: We hebben geen margins of paddings toegepast op het `Grid` waarin de header is geplaatst.

  Als je vragen hebt of andere aanpassingen wilt, hoor ik het graag!

usage:
  {"prompt_tokens":17142,"completion_tokens":676,"cache_write_input_tokens":0,"cache_read_input_tokens":0,"reasoning_tokens":0}


id: 019d7755-6eb7-71fb-8a67-abff19bbfef1
conversation_id: 019d7740-ba8d-7075-81e0-d58c86dce8ea
user_id: i287513
agent: App\Ai\Agents\CustomAgent
role: assistant
attachments: []
tool_calls: []
tool_results: []
meta: {"provider":"openai","model":"gpt-5","citations":[]}
created_at: 2026-04-10 14:19:40
updated_at: 2026-04-10 14:19:40
content:
  Kort: Een “typenloze” HashSet bestaat niet. In C# 8 moet je altijd het type opgeven.

  Werkende alternatieven:
  - Standaard
    using System.Collections.Generic;
    private HashSet<DateTime> _planningDates = new HashSet<DateTime>();

  - Volledig gekwalificeerd (als using mist)
    private System.Collections.Generic.HashSet<System.DateTime> _planningDates =
        new System.Collections.Generic.HashSet<System.DateTime>();

  - Type-alias (dan kun je new zonder <T> schrijven)
    // bovenaan bestand:
    using DateSet = System.Collections.Generic.HashSet<System.DateTime>;
    // veld:
    private DateSet _planningDates = new DateSet();

  - Wrapper class (verbergt de <T> in eigen type)
    public class DateSet : HashSet<DateTime> { }
    private DateSet _planningDates = new DateSet();

  Wil je helemaal geen generics gebruiken? Dan heb je geen HashSet; gebruik bv. Dictionary<DateTime, byte> als “set” (minder mooi):
  private Dictionary<DateTime, byte> _planningDates = new Dictionary<DateTime, byte>();

usage:
  {"prompt_tokens":711,"completion_tokens":1182,"cache_write_input_tokens":0,"cache_read_input_tokens":8960,"reasoning_tokens":896}


id: 019d7756-827a-71db-ba3c-21c280a9cb7e
conversation_id: 019d7756-6f2a-70c5-abf5-144869a4de7a
user_id: i303564
agent: App\Ai\Agents\CustomAgent
role: user
attachments: []
tool_calls: []
tool_results: []
usage: []
meta: []
created_at: 2026-04-10 14:20:51
updated_at: 2026-04-10 14:20:51
content:
  Omdat er een maximaal aantal deelnemers in 1 les en 1 lokaal terecht kunnen komen, moeten de gebruikers kunnen reserveren en dan wordt de hoeveelheid dan steeds vermindert. 
  Voor dat de gebruiker iets boekt moet de status van de class dan planned zijn maar moet het ook niet bijvoorbeeld beschikbaar zijn om de deelnemers te laten weten dat er een inschrijf mogelijkheid is en als de les geboekt is dat de status dan naar geboekt verandert wordt en als de les al vol geboekt is dat de status dan naar vol gewisseld wordt. Zijn dit niet waardes die in de database opgeslagen moeten worden of kan dat gewoon met de backend in de controller gedaan worden


id: 019d7756-8282-7234-8a66-52c1c861b887
conversation_id: 019d7756-6f2a-70c5-abf5-144869a4de7a
user_id: i303564
agent: App\Ai\Agents\CustomAgent
role: assistant
attachments: []
tool_calls: []
tool_results: []
meta: {"provider":"openai","model":"gpt-4o","citations":[]}
created_at: 2026-04-10 14:20:51
updated_at: 2026-04-10 14:20:51
content:
  Voor een dergelijk systeem is het belangrijk om statusinformatie zowel in de database als in de backend te beheren. Hier is een aanpak die beide combineert:

  ### Database Aanpak

  1. **Class Status:**
     - Voeg een extra status toe aan je `Class` entiteit, zoals `available` en `full`. 
     - Bijvoorbeeld: `Status (planned, available, booked, full, completed)`

  2. **Class_Participant Management:**
     - Houd bij hoeveel deelnemers zich hebben ingeschreven voor elke les.
     - Als de maximale capaciteit is bereikt, update de status naar `full`.

  ### Backend Controller Logica

  1. **Reserveren:**
     - Controleer of de status `available` is voordat een gebruiker zich inschrijft.
     - Verminder na een succesvolle inschrijving het beschikbaar aantal plaatsen.
     - Update de status naar `booked` zodra een gebruiker zich inschrijft.
     - Update de status naar `full` als de maximale capaciteit is bereikt.

  2. **Status Beheer:**
     - Gebruik backend-logica om automatisch te bepalen of een les `available`, `booked`, of `full` is, gebaseerd op het aantal ingeschreven deelnemers.

  3. **Event Handling:**
     - Implementeer event listeners of observers om automatisch de status te updaten wanneer aanmeldingen of annuleringen plaatsvinden.

  Door zowel database-informatie als backend-logica te gebruiken, kun je de integriteit van je systemen garanderen en gebruikers adequaat informeren over de status van lessen. Dit zorgt voor een robuuste oplossing waarbij de beschikbare capaciteit altijd up-to-date is.

usage:
  {"prompt_tokens":6115,"completion_tokens":334,"cache_write_input_tokens":0,"cache_read_input_tokens":0,"reasoning_tokens":0}


id: 019d7756-de1d-72be-8072-a4df504b30c4
conversation_id: 019d7737-3fb2-7009-b80e-66dac560e3f6
user_id: D294954
agent: App\Ai\Agents\CustomAgent
role: assistant
attachments: []
tool_calls: []
tool_results: []
meta: {"provider":"openai","model":"gpt-4o","citations":[]}
created_at: 2026-04-10 14:21:14
updated_at: 2026-04-10 14:21:14
content:
  Laten we ervoor zorgen dat de header echt de volledige breedte van het scherm gebruikt door het `Grid` correct te configureren:

  ### VerslagOverzicht.xaml

  ```xml
  <Page x:Class="CareTracker.Pages.Verslag.VerslagOverzicht"
        xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
        xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
        xmlns:local="clr-namespace:CareTracker.Pages.Verslag"
        Width="800" Height="600">

      <Grid>
          <Grid.RowDefinitions>
              <RowDefinition Height="Auto"/> <!-- Header -->
              <RowDefinition Height="*"/> <!-- Content -->
          </Grid.RowDefinitions>

          <!-- Header -->
          <StackPanel Grid.Row="0" Orientation="Horizontal" Background="#FF2D3E50" HorizontalAlignment="Stretch">
              <Button Content="Home" Margin="10,0" Click="HomeButton_Click"/>
              <Button Content="Afsprakenoverzicht" Margin="10,0" Click="AppointmentsOverviewButton_Click"/>
              <Button Content="Afspraken maken" Margin="10,0" Click="MakeAppointmentsButton_Click"/>
              <Button Content="Profiel" Margin="10,0" Click="ProfileButton_Click"/>
              <Button Content="Uitloggen" Margin="10,0" Click="LogoutButton_Click" HorizontalAlignment="Right"/>
          </StackPanel>

          <!-- Content -->
          <Grid Grid.Row="1" Margin="10">
              <Grid.ColumnDefinitions>
                  <ColumnDefinition Width="2*"/>
                  <ColumnDefinition Width="3*"/>
              </Grid.ColumnDefinitions>

              <!-- Zoekbalk en patiëntenlijst -->
              <StackPanel Grid.Column="0" Margin="10">
                  <TextBox x:Name="SearchBox" Width="200" Height="30" Margin="0,0,0,10"/>
                  <ListView x:Name="PatientList" SelectionChanged="PatientList_SelectionChanged"/>
              </StackPanel>

              <!-- Verslagen van de geselecteerde patiënt en details -->
              <StackPanel Grid.Column="1" Margin="10">
                  <TextBlock Text="Selecteer een patiënt om verslagen te bekijken" FontWeight="Bold" Margin="0,0,0,10"/>
                  <ListView x:Name="ReportList" SelectionChanged="ReportList_SelectionChanged"/>
                  <TextBox x:Name="ReportDetails" Margin="0,10,0,0" Height="150" IsReadOnly="True" TextWrapping="Wrap"/>
              </StackPanel>
          </Grid>
      </Grid>
  </Page>
  ```

  ### Belangrijke Aanpassingen

  - **Gebruik van StackPanel in plaats van een binnenste Grid:** Door `StackPanel` in de `Grid.Row="0"` te plaatsen en `HorizontalAlignment="Stretch"` toe te passen, zorgt het ervoor dat de header de volledige breedte beslaat.
  - **Verwijder marges die de breedte kunnen beperken.**

  Probeer dit en laat me weten of dit is wat je zoekt!

usage:
  {"prompt_tokens":950,"completion_tokens":644,"cache_write_input_tokens":0,"cache_read_input_tokens":16896,"reasoning_tokens":0}


id: 019d7757-4949-72ef-bec8-6ba8e2abb8de
conversation_id: 019d7757-492e-73d0-a845-e79963f741f1
user_id: i302789
agent: App\Ai\Agents\CustomAgent
role: assistant
attachments: []
tool_calls: []
tool_results: []
meta: {"provider":"openai","model":"gpt-4o","citations":[]}
created_at: 2026-04-10 14:21:42
updated_at: 2026-04-10 14:21:42
content:
  To style a (not working) carousel using FluxUI in a Laravel project with Tailwind CSS, follow these steps to create a visually appealing layout. While this won't add the functionality, it will give you a good base for your carousel's styling.

  ### Prerequisites

  Ensure you have the necessary setup:
  - A Laravel project.
  - Tailwind CSS configured.
  - FluxUI (if you are using a specific package or library, ensure it’s installed).

  ### Example Carousel HTML

  Let's set up a basic carousel structure. This will include containers for carousel items and navigational elements.

  ```html
  <div class="carousel relative">
    <div class="carousel-inner flex overflow-hidden">
      <div class="carousel-item w-full bg-blue-500 text-white flex justify-center items-center h-64">
        Slide 1
      </div>
      <div class="carousel-item w-full bg-green-500 text-white flex justify-center items-center h-64">
        Slide 2
      </div>
      <div class="carousel-item w-full bg-red-500 text-white flex justify-center items-center h-64">
        Slide 3
      </div>
    </div>
    <button class="prev absolute left-0 top-1/2 transform -translate-y-1/2 bg-gray-800 text-white px-3 py-1">Prev</button>
    <button class="next absolute right-0 top-1/2 transform -translate-y-1/2 bg-gray-800 text-white px-3 py-1">Next</button>
  </div>
  ```

  ### Tailwind CSS Styling

  To style the carousel, use Tailwind to define the layout and styling properties. You might want to include:

  - **Flexbox** for container alignment.
  - **Absolute positioning** for navigation buttons.
  - **Responsive units** for adaptability.

  ### Example Tailwind CSS

  ```css
  .carousel {
    @apply relative w-full max-w-lg mx-auto mt-10;
  }

  .carousel-inner {
    @apply flex overflow-hidden;
  }

  .carousel-item {
    @apply w-full h-64 flex items-center justify-center transition-transform duration-500 ease-in-out transform;
  }

  button {
    @apply absolute top-1/2 transform -translate-y-1/2 bg-gray-800 text-white px-3 py-1 rounded shadow-lg hover:bg-gray-700;
  }

  .prev {
    @apply left-0;
  }

  .next {
    @apply right-0;
  }
  ```

  ### JavaScript (for Interaction, Optional)

  To make it functional, you can add JavaScript or a library like Swiper or Slick. Here's a simple JavaScript example for navigation:

  ```html
  <script>
    document.querySelector('.next').addEventListener('click', function() {
      const inner = document.querySelector('.carousel-inner');
      inner.appendChild(inner.firstElementChild);
    });

    document.querySelector('.prev').addEventListener('click', function() {
      const inner = document.querySelector('.carousel-inner');
      inner.insertBefore(inner.lastElementChild, inner.firstChild);
    });
  </script>
  ```

  ### Conclusion

  This setup provides a non-functional styled carousel using Tailwind CSS and Flexbox layout. For full functionality, consider integrating with a library or extending the JavaScript logic as needed.

usage:
  {"prompt_tokens":39,"completion_tokens":673,"cache_write_input_tokens":0,"cache_read_input_tokens":0,"reasoning_tokens":0}


id: 019d7757-a46d-7145-9905-ed7894ac40da
conversation_id: 019d7757-a45f-7335-bf0c-57c11ab649fe
user_id: i287513
agent: App\Ai\Agents\CustomAgent
role: user
attachments: []
tool_calls: []
tool_results: []
usage: []
meta: []
created_at: 2026-04-10 14:22:05
updated_at: 2026-04-10 14:22:05
content:
  Duplicate 'System.Reflection.AssemblyInformationalVersionAttribute' attribute[assembly: System.Reflection.AssemblyProductAttribute("CareTracker")] using System;
  using System.Reflection;

  [assembly: System.Reflection.AssemblyCompanyAttribute("CareTracker")]
  [assembly: System.Reflection.AssemblyConfigurationAttribute("Debug")]
  [assembly: System.Reflection.AssemblyFileVersionAttribute("1.0.0.0")]
  [assembly: System.Reflection.AssemblyInformationalVersionAttribute("1.0.0+1cc8c7ea0ab341d47cc1cfe15275a7113d52b6bb")]
  [assembly: System.Reflection.AssemblyProductAttribute("CareTracker")]
  [assembly: System.Reflection.AssemblyTitleAttribute("CareTracker")]
  [assembly: System.Reflection.AssemblyVersionAttribute("1.0.0.0")]
  [assembly: System.Runtime.Versioning.TargetPlatformAttribute("Windows10.0.19041.0")]
  [assembly: System.Runtime.Versioning.SupportedOSPlatformAttribute("Windows10.0.17763.0")]

  // Generated by the MSBuild WriteCodeFragment class.


id: 019d7757-a47a-70ee-905b-cdaccbab6ff2
conversation_id: 019d7757-a45f-7335-bf0c-57c11ab649fe
user_id: i287513
agent: App\Ai\Agents\CustomAgent
role: assistant
attachments: []
tool_calls: []
tool_results: []
meta: {"provider":"openai","model":"gpt-5","citations":[]}
created_at: 2026-04-10 14:22:05
updated_at: 2026-04-10 14:22:05
content:
  Je krijgt deze fout omdat het attribuut AssemblyInformationalVersion op meer dan één plek wordt gegenereerd/gedefinieerd. In SDK‑stijl .NET projecten genereert MSBuild automatisch AssemblyInfo-attributen in obj/.../AssemblyInfo.cs. Als je ze óók handmatig in je code (bijv. Properties/AssemblyInfo.cs) of via csproj‑eigenschappen/NuGet‑packages instelt, krijg je “Duplicate ‘…Attribute’”.

  Wat je kunt doen:

  Snelle fix (meestal het beste):
  - Verwijder je eigen AssemblyInfo.cs (of haal daar de regels met AssemblyInformationalVersion, AssemblyProduct, enz. uit).
  - Beheer versies en metadata via je .csproj met eigenschappen als:
    - Company, Product, Title, Version, FileVersion, AssemblyVersion, InformationalVersion.

  Voorbeeld .csproj-fragment:
    <PropertyGroup>
      <Company>CareTracker</Company>
      <Product>CareTracker</Product>
      <Title>CareTracker</Title>
      <Version>1.0.0</Version>
      <FileVersion>1.0.0.0</FileVersion>
      <AssemblyVersion>1.0.0.0</AssemblyVersion>
      <InformationalVersion>1.0.0+1cc8c7ea0ab341d47cc1cfe15275a7113d52b6bb</InformationalVersion>
    </PropertyGroup>

  Alternatief: automatische generatie uitschakelen
  - Als je je eigen AssemblyInfo.cs wilt behouden, zet dit in je .csproj:
    <PropertyGroup>
      <GenerateAssemblyInfo>false</GenerateAssemblyInfo>
    </PropertyGroup>
  - Of schakel alleen de conflicterende attributen uit:
    <PropertyGroup>
      <GenerateAssemblyInformationalVersionAttribute>false</GenerateAssemblyInformationalVersionAttribute>
      <GenerateAssemblyProductAttribute>false</GenerateAssemblyProductAttribute>
      <!-- voeg indien nodig meer toe -->
    </PropertyGroup>

  Let op:
  - Bewerk het gegenereerde bestand in obj niet; dat wordt telkens overschreven.
  - Je snippet laat AssemblyProduct twee keer zien in hetzelfde bestand. Dat wijst erop dat het attribuut zowel via projecteigenschappen (bijv. <Product>) als via een AssemblyAttribute‑item/NuGet package wordt toegevoegd. Controleer je .csproj en verwijder één van de bronnen.
  - Gebruik je een versiepackage (bijv. Nerdbank.GitVersioning of GitVersion.MsBuild)? Die zetten vaak zelf InformationalVersion. Verwijder dan je eigen [assembly: AssemblyInformationalVersion(...)] en/of de <InformationalVersion> property, of configureer het package zodat het geen duplicaat veroorzaakt.

  Na de wijziging:
  - Voer een Clean uit en verwijder eventueel bin/ en obj/ mappen, daarna opnieuw bouwen.

  Als je je .csproj plaatst, kan ik exact aangeven welke regel(s) je het beste aanpast.

usage:
  {"prompt_tokens":232,"completion_tokens":2699,"cache_write_input_tokens":0,"cache_read_input_tokens":0,"reasoning_tokens":2048}


id: 019d7758-f22c-71e3-a6a1-12ff8cba5ace
conversation_id: 019d7644-29d4-7190-a8ad-d8f1c60a7014
user_id: i293082
agent: App\Ai\Agents\CustomAgent
role: user
attachments: []
tool_calls: []
tool_results: []
usage: []
meta: []
created_at: 2026-04-10 14:23:31
updated_at: 2026-04-10 14:23:31
content:
  private void LogoutButton_Click(object sender, RoutedEventArgs e)
    {
        LoggedInUser.CurrentUser = null;
        Frame.Navigate(typeof(LoginPage));
    }

    private void CreatePatientButton_Click(object sender, RoutedEventArgs e)
    {
        string firstName = FirstNameTextBox.Text.Trim();
        string lastName = LastNameTextBox.Text.Trim();
        DateTime? birthDate = BirthDatePicker.SelectedDate?.DateTime;
        string address = AddressTextBox.Text.Trim();
        string phoneNumber = PhoneNumberTextBox.Text.Trim();
        string email = EmailTextBox.Text.Trim();
        string classificatie = (ClassificatieComboBox.SelectedItem as ComboBoxItem)?.Content.ToString();

        if (string.IsNullOrWhiteSpace(firstName) || string.IsNullOrWhiteSpace(lastName) || string.IsNullOrWhiteSpace(email))
        {
            // Show an error message to the user
            return;
        }

        using var db = new AppDbContext();

        var newPatient = new Data.Patient
        {
            FirstName = firstName,
            LastName = lastName,
            BirthDate = birthDate.Value,
            Address = address,
            PhoneNumber = phoneNumber,
            Email = email
        };

        db.SaveChanges();
        Frame.Navigate(typeof(PatientPage));
        // Optionally, navigate back to the patient overview page or clear the input fields
    }

    private void SaveButton_Click(object sender, RoutedEventArgs e)
    {
        
    } Hoe maak ik het dat ik nu mijn patient opsla in de database


id: 019d7758-f249-7289-bf6d-a1834d1011fc
conversation_id: 019d7644-29d4-7190-a8ad-d8f1c60a7014
user_id: i293082
agent: App\Ai\Agents\CustomAgent
role: assistant
attachments: []
tool_calls: []
tool_results: []
meta: {"provider":"openai","model":"gpt-4o","citations":[]}
created_at: 2026-04-10 14:23:31
updated_at: 2026-04-10 14:23:31
content:
  Om ervoor te zorgen dat je de patiënt kunt opslaan in de database, controleer of je de volgende stappen hebt geïmplementeerd:

  1. **Database Context Configuratie:**
     - Zorg ervoor dat je `AppDbContext` correct is geconfigureerd om de `Patient`-entiteit te beheren.

  2. **Patient Entiteit Toevoegen:**
     - Voeg de nieuwe patiënt toe aan de `DbSet<Patient>` in je context voordat je de wijzigingen opslaat.

  3. **Foutafhandeling:**
     - Voeg foutafhandeling toe om eventuele problemen bij het opslaan te identificeren.

  Hier is de bijgewerkte `CreatePatientButton_Click`-methode:

  ```csharp
  private void CreatePatientButton_Click(object sender, RoutedEventArgs e)
  {
      try
      {
          string firstName = FirstNameTextBox.Text.Trim();
          string lastName = LastNameTextBox.Text.Trim();
          DateTime? birthDate = BirthDatePicker.SelectedDate?.DateTime;
          string address = AddressTextBox.Text.Trim();
          string phoneNumber = PhoneNumberTextBox.Text.Trim();
          string email = EmailTextBox.Text.Trim();
          string gender = (GenderComboBox.SelectedItem as ComboBoxItem)?.Content?.ToString();
          string classificatie = (ClassificatieComboBox.SelectedItem as ComboBoxItem)?.Content.ToString();

          if (string.IsNullOrWhiteSpace(firstName) || string.IsNullOrWhiteSpace(lastName) || string.IsNullOrWhiteSpace(email) || !birthDate.HasValue || string.IsNullOrWhiteSpace(gender))
          {
              MessageBox.Show("Vul alle verplichte velden in.", "Fout", MessageBoxButton.OK, MessageBoxImage.Error);
              return;
          }

          using (var db = new AppDbContext())
          {
              var newPatient = new Patient
              {
                  FirstName = firstName,
                  LastName = lastName,
                  BirthDate = birthDate.Value,
                  Address = address,
                  PhoneNumber = phoneNumber,
                  Email = email,
                  Gender = gender
                  // Voeg classificatie toe als het een eigenschap is
              };

              db.Patients.Add(newPatient); // Voeg de patiënt toe aan de DbSet
              db.SaveChanges(); // Sla de wijzigingen op
          }

          Frame.Navigate(typeof(PatientPage));
      }
      catch (Exception ex)
      {
          MessageBox.Show($"Er is een fout opgetreden: {ex.Message}", "Fout", MessageBoxButton.OK, MessageBoxImage.Error);
      }
  }
  ```

  ### Opmerkingen:

  - **Validatie:** Zorg dat je alle noodzakelijke velden controleert.
  - **Classificatie:** Voeg extra logica toe als de classificatie een deel moet uitmaken van de patiëntgegevens.
  - **Foutafhandeling:** Voeg exception handling toe om gebruikers te informeren over eventuele fouten.
  - **Database Context:** Controleer je `AppDbContext` configuratie om ervoor te zorgen dat het `DbSet<Patient>` correct is gedefinieerd.

usage:
  {"prompt_tokens":7691,"completion_tokens":634,"cache_write_input_tokens":0,"cache_read_input_tokens":0,"reasoning_tokens":0}


id: 019d7759-fbab-71ee-9eb4-fe1d1f784ece
conversation_id: 019d774a-88a2-737b-9e94-ed68def26a60
user_id: i302573
agent: App\Ai\Agents\CustomAgent
role: user
attachments: []
tool_calls: []
tool_results: []
usage: []
meta: []
created_at: 2026-04-10 14:24:39
updated_at: 2026-04-10 14:24:39
content:
  <?php

  namespace App\Filament\Blogger\Resources\Posts\Schemas;

  use Filament\Schemas\Schema;
  use Filament\Forms\Components\TextInput;
  use Filament\Forms\Components\Textarea;
  use Filament\Forms\Components\Select;
  use Filament\Forms\Components\Section;
  class PostForm
  {
      public static function configure(Schema $schema): Schema
      {
          return $schema
              ->components([
          Section::make('Bestelling Informatie')
                      ->schema([
                          TextInput::make('order_number')
                              ->label('Ordernummer')
                              ->disabled()
                              ->dehydrated(false),
                          
                          TextInput::make('customer_name')
                              ->label('Klant Naam')
                              ->disabled()
                              ->dehydrated(false)
                              ->formatStateUsing(fn ($record) => $record?->user_id == 0 ? 'Deleted' : ($record?->user?->name ?? 'Onbekend')),
                          
                          TextInput::make('customer_email')
                              ->label('Klant Email')
                              ->disabled()
                              ->dehydrated(false)
                              ->formatStateUsing(fn ($record) => $record?->user_id == 0 ? 'Deleted' : ($record?->user?->email ?? 'Onbekend')),
                          
                          TextInput::make('phone_number')
                              ->label('Telefoonnummer')
                              ->disabled()
                              ->dehydrated(false),
                          
                          TextInput::make('total_amount')
                              ->label('Totaalbedrag')
                              ->disabled()
                              ->dehydrated(false)
                              ->prefix('€')
                              ->formatStateUsing(fn ($state) => number_format($state, 2, ',', '.')),
                      ])
                      ->columns(2),
              ]);
      }
  }


  <?php

  namespace App\Models;

  use Illuminate\Database\Eloquent\Factories\HasFactory;
  use Illuminate\Database\Eloquent\Model;
  use Illuminate\Database\Eloquent\Relations\BelongsTo;
  use Illuminate\Database\Eloquent\Relations\HasMany;

  class Post extends Model
  {
      use HasFactory;

      protected $fillable = [
          'blog_id',
          'title',
          'body',
          'image_url',
          'continent',
          'country_name',
          'place_name',
          'categories',
          'total_likes',
          'total_rating',
          'total_views',
          'created_at',
      ];

      protected $casts = [
          'total_likes'  => 'integer',
          'total_views'  => 'integer',
          'total_rating' => 'float',
          'created_at'   => 'datetime',
      ];

      // Relationships

      public function getBlogFromPost(): BelongsTo
      {
          return $this->belongsTo(Blog::class, 'blog_id');
      }

      public function getCommentsFromPost(): HasMany
      {
          return $this->hasMany(Comment::class);
      }

      public function getPostLikesFromPost(): HasMany
      {
          return $this->hasMany(PostLike::class);
      }

      public function getPostRatingsFromPost(): HasMany
      {
          return $this->hasMany(PostRating::class);
      }

      public function getViewsFromPost(): HasMany
      {
          return $this->hasMany(UserPostRead::class);
      }

      // Helpers

      public function isPostFromUser(int $userId): bool
      {
          return $this->getBlogFromPost()->where('author_id', $userId)->exists();
      }
  }

  Fix that please and make it work


id: 019d7759-fbb7-7393-8874-dc5e63bb7c3b
conversation_id: 019d774a-88a2-737b-9e94-ed68def26a60
user_id: i302573
agent: App\Ai\Agents\CustomAgent
role: assistant
attachments: []
tool_calls: []
tool_results: []
meta: {"provider":"openai","model":"gpt-5-mini","citations":[]}
created_at: 2026-04-10 14:24:39
updated_at: 2026-04-10 14:24:39
content:
  Je probleem komt doordat je in je vormcode naar $record->user probeert te lezen, maar je Post-model geen user()-relatie heeft (en mogelijk ook geen user_id in fillable). Voeg de relatie toe en zorg dat de User-model accessor altijd een string teruggeeft. Hieronder staan de benodigde aanpassingen en korte uitleg.

  1) User-model: veilige name-accessor (zodat Filament nooit null krijgt)
  Plaats dit in app/Models/User.php (of pas je bestaande accessor aan):

  ```php
  // app/Models/User.php

  public function getNameAttribute($value): string
  {
      // 1) Gebruik expliciet de name-kolom als die gevuld is
      if (!empty($value)) {
          return $value;
      }

      // 2) Als je first_name + last_name gebruikt
      $first = $this->first_name ?? '';
      $last  = $this->last_name ?? '';
      $full  = trim("{$first} {$last}");
      if ($full !== '') {
          return $full;
      }

      // 3) Fallback op email of username
      if (!empty($this->email)) {
          return $this->email;
      }
      if (!empty($this->username)) {
          return $this->username;
      }

      // 4) Laatste fallback
      return 'Gebruiker';
  }
  ```

  2) Post-model: voeg de relatie naar User toe en voeg user_id toe aan fillable (als gewenst)

  ```php
  // app/Models/Post.php

  use Illuminate\Database\Eloquent\Relations\BelongsTo;

  class Post extends Model
  {
      use HasFactory;

      protected $fillable = [
          'blog_id',
          'user_id', // voeg dit toe als je user_id gebruikt
          'title',
          'body',
          'image_url',
          'continent',
          'country_name',
          'place_name',
          'categories',
          'total_likes',
          'total_rating',
          'total_views',
          'created_at',
      ];

      // ... bestaand werk ...

      // Voeg deze relatie toe:
      public function user(): BelongsTo
      {
          return $this->belongsTo(\App\Models\User::class, 'user_id');
      }

      // de rest van je methods blijft hetzelfde
  }
  ```

  Als je Post-tabel nog geen user_id-kolom heeft, maak dan een migratie:

  php artisan make:migration add_user_id_to_posts_table --table=posts

  In de migratie:
  ```php
  public function up()
  {
      Schema::table('posts', function (Blueprint $table) {
          $table->unsignedBigInteger('user_id')->nullable()->after('blog_id');
          $table->foreign('user_id')->references('id')->on('users')->onDelete('set null');
      });
  }
  ```

  3) PostForm: houd je formatStateUsing maar zorg dat je relatie bestaat
  Je oorspronkelijke closure is prima als de relatie user() bestaat. Bijvoorbeeld:

  ```php
  // App\Filament\Blogger\Resources\Posts\Schemas\PostForm.php

  TextInput::make('customer_name')
      ->label('Klant Naam')
      ->disabled()
      ->dehydrated(false)
      ->formatStateUsing(fn ($record) => $record?->user_id === 0
          ? 'Deleted'
          : ($record?->user?->name ?? 'Onbekend')),
  ```

  En voor email:

  ```php
  TextInput::make('customer_email')
      ->label('Klant Email')
      ->disabled()
      ->dehydrated(false)
      ->formatStateUsing(fn ($record) => $record?->user_id === 0
          ? 'Deleted'
          : ($record?->user?->email ?? 'Onbekend')),
  ```

  4) Cache en testen
  - Voer eventueel composer dump-autoload uit.
  - Maak caches schoon:
    php artisan cache:clear
    php artisan config:clear
    php artisan route:clear
    php artisan view:clear

  5) Extra controle als je nog de FilamentManager-fout had
  Die fout (FilamentManager::getUserName(): Return value must be of type string, null returned) ontstond door een null-naam op de ingelogde gebruiker. Met de User-accessor hierboven is dat opgelost, omdat die altijd een string teruggeeft. Mocht de fout blijven: deel de exacte stacktrace zodat ik kan checken of de ingelogde user null is (bijv. auth()->user() is null) of dat iets anders teruggeeft.

  Als je wil, kan ik:
  - de exacte migratie maken als je me vertelt of posts.user_id al bestaat,
  - je volledige aangepaste PostForm terugzetten met alle velden geïntegreerd,
  - of controleren of Filament versie-specifieke closures andere parameters verwachten (ik kan je exacte Filament-versie gebruiken om dat na te gaan).

usage:
  {"prompt_tokens":1841,"completion_tokens":2053,"cache_write_input_tokens":0,"cache_read_input_tokens":0,"reasoning_tokens":1024}


id: 019d775b-3b56-7102-b400-c99c19aabc07
conversation_id: 019d775b-3b45-70b3-bf1c-995c7b7d18ff
user_id: i302573
agent: App\Ai\Agents\CustomAgent
role: user
attachments: []
tool_calls: []
tool_results: []
usage: []
meta: []
created_at: 2026-04-10 14:26:00
updated_at: 2026-04-10 14:26:00
content:
  <?php

  namespace App\Models;

  use Illuminate\Database\Eloquent\Factories\HasFactory;
  use Illuminate\Database\Eloquent\Model;
  use Illuminate\Database\Eloquent\Relations\BelongsTo;
  use Illuminate\Database\Eloquent\Relations\HasMany;

  class Post extends Model
  {
      use HasFactory;

      protected $fillable = [
          'blog_id',
          'title',
          'body',
          'image_url',
          'continent',
          'country_name',
          'place_name',
          'categories',
          'total_likes',
          'total_rating',
          'total_views',
          'created_at',
      ];

      protected $casts = [
          'total_likes'  => 'integer',
          'total_views'  => 'integer',
          'total_rating' => 'float',
          'created_at'   => 'datetime',
      ];

      // Relationships

      public function getBlogFromPost(): BelongsTo
      {
          return $this->belongsTo(Blog::class, 'blog_id');
      }

      public function getCommentsFromPost(): HasMany
      {
          return $this->hasMany(Comment::class);
      }

      public function getPostLikesFromPost(): HasMany
      {
          return $this->hasMany(PostLike::class);
      }

      public function getPostRatingsFromPost(): HasMany
      {
          return $this->hasMany(PostRating::class);
      }

      public function getViewsFromPost(): HasMany
      {
          return $this->hasMany(UserPostRead::class);
      }

      // Helpers

      public function isPostFromUser(int $userId): bool
      {
          return $this->getBlogFromPost()->where('author_id', $userId)->exists();
      }
  }


  thats the model i need to use and this is a example of filament fix it please:
  <?php

  namespace App\Filament\Blogger\Resources\Posts\Schemas;

  use Filament\Schemas\Schema;
  use Filament\Forms\Components\TextInput;
  use Filament\Forms\Components\Textarea;
  use Filament\Forms\Components\Select;
  use Filament\Forms\Components\Section;
  class PostForm
  {
      public static function configure(Schema $schema): Schema
      {
          return $schema
              ->components([
          Section::make('Bestelling Informatie')
                      ->schema([
                          TextInput::make('order_number')
                              ->label('Ordernummer')
                              ->disabled()
                              ->dehydrated(false),
                          
                          TextInput::make('customer_name')
                              ->label('Klant Naam')
                              ->disabled()
                              ->dehydrated(false)
                              ->formatStateUsing(fn ($record) => $record?->user_id == 0 ? 'Deleted' : ($record?->user?->name ?? 'Onbekend')),
                          
                          TextInput::make('customer_email')
                              ->label('Klant Email')
                              ->disabled()
                              ->dehydrated(false)
                              ->formatStateUsing(fn ($record) => $record?->user_id == 0 ? 'Deleted' : ($record?->user?->email ?? 'Onbekend')),
                          
                          TextInput::make('phone_number')
                              ->label('Telefoonnummer')
                              ->disabled()
                              ->dehydrated(false),
                          
                          TextInput::make('total_amount')
                              ->label('Totaalbedrag')
                              ->disabled()
                              ->dehydrated(false)
                              ->prefix('€')
                              ->formatStateUsing(fn ($state) => number_format($state, 2, ',', '.')),
                      ])
                      ->columns(2),
              ]);
      }
  }


id: 019d775b-3b75-739c-b430-c6a797eec8db
conversation_id: 019d775b-3b45-70b3-bf1c-995c7b7d18ff
user_id: i302573
agent: App\Ai\Agents\CustomAgent
role: assistant
attachments: []
tool_calls: []
tool_results: []
meta: {"provider":"openai","model":"gpt-5-mini","citations":[]}
created_at: 2026-04-10 14:26:00
updated_at: 2026-04-10 14:26:00
content:
  <?php

  namespace App\Filament\Blogger\Resources\Posts\Schemas;

  use Filament\Schemas\Schema;
  use Filament\Forms\Components\TextInput;
  use Filament\Forms\Components\Textarea;
  use Filament\Forms\Components\Select;
  use Filament\Forms\Components\Section;
  use Filament\Forms\Components\FileUpload;
  use Filament\Forms\Components\DateTimePicker;

  class PostForm
  {
      public static function configure(Schema $schema): Schema
      {
          return $schema
              ->components([
                  Section::make('Post Informatie')
                      ->schema([
                          // Blog (relatie, alleen-lezen)
                          TextInput::make('blog_id')
                              ->label('Blog')
                              ->disabled()
                              ->dehydrated(false)
                              ->formatStateUsing(fn ($record) => $record?->getBlogFromPost?->title ?? 'Onbekend'),

                          // Titel
                          TextInput::make('title')
                              ->label('Titel')
                              ->required()
                              ->maxLength(255),

                          // Inhoud / body
                          Textarea::make('body')
                              ->label('Inhoud')
                              ->rows(8),

                          // Afbeelding (upload; slaat pad op in image_url)
                          FileUpload::make('image_url')
                              ->label('Afbeelding')
                              ->image()
                              ->directory('posts')
                              ->maxSize(2048)
                              ->visibility('public'),

                          // Locatie velden
                          Select::make('continent')
                              ->label('Continent')
                              ->options([
                                  'africa' => 'Africa',
                                  'antarctica' => 'Antarctica',
                                  'asia' => 'Asia',
                                  'europe' => 'Europe',
                                  'north-america' => 'North America',
                                  'oceania' => 'Oceania',
                                  'south-america' => 'South America',
                              ])
                              ->placeholder('Kies continent')
                              ->searchable(),

                          TextInput::make('country_name')
                              ->label('Land')
                              ->maxLength(150),

                          TextInput::make('place_name')
                              ->label('Plaats')
                              ->maxLength(150),

                          // Categories: comma-gescheiden invoer (aanpasbaar naar TagsInput indien beschikbaar)
                          TextInput::make('categories')
                              ->label('Categorieën')
                              ->helperText('Commag gescheiden lijst van categorieën'),

                          // Statistieken (alleen-lezen, niet opgeslagen via formulier)
                          TextInput::make('total_likes')
                              ->label('Totaal likes')
                              ->disabled()
                              ->dehydrated(false)
                              ->formatStateUsing(fn ($state) => (int) ($state ?? 0)),

                          TextInput::make('total_views')
                              ->label('Totaal weergaven')
                              ->disabled()
                              ->dehydrated(false)
                              ->formatStateUsing(fn ($state) => (int) ($state ?? 0)),

                          TextInput::make('total_rating')
                              ->label('Gemiddelde beoordeling')
                              ->disabled()
                              ->dehydrated(false)
                              ->formatStateUsing(fn ($state) => $state !== null ? number_format($state, 2, ',', '.') : null),

                          // Aangemaakt op (alleen-lezen)
                          DateTimePicker::make('created_at')
                              ->label('Aangemaakt op')
                              ->disabled()
                              ->dehydrated(false)
                              ->formatStateUsing(fn ($state) => $state ? \Illuminate\Support\Carbon::parse($state)->format('d-m-Y H:i') : null),
                      ])
                      ->columns(2),
              ]);
      }
  }

usage:
  {"prompt_tokens":767,"completion_tokens":2111,"cache_write_input_tokens":0,"cache_read_input_tokens":0,"reasoning_tokens":1280}


id: 019d775b-3f1d-715e-9fca-528acf46889f
conversation_id: 019d7737-3fb2-7009-b80e-66dac560e3f6
user_id: D294954
agent: App\Ai\Agents\CustomAgent
role: user
attachments: []
tool_calls: []
tool_results: []
usage: []
meta: []
created_at: 2026-04-10 14:26:01
updated_at: 2026-04-10 14:26:01
content:
  nee helemaal niet want nu heb je de hoogte weg gehaal maar die was perfect maar ik wil dat je de lengte/breete heel de breedte pak dit is mijn code <Page x:Class="CareTracker.Pages.Verslag.VerslagOverzicht"
        xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
        xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
        xmlns:local="clr-namespace:CareTracker.Pages.Verslag"
        Width="800" Height="600">

      <Grid>
          <Grid.RowDefinitions>
              <RowDefinition Height="Auto"/>
              <!-- Header -->
              <RowDefinition Height="*"/>
              <!-- Content -->
          </Grid.RowDefinitions>

          <!-- Header -->
          <Grid Grid.Row="0" Background="#FF2D3E50">
              <StackPanel Orientation="Horizontal" HorizontalAlignment="Stretch" VerticalAlignment="Center" Padding="10">
                  <Button Content="Home" Margin="10,0" Click="HomeButton_Click"/>
                  <Button Content="Afsprakenoverzicht" Margin="10,0" Click="AppointmentsOverviewButton_Click"/>
                  <Button Content="Afspraken maken" Margin="10,0" Click="MakeAppointmentsButton_Click"/>
                  <Button Content="Profiel" Margin="10,0" Click="ProfileButton_Click"/>
                  <Button Content="Uitloggen" Margin="10,0" Click="LogoutButton_Click" HorizontalAlignment="Right"/>
              </StackPanel>
          </Grid>

          <!-- Content -->
          <Grid Grid.Row="1">
              <Grid.ColumnDefinitions>
                  <ColumnDefinition Width="2*"/>
                  <ColumnDefinition Width="3*"/>
              </Grid.ColumnDefinitions>

              <!-- Zoekbalk en patiëntenlijst -->
              <StackPanel Grid.Column="0" Margin="10">
                  <TextBox x:Name="SearchBox" Width="200" Height="30" Margin="0,0,0,10"/>
                  <ListView x:Name="PatientList" SelectionChanged="PatientList_SelectionChanged"/>
              </StackPanel>

              <!-- Verslagen van de geselecteerde patiënt en details -->
              <StackPanel Grid.Column="1" Margin="10">
                  <TextBlock Text="Selecteer een patiënt om verslagen te bekijken" FontWeight="Bold" Margin="0,0,0,10"/>
                  <ListView x:Name="ReportList" SelectionChanged="ReportList_SelectionChanged"/>
                  <TextBox x:Name="ReportDetails" Margin="0,10,0,0" Height="150" IsReadOnly="True" TextWrapping="Wrap"/>
              </StackPanel>
          </Grid>
      </Grid>
  </Page>


id: 019d775b-3f33-706a-a410-bad57be59dae
conversation_id: 019d7737-3fb2-7009-b80e-66dac560e3f6
user_id: D294954
agent: App\Ai\Agents\CustomAgent
role: assistant
attachments: []
tool_calls: []
tool_results: []
meta: {"provider":"openai","model":"gpt-4o","citations":[]}
created_at: 2026-04-10 14:26:01
updated_at: 2026-04-10 14:26:01
content:
  Laten we je header aanpassen zodat deze de volledige breedte gebruikt zonder de hoogte te beïnvloeden:

  ### VerslagOverzicht.xaml

  ```xml
  <Page x:Class="CareTracker.Pages.Verslag.VerslagOverzicht"
        xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
        xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
        xmlns:local="clr-namespace:CareTracker.Pages.Verslag"
        Width="800" Height="600">

      <Grid>
          <Grid.RowDefinitions>
              <RowDefinition Height="Auto"/> <!-- Header -->
              <RowDefinition Height="*"/> <!-- Content -->
          </Grid.RowDefinitions>

          <!-- Header -->
          <Grid Grid.Row="0" Background="#FF2D3E50" HorizontalAlignment="Stretch">
              <StackPanel Orientation="Horizontal" Padding="10">
                  <Button Content="Home" Margin="10,0" Click="HomeButton_Click"/>
                  <Button Content="Afsprakenoverzicht" Margin="10,0" Click="AppointmentsOverviewButton_Click"/>
                  <Button Content="Afspraken maken" Margin="10,0" Click="MakeAppointmentsButton_Click"/>
                  <Button Content="Profiel" Margin="10,0" Click="ProfileButton_Click"/>
                  <Button Content="Uitloggen" Margin="10,0" Click="LogoutButton_Click" HorizontalAlignment="Right"/>
              </StackPanel>
          </Grid>

          <!-- Content -->
          <Grid Grid.Row="1">
              <Grid.ColumnDefinitions>
                  <ColumnDefinition Width="2*"/>
                  <ColumnDefinition Width="3*"/>
              </Grid.ColumnDefinitions>

              <!-- Zoekbalk en patiëntenlijst -->
              <StackPanel Grid.Column="0" Margin="10">
                  <TextBox x:Name="SearchBox" Width="200" Height="30" Margin="0,0,0,10"/>
                  <ListView x:Name="PatientList" SelectionChanged="PatientList_SelectionChanged"/>
              </StackPanel>

              <!-- Verslagen van de geselecteerde patiënt en details -->
              <StackPanel Grid.Column="1" Margin="10">
                  <TextBlock Text="Selecteer een patiënt om verslagen te bekijken" FontWeight="Bold" Margin="0,0,0,10"/>
                  <ListView x:Name="ReportList" SelectionChanged="ReportList_SelectionChanged"/>
                  <TextBox x:Name="ReportDetails" Margin="0,10,0,0" Height="150" IsReadOnly="True" TextWrapping="Wrap"/>
              </StackPanel>
          </Grid>
      </Grid>
  </Page>
  ```

  ### Aanpassingen

  - **Grid**: We hebben `HorizontalAlignment="Stretch"` op het `Grid` voor de header gezet, zodat deze zich over de volledige breedte uitstrekt.
    
  - **StackPanel**: Bevat geen extra uitlijning, omdat het `Grid` al zorgt voor de volledige breedte.

  Als je nog steeds problemen hebt, controleer dan of je `MainWindow` of omringende container geen beperkingen heeft die de layout beïnvloeden. Probeer het en laat me weten hoe het werkt!

usage:
  {"prompt_tokens":19061,"completion_tokens":664,"cache_write_input_tokens":0,"cache_read_input_tokens":0,"reasoning_tokens":0}


id: 019d775b-6984-725c-b3ee-3974b8ec32c2
conversation_id: 019d7698-5b83-706e-9af1-f51d19cbfefc
user_id: i305304
agent: App\Ai\Agents\CustomAgent
role: user
attachments: []
tool_calls: []
tool_results: []
usage: []
meta: []
created_at: 2026-04-10 14:26:12
updated_at: 2026-04-10 14:26:12
content:
  i have images in resources/img folder in laravel how do I link it to make it appear in the seeder they're avatar_img.png for the user, blogpost.jpg for the post image and landscape.jpg for the blog image


id: 019d775b-699f-7326-84f4-40fe3e7226b6
conversation_id: 019d7698-5b83-706e-9af1-f51d19cbfefc
user_id: i305304
agent: App\Ai\Agents\CustomAgent
role: assistant
attachments: []
tool_calls: []
tool_results: []
meta: {"provider":"openai","model":"gpt-5","citations":[]}
created_at: 2026-04-10 14:26:12
updated_at: 2026-04-10 14:26:12
content:
  You can’t serve files directly from resources/img. Copy them to the public disk and point your factories to /storage/... paths. Then the seeded records will show those images.

  Steps:
  1) Create the public storage symlink (one-time)
  php artisan storage:link

  2) Copy your seed images from resources/img to storage/app/public/seed during seeding, then use those paths in factories.

  DatabaseSeeder.php
  ```php
  <?php

  namespace Database\Seeders;

  use App\Models\User;
  use Illuminate\Database\Seeder;
  use Illuminate\Support\Facades\Hash;
  use Illuminate\Support\Facades\Storage;

  class DatabaseSeeder extends Seeder
  {
      public function run(): void
      {
          $this->publishSeedImages();

          // Admin for Filament
          User::factory()->admin()->create([
              'username' => 'admin',
              'email'    => 'admin@example.com',
              'password' => Hash::make('password'),
          ]);

          // Readers first (so comments can belong to existing users)
          User::factory()->count(50)->reader()->create();

          // Bloggers (each gets a Blog + Posts + Comments via factory relations)
          User::factory()->count(10)->blogger()->create();
      }

      protected function publishSeedImages(): void
      {
          $map = [
              'seed/avatar_img.png'  => resource_path('img/avatar_img.png'),
              'seed/blogpost.jpg'    => resource_path('img/blogpost.jpg'),
              'seed/landscape.jpg'   => resource_path('img/landscape.jpg'),
          ];

          foreach ($map as $publicPath => $sourcePath) {
              if (! file_exists($sourcePath)) {
                  // Optional: warn if the source image is missing
                  continue;
              }
              if (! Storage::disk('public')->exists($publicPath)) {
                  Storage::disk('public')->put($publicPath, file_get_contents($sourcePath));
              }
          }
      }
  }
  ```

  Update your factories to use the copied files. The URLs will be accessible at /storage/seed/...

  database/factories/UserFactory.php
  ```php
  <?php

  namespace Database\Factories;

  use App\Models\User;
  use Database\Factories\BlogFactory;
  use Database\Factories\PostFactory;
  use Database\Factories\CommentFactory;
  use Illuminate\Database\Eloquent\Factories\Factory;
  use Illuminate\Support\Facades\Hash;

  class UserFactory extends Factory
  {
      protected $model = User::class;

      public function definition(): array
      {
          return [
              'username'      => fake()->unique()->userName(),
              'email'         => fake()->unique()->safeEmail(),
              'password'      => Hash::make('password'),
              'role'          => 'reader',
              'bio'           => fake()->optional()->paragraph(),
              'avatar_url'    => 'storage/seed/avatar_img.png', // points to public/storage/seed/avatar_img.png
              'full_name'     => fake()->name(),
              'address_line1' => fake()->streetAddress(),
              'city'          => fake()->city(),
          ];
      }

      public function admin(): static
      {
          return $this->state(fn () => ['role' => 'admin']);
      }

      public function reader(): static
      {
          return $this->state(fn () => ['role' => 'reader']);
      }

      public function blogger(): static
      {
          $postsCount = random_int(3, 7);
          $commentsPerPost = random_int(2, 10);

          return $this->state(fn () => ['role' => 'blogger'])
              ->has(
                  BlogFactory::new()
                      ->has(
                          PostFactory::new()
                              ->count($postsCount)
                              ->has(
                                  CommentFactory::new()->count($commentsPerPost),
                                  'getCommentsFromPost' // Post -> comments relation name
                              ),
                          'getPosts' // Blog -> posts relation name
                      ),
                  'getBlogFromUser' // User -> blog relation name
              );
      }
  }
  ```

  database/factories/BlogFactory.php
  ```php
  <?php

  namespace Database\Factories;

  use App\Models\Blog;
  use App\Models\User;
  use Illuminate\Database\Eloquent\Factories\Factory;

  class BlogFactory extends Factory
  {
      protected $model = Blog::class;

      public function definition(): array
      {
          return [
              'title'       => fake()->unique()->catchPhrase() . ' Travel Blog',
              'author_id'   => User::factory()->blogger(), // overridden by has(..., 'getBlogFromUser')
              'total_likes' => 0,
              'image_url'   => 'storage/seed/landscape.jpg',
          ];
      }
  }
  ```

  database/factories/PostFactory.php
  ```php
  <?php

  namespace Database\Factories;

  use App\Models\Blog;
  use App\Models\Post;
  use Illuminate\Database\Eloquent\Factories\Factory;

  class PostFactory extends Factory
  {
      protected $model = Post::class;

      public function definition(): array
      {
          $continents = ['Africa','Antarctica','Asia','Europe','North_America','Oceania','South_America'];
          $categories = ['adventure','culture','food','nature','tips','budget','luxury'];

          return [
              'blog_id'      => Blog::factory(), // overridden by has(..., 'getPosts')
              'title'        => fake()->sentence(6),
              'body'         => fake()->paragraphs(4, true),
              'image_url'    => 'storage/seed/blogpost.jpg',
              'continent'    => fake()->randomElement($continents),
              'country_name' => fake()->country(),
              'place_name'   => fake()->city(),
              'categories'   => fake()->randomElement($categories),
              'total_likes'  => fake()->numberBetween(0, 1000),
              'total_rating' => fake()->randomFloat(1, 0, 5),
              'total_views'  => fake()->numberBetween(0, 5000),
              'created_at'   => now()->subDays(fake()->numberBetween(0, 365)),
          ];
      }
  }
  ```

  Notes:
  - Make sure you ran php artisan storage:link so /storage maps to storage/app/public.
  - In views, you can render with:
    - <img src="{{ asset($user->avatar_url) }}" ...>
    - or if you stored the disk path (e.g., 'seed/avatar_img.png'), use Storage::url($path).

usage:
  {"prompt_tokens":23560,"completion_tokens":3537,"cache_write_input_tokens":0,"cache_read_input_tokens":0,"reasoning_tokens":2112}


id: 019d775b-6db4-7269-a613-8e69e76f5b91
conversation_id: 019d76fe-3b07-7095-acc1-ec6a2420f9f1
user_id: i301561
agent: App\Ai\Agents\CustomAgent
role: user
attachments: []
tool_calls: []
tool_results: []
usage: []
meta: []
created_at: 2026-04-10 14:26:13
updated_at: 2026-04-10 14:26:13
content:
  <?php

  namespace App\Filament\Auth;

  use Filament\Facades\Filament;
  use Illuminate\Support\Facades\Auth;
  use Illuminate\Http\RedirectResponse;
  use Filament\Auth\Http\Responses\Contracts\LoginResponse as LoginResponseContract;

  class Login extends LoginResponseContract
  {
      protected function handle(): RedirectResponse
      {
          $user = Auth::User();

          $panelId = $user->defaultPanelId();
          $url = Filament::getPanel($panelId)->getUrl();
          dump($url);
          return redirect($url);
      }
  }



  is het beter om dit script te gebruiken als login extender of middleware?


id: 019d775b-6dc7-7323-b0a1-a03940e68584
conversation_id: 019d76fe-3b07-7095-acc1-ec6a2420f9f1
user_id: i301561
agent: App\Ai\Agents\CustomAgent
role: assistant
attachments: []
tool_calls: []
tool_results: []
meta: {"provider":"openai","model":"gpt-5","citations":[]}
created_at: 2026-04-10 14:26:13
updated_at: 2026-04-10 14:26:13
content:
  ```php
  <?php
  /*
  Keuzehulp (in comments):
  - Alleen na inloggen redirecten? Gebruik een LoginResponse (of een custom Filament Auth\Login page).
    Voordeel: éénmalig na login, geen extra overhead op elke request.
  - Ook corrigeren als een ingelogde user handmatig naar het “verkeerde” panel navigeert (bookmark/URL)?
    Gebruik (ook) middleware die tijdens elke request checkt en zo nodig doorstuurt.
  - Beste praktijk: combineer beide.
    - LoginResponse voor de post-login bestemming.
    - Middleware om fout panel -> juist panel te corrigeren tijdens navigatie.
  */
  ```

  ```php
  <?php
  // CORRECTE manier 1: Custom LoginResponse implementeren + in container binden
  // app/Http/Responses/CustomLoginResponse.php

  namespace App\Http\Responses;

  use Illuminate\Http\RedirectResponse;
  use Livewire\Features\SupportRedirects\Redirector;
  use Filament\Http\Responses\Auth\Contracts\LoginResponse;

  class CustomLoginResponse implements LoginResponse
  {
      public function toResponse($request): RedirectResponse|Redirector
      {
          $user = auth()->user();

          // Veronderstelt dat je User::defaultPanelId() hebt
          $panelId = $user->defaultPanelId();

          // Aanrader: ga direct naar het dashboard van dat panel
          return redirect()->intended(route("filament.{$panelId}.pages.dashboard"));

          // Alternatief: naar de basis-URL van het panel
          // return redirect()->intended(\Filament\Facades\Filament::getPanel($panelId)->getUrl());
      }
  }
  ```

  ```php
  <?php
  // BIND de CustomLoginResponse in een service provider
  // app/Providers/FilamentResponseServiceProvider.php

  namespace App\Providers;

  use Illuminate\Support\ServiceProvider;
  use Filament\Http\Responses\Auth\Contracts\LoginResponse as LoginResponseContract;
  use App\Http\Responses\CustomLoginResponse;

  class FilamentResponseServiceProvider extends ServiceProvider
  {
      public function register(): void
      {
          $this->app->bind(LoginResponseContract::class, CustomLoginResponse::class);
      }
  }
  ```

  ```php
  <?php
  // config/app.php (uitsnede) - registreer de provider
  // ...
  'providers' => [
      // ...
      App\Providers\FilamentResponseServiceProvider::class,
  ],
  // ...
  ```

  ```php
  <?php
  // CORRECTE manier 2 (alternatief): Custom Filament Login page met getRedirectUrl()
  // app/Filament/Auth/Login.php

  namespace App\Filament\Auth;

  use Filament\Facades\Filament;
  use Filament\Pages\Auth\Login as BaseLogin;

  class Login extends BaseLogin
  {
      protected function getRedirectUrl(): string
      {
          $user = auth()->user();

          if ($user && method_exists($user, 'defaultPanelId')) {
              $panelId = $user->defaultPanelId();
              return route("filament.{$panelId}.pages.dashboard");
          }

          // Fallback: huidige panel
          return route('filament.' . Filament::getCurrentPanel()->getId() . '.pages.dashboard');
      }
  }
  ```

  ```php
  <?php
  // Registreer de custom Login page in je PanelProvider(s)
  // app/Providers/Filament/AdminPanelProvider.php (voorbeeld)

  namespace App\Providers\Filament;

  use App\Filament\Auth\Login;
  use Filament\Panel;
  use Filament\PanelProvider;
  use Filament\Http\Middleware\Authenticate;

  class AdminPanelProvider extends PanelProvider
  {
      public function panel(Panel $panel): Panel
      {
          return $panel
              ->id('admin')
              ->path('admin')
              ->login(Login::class) // <— registreer je custom login page
              ->authMiddleware([
                  Authenticate::class,
              ]);
      }
  }
  ```

  ```php
  <?php
  // Middleware om ingelogde users die het "verkeerde" panel bezoeken door te sturen
  // app/Http/Middleware/RedirectToUserPanel.php

  namespace App\Http\Middleware;

  use Closure;
  use Filament\Facades\Filament;

  class RedirectToUserPanel
  {
      public function handle($request, Closure $next)
      {
          $user = $request->user();

          if (! $user) {
              return $next($request);
          }

          $currentPanel = Filament::getCurrentPanel();
          $targetPanelId = method_exists($user, 'defaultPanelId') ? $user->defaultPanelId() : null;

          // Als user bijv. /admin bezoekt maar defaultPanelId 'reader' is, stuur door
          if ($currentPanel && $targetPanelId && $currentPanel->getId() !== $targetPanelId) {
              return redirect()->route("filament.{$targetPanelId}.pages.dashboard");
          }

          return $next($request);
      }
  }
  ```

  ```php
  <?php
  // Voeg de middleware toe aan ieder relevant PanelProvider (vóór Authenticate is prima)
  // app/Providers/Filament/ReaderPanelProvider.php (voorbeeld)

  namespace App\Providers\Filament;

  use App\Http\Middleware\RedirectToUserPanel;
  use Filament\Panel;
  use Filament\PanelProvider;
  use Filament\Http\Middleware\Authenticate;

  class ReaderPanelProvider extends PanelProvider
  {
      public function panel(Panel $panel): Panel
      {
          return $panel
              ->id('reader')
              ->path('reader')
              ->middleware([
                  RedirectToUserPanel::class, // <— voeg toe
              ])
              ->authMiddleware([
                  Authenticate::class,
              ]);
      }
  }
  ```

  ```php
  <?php
  // Belangrijke correcties n.a.v. je snippet (in comments):
  //
  // 1) Gebruik 'implements' i.p.v. 'extends' voor het LoginResponse contract:
  //    class CustomLoginResponse implements \Filament\Http\Responses\Auth\Contracts\LoginResponse { ... }
  //
  // 2) Methode-naam is toResponse($request), NIET handle().
  //
  // 3) Namespace van het contract is Filament\Http\Responses\Auth\Contracts\LoginResponse
  //    (niet Filament\Auth\Http\Responses\Contracts\LoginResponse).
  //
  // 4) Vermijd dump() in productie; gebruik redirect()->intended(route(...)) voor nette UX.
  //
  // 5) Als je per se Filament::getPanel($id)->getUrl() wilt gebruiken, kan dat,
  //    maar het is vaak duidelijker om naar een concrete pagina te sturen:
  //    route("filament.{$panelId}.pages.dashboard").
  //
  ```

usage:
  {"prompt_tokens":5823,"completion_tokens":2403,"cache_write_input_tokens":0,"cache_read_input_tokens":0,"reasoning_tokens":960}


id: 019d775b-864c-7272-8170-f5efacba1fe5
conversation_id: 019d775b-3b45-70b3-bf1c-995c7b7d18ff
user_id: i302573
agent: App\Ai\Agents\CustomAgent
role: assistant
attachments: []
tool_calls: []
tool_results: []
meta: {"provider":"openai","model":"gpt-5-mini","citations":[]}
created_at: 2026-04-10 14:26:20
updated_at: 2026-04-10 14:26:20
content:
  ```php
  <?php

  namespace App\Filament\Blogger\Resources\Posts\Schemas;

  use Filament\Schemas\Schema;
  use Filament\Forms\Components\TextInput;
  use Filament\Forms\Components\Textarea;
  use Filament\Forms\Components\Select;
  use Filament\Forms\Components\Section;
  use Filament\Forms\Components\FileUpload;
  use Filament\Forms\Components\DateTimePicker;

  class PostForm
  {
      public static function configure(Schema $schema): Schema
      {
          return $schema
              ->components([
                  Section::make('Post Informatie')
                      ->schema([
                          // Blog (relatie, alleen-lezen)
                          TextInput::make('blog_id')
                              ->label('Blog')
                              ->disabled()
                              ->dehydrated(false)
                              ->formatStateUsing(fn ($record) => $record?->getBlogFromPost?->title ?? 'Onbekend'),

                          // Titel
                          TextInput::make('title')
                              ->label('Titel')
                              ->required()
                              ->maxLength(255),

                          // Inhoud / body
                          Textarea::make('body')
                              ->label('Inhoud')
                              ->rows(8),

                          // Afbeelding (upload; slaat pad op in image_url)
                          FileUpload::make('image_url')
                              ->label('Afbeelding')
                              ->image()
                              ->directory('posts')
                              ->maxSize(2048)
                              ->visibility('public'),

                          // Locatie velden
                          Select::make('continent')
                              ->label('Continent')
                              ->options([
                                  'africa' => 'Africa',
                                  'antarctica' => 'Antarctica',
                                  'asia' => 'Asia',
                                  'europe' => 'Europe',
                                  'north-america' => 'North America',
                                  'oceania' => 'Oceania',
                                  'south-america' => 'South America',
                              ])
                              ->placeholder('Kies continent')
                              ->searchable(),

                          TextInput::make('country_name')
                              ->label('Land')
                              ->maxLength(150),

                          TextInput::make('place_name')
                              ->label('Plaats')
                              ->maxLength(150),

                          // Categories: comma-gescheiden invoer (aanpasbaar naar TagsInput indien beschikbaar)
                          TextInput::make('categories')
                              ->label('Categorieën')
                              ->helperText('Commag gescheiden lijst van categorieën'),

                          // Statistieken (alleen-lezen, niet opgeslagen via formulier)
                          TextInput::make('total_likes')
                              ->label('Totaal likes')
                              ->disabled()
                              ->dehydrated(false)
                              ->formatStateUsing(fn ($state) => (int) ($state ?? 0)),

                          TextInput::make('total_views')
                              ->label('Totaal weergaven')
                              ->disabled()
                              ->dehydrated(false)
                              ->formatStateUsing(fn ($state) => (int) ($state ?? 0)),

                          TextInput::make('total_rating')
                              ->label('Gemiddelde beoordeling')
                              ->disabled()
                              ->dehydrated(false)
                              ->formatStateUsing(fn ($state) => $state !== null ? number_format($state, 2, ',', '.') : null),

                          // Aangemaakt op (alleen-lezen)
                          DateTimePicker::make('created_at')
                              ->label('Aangemaakt op')
                              ->disabled()
                              ->dehydrated(false)
                              ->formatStateUsing(fn ($state) => $state ? \Illuminate\Support\Carbon::parse($state)->format('d-m-Y H:i') : null),
                      ])
                      ->columns(2),
              ]);
      }
  }
  ```

usage:
  {"prompt_tokens":1558,"completion_tokens":924,"cache_write_input_tokens":0,"cache_read_input_tokens":0,"reasoning_tokens":128}


id: 019d775c-870d-71d3-8527-dc9440644ad9
conversation_id: 019d7644-29d4-7190-a8ad-d8f1c60a7014
user_id: i293082
agent: App\Ai\Agents\CustomAgent
role: assistant
attachments: []
tool_calls: []
tool_results: []
meta: {"provider":"openai","model":"gpt-4o","citations":[]}
created_at: 2026-04-10 14:27:25
updated_at: 2026-04-10 14:27:25
content:
  Als je geen `MessageBox` gebruikt, kun je foutmeldingen en bevestigingen direct in de UI weergeven, bijvoorbeeld via een `TextBlock` of `Notification`. Hier is een aangepaste versie zonder `MessageBox`:

  ### XAML

  Zorg ervoor dat je een `TextBlock` hebt toegevoegd voor foutmeldingen:

  ```xml
  <TextBlock x:Name="ErrorTextBlock" Foreground="Red" Visibility="Collapsed" />
  ```

  ### C#

  Pas de methode aan om gebruik te maken van het `TextBlock`:

  ```csharp
  private void CreatePatientButton_Click(object sender, RoutedEventArgs e)
  {
      ErrorTextBlock.Visibility = Visibility.Collapsed;

      try
      {
          string firstName = FirstNameTextBox.Text.Trim();
          string lastName = LastNameTextBox.Text.Trim();
          DateTime? birthDate = BirthDatePicker.SelectedDate?.DateTime;
          string address = AddressTextBox.Text.Trim();
          string phoneNumber = PhoneNumberTextBox.Text.Trim();
          string email = EmailTextBox.Text.Trim();
          string gender = (GenderComboBox.SelectedItem as ComboBoxItem)?.Content?.ToString();
          string classificatie = (ClassificatieComboBox.SelectedItem as ComboBoxItem)?.Content.ToString();

          if (string.IsNullOrWhiteSpace(firstName) || string.IsNullOrWhiteSpace(lastName) || string.IsNullOrWhiteSpace(email) || !birthDate.HasValue || string.IsNullOrWhiteSpace(gender))
          {
              ErrorTextBlock.Text = "Vul alle verplichte velden in.";
              ErrorTextBlock.Visibility = Visibility.Visible;
              return;
          }

          using (var db = new AppDbContext())
          {
              var newPatient = new Patient
              {
                  FirstName = firstName,
                  LastName = lastName,
                  BirthDate = birthDate.Value,
                  Address = address,
                  PhoneNumber = phoneNumber,
                  Email = email,
                  Gender = gender
              };

              db.Patients.Add(newPatient);
              db.SaveChanges();
          }

          Frame.Navigate(typeof(PatientPage));
      }
      catch (Exception ex)
      {
          ErrorTextBlock.Text = $"Er is een fout opgetreden: {ex.Message}";
          ErrorTextBlock.Visibility = Visibility.Visible;
      }
  }
  ```

  ### Opmerkingen:
  - **ErrorTextBlock**: Zorg ervoor dat de `TextBlock` voor foutmeldingen in je UI aanwezig is.
  - **Foutmelding**: Pas de tekst en zichtbaarheid van de `ErrorTextBlock` aan wanneer nodig.

usage:
  {"prompt_tokens":145,"completion_tokens":529,"cache_write_input_tokens":0,"cache_read_input_tokens":8192,"reasoning_tokens":0}


id: 019d775d-1818-72df-94f8-a86efbbf2c1c
conversation_id: 019d7698-5b83-706e-9af1-f51d19cbfefc
user_id: i305304
agent: App\Ai\Agents\CustomAgent
role: assistant
attachments: []
tool_calls: []
tool_results: []
meta: {"provider":"openai","model":"gpt-5","citations":[]}
created_at: 2026-04-10 14:28:02
updated_at: 2026-04-10 14:28:02
content:
  Great—since they’re already in storage/app/public/seed, do this:

  1) Ensure the public URL works
  - Run once: php artisan storage:link
  - Then your files are publicly available at:
    - /storage/seed/avatar_img.png
    - /storage/seed/blogpost.jpg
    - /storage/seed/landscape.jpg

  2) Point your factories at those URLs

  database/factories/UserFactory.php
  ```php
  'avatar_url' => 'storage/seed/avatar_img.png',
  ```

  database/factories/BlogFactory.php
  ```php
  'image_url' => 'storage/seed/landscape.jpg',
  ```

  database/factories/PostFactory.php
  ```php
  'image_url' => 'storage/seed/blogpost.jpg',
  ```

  3) Use in Blade
  - If you stored the public path (as above), use:
  ```php
  <img src="{{ asset($user->avatar_url) }}" alt="Avatar">
  <img src="{{ asset($blog->image_url) }}" alt="Blog image">
  <img src="{{ asset($post->image_url) }}" alt="Post image">
  ```

  Alternative (if you prefer storing disk paths like 'seed/avatar_img.png'):
  - Store just 'seed/...' in DB and render with:
  ```php
  <img src="{{ Storage::url($user->avatar_url) }}" alt="Avatar">
  ```

  Quick sanity check in Tinker
  ```php
  Storage::disk('public')->exists('seed/avatar_img.png'); // true
  url('storage/seed/avatar_img.png'); // full URL
  ```

usage:
  {"prompt_tokens":1388,"completion_tokens":1063,"cache_write_input_tokens":0,"cache_read_input_tokens":23552,"reasoning_tokens":704}


id: 019d775d-5c09-7229-a6a7-b0cd9353cc55
conversation_id: 019d775b-3b45-70b3-bf1c-995c7b7d18ff
user_id: i302573
agent: App\Ai\Agents\CustomAgent
role: user
attachments: []
tool_calls: []
tool_results: []
usage: []
meta: []
created_at: 2026-04-10 14:28:20
updated_at: 2026-04-10 14:28:20
content:
  <?php

  namespace App\Filament\Blogger\Resources\Posts\Schemas;

  use Filament\Schemas\Schema;
  use Filament\Forms\Components\TextInput;
  use Filament\Forms\Components\Textarea;
  use Filament\Forms\Components\Select;
  use Filament\Forms\Components\Section;
  use Filament\Forms\Components\FileUpload;
  use Filament\Forms\Components\DateTimePicker;

  class PostForm
  {
      public static function configure(Schema $schema): Schema
      {

          return $schema
              ->components([
                          // Blog (relatie, alleen-lezen)
                          TextInput::make('blog_id')
                              ->label('Blog')
                              ->disabled()
                              ->dehydrated(false)
                              ->formatStateUsing(fn ($record) => $record?->getBlogFromPost?->title ?? 'Onbekend'),

                          // Titel
                          TextInput::make('title')
                              ->label('Titel')
                              ->required()
                              ->maxLength(255),

                          // Inhoud / body
                          Textarea::make('body')
                              ->label('Inhoud')
                              ->rows(8),

                          // Afbeelding (upload; slaat pad op in image_url)
                          FileUpload::make('image_url')
                              ->label('Afbeelding')
                              ->image()
                              ->directory('posts')
                              ->maxSize(2048)
                              ->visibility('public'),

                          // Locatie velden
                          Select::make('continent')
                              ->label('Continent')
                              ->options([
                                  'africa' => 'Africa',
                                  'antarctica' => 'Antarctica',
                                  'asia' => 'Asia',
                                  'europe' => 'Europe',
                                  'north-america' => 'North America',
                                  'oceania' => 'Oceania',
                                  'south-america' => 'South America',
                              ])
                              ->placeholder('Kies continent')
                              ->searchable(),

                          TextInput::make('country_name')
                              ->label('Land')
                              ->maxLength(150),

                          TextInput::make('place_name')
                              ->label('Plaats')
                              ->maxLength(150),

                          // Categories: comma-gescheiden invoer (aanpasbaar naar TagsInput indien beschikbaar)
                          TextInput::make('categories')
                              ->label('Categorieën')
                              ->helperText('Commag gescheiden lijst van categorieën'),

                          // Statistieken (alleen-lezen, niet opgeslagen via formulier)
                          TextInput::make('total_likes')
                              ->label('Totaal likes')
                              ->disabled()
                              ->dehydrated(false)
                              ->formatStateUsing(fn ($state) => (int) ($state ?? 0)),

                          TextInput::make('total_views')
                              ->label('Totaal weergaven')
                              ->disabled()
                              ->dehydrated(false)
                              ->formatStateUsing(fn ($state) => (int) ($state ?? 0)),

                          TextInput::make('total_rating')
                              ->label('Gemiddelde beoordeling')
                              ->disabled()
                              ->dehydrated(false)
                              ->formatStateUsing(fn ($state) => $state !== null ? number_format($state, 2, ',', '.') : null),

                          // Aangemaakt op (alleen-lezen)
                          DateTimePicker::make('created_at')
                              ->label('Aangemaakt op')
                              ->disabled()
                              ->dehydrated(false)
                              ->formatStateUsing(fn ($state) => $state ? \Illuminate\Support\Carbon::parse($state)->format('d-m-Y H:i') : null),
                      ])
  }
  }


  Fix this


id: 019d775d-5c1a-716f-8890-4807369bf83e
conversation_id: 019d775b-3b45-70b3-bf1c-995c7b7d18ff
user_id: i302573
agent: App\Ai\Agents\CustomAgent
role: assistant
attachments: []
tool_calls: []
tool_results: []
meta: {"provider":"openai","model":"gpt-5-mini","citations":[]}
created_at: 2026-04-10 14:28:20
updated_at: 2026-04-10 14:28:20
content:
  ```php
  <?php

  namespace App\Filament\Blogger\Resources\Posts\Schemas;

  use Filament\Schemas\Schema;
  use Filament\Forms\Components\TextInput;
  use Filament\Forms\Components\Textarea;
  use Filament\Forms\Components\Select;
  use Filament\Forms\Components\Section;
  use Filament\Forms\Components\FileUpload;
  use Filament\Forms\Components\DateTimePicker;

  class PostForm
  {
      public static function configure(Schema $schema): Schema
      {
          return $schema
              ->components([
                  Section::make('Post Informatie')
                      ->schema([
                          // Blog (relatie, alleen-lezen)
                          TextInput::make('blog_id')
                              ->label('Blog')
                              ->disabled()
                              ->dehydrated(false)
                              ->formatStateUsing(fn ($record) => $record?->getBlogFromPost?->title ?? 'Onbekend'),

                          // Titel
                          TextInput::make('title')
                              ->label('Titel')
                              ->required()
                              ->maxLength(255),

                          // Inhoud / body
                          Textarea::make('body')
                              ->label('Inhoud')
                              ->rows(8),

                          // Afbeelding (upload; slaat pad op in image_url)
                          FileUpload::make('image_url')
                              ->label('Afbeelding')
                              ->image()
                              ->directory('posts')
                              ->maxSize(2048)
                              ->visibility('public'),

                          // Locatie velden
                          Select::make('continent')
                              ->label('Continent')
                              ->options([
                                  'africa' => 'Africa',
                                  'antarctica' => 'Antarctica',
                                  'asia' => 'Asia',
                                  'europe' => 'Europe',
                                  'north-america' => 'North America',
                                  'oceania' => 'Oceania',
                                  'south-america' => 'South America',
                              ])
                              ->placeholder('Kies continent')
                              ->searchable(),

                          TextInput::make('country_name')
                              ->label('Land')
                              ->maxLength(150),

                          TextInput::make('place_name')
                              ->label('Plaats')
                              ->maxLength(150),

                          // Categories: comma-gescheiden invoer (aanpasbaar naar TagsInput indien beschikbaar)
                          TextInput::make('categories')
                              ->label('Categorieën')
                              ->helperText('Commag gescheiden lijst van categorieën'),

                          // Statistieken (alleen-lezen, niet opgeslagen via formulier)
                          TextInput::make('total_likes')
                              ->label('Totaal likes')
                              ->disabled()
                              ->dehydrated(false)
                              ->formatStateUsing(fn ($state) => (int) ($state ?? 0)),

                          TextInput::make('total_views')
                              ->label('Totaal weergaven')
                              ->disabled()
                              ->dehydrated(false)
                              ->formatStateUsing(fn ($state) => (int) ($state ?? 0)),

                          TextInput::make('total_rating')
                              ->label('Gemiddelde beoordeling')
                              ->disabled()
                              ->dehydrated(false)
                              ->formatStateUsing(fn ($state) => $state !== null ? number_format($state, 2, ',', '.') : null),

                          // Aangemaakt op (alleen-lezen)
                          DateTimePicker::make('created_at')
                              ->label('Aangemaakt op')
                              ->disabled()
                              ->dehydrated(false)
                              ->formatStateUsing(fn ($state) => $state ? \Illuminate\Support\Carbon::parse($state)->format('d-m-Y H:i') : null),
                      ])
                      ->columns(2),
              ]);
      }
  }
  ```

usage:
  {"prompt_tokens":3098,"completion_tokens":1064,"cache_write_input_tokens":0,"cache_read_input_tokens":0,"reasoning_tokens":256}


id: 019d775d-794a-7360-a5e3-d3edc84ec6af
conversation_id: 019d7737-3fb2-7009-b80e-66dac560e3f6
user_id: D294954
agent: App\Ai\Agents\CustomAgent
role: assistant
attachments: []
tool_calls: []
tool_results: []
meta: {"provider":"openai","model":"gpt-4o","citations":[]}
created_at: 2026-04-10 14:28:27
updated_at: 2026-04-10 14:28:27
content:
  Natuurlijk, laten we ervoor zorgen dat de header de volledige breedte van het scherm vult door de `StackPanel` en `Grid` correct in te stellen:

  ### VerslagOverzicht.xaml

  ```xml
  <Page x:Class="CareTracker.Pages.Verslag.VerslagOverzicht"
        xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
        xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
        xmlns:local="clr-namespace:CareTracker.Pages.Verslag"
        Width="800" Height="600">

      <Grid>
          <Grid.RowDefinitions>
              <RowDefinition Height="Auto"/> <!-- Header -->
              <RowDefinition Height="*"/> <!-- Content -->
          </Grid.RowDefinitions>

          <!-- Header -->
          <StackPanel Grid.Row="0" Orientation="Horizontal" Background="#FF2D3E50" HorizontalAlignment="Stretch" VerticalAlignment="Top">
              <Button Content="Home" Margin="10,0" Click="HomeButton_Click"/>
              <Button Content="Afsprakenoverzicht" Margin="10,0" Click="AppointmentsOverviewButton_Click"/>
              <Button Content="Afspraken maken" Margin="10,0" Click="MakeAppointmentsButton_Click"/>
              <Button Content="Profiel" Margin="10,0" Click="ProfileButton_Click"/>
              <Button Content="Uitloggen" Margin="10,0" Click="LogoutButton_Click" HorizontalAlignment="Right"/>
          </StackPanel>

          <!-- Content -->
          <Grid Grid.Row="1">
              <Grid.ColumnDefinitions>
                  <ColumnDefinition Width="2*"/>
                  <ColumnDefinition Width="3*"/>
              </Grid.ColumnDefinitions>

              <!-- Zoekbalk en patiëntenlijst -->
              <StackPanel Grid.Column="0" Margin="10">
                  <TextBox x:Name="SearchBox" Width="200" Height="30" Margin="0,0,0,10"/>
                  <ListView x:Name="PatientList" SelectionChanged="PatientList_SelectionChanged"/>
              </StackPanel>

              <!-- Verslagen van de geselecteerde patiënt en details -->
              <StackPanel Grid.Column="1" Margin="10">
                  <TextBlock Text="Selecteer een patiënt om verslagen te bekijken" FontWeight="Bold" Margin="0,0,0,10"/>
                  <ListView x:Name="ReportList" SelectionChanged="ReportList_SelectionChanged"/>
                  <TextBox x:Name="ReportDetails" Margin="0,10,0,0" Height="150" IsReadOnly="True" TextWrapping="Wrap"/>
              </StackPanel>
          </Grid>
      </Grid>
  </Page>
  ```

  ### Aanpassingen

  - **StackPanel in Grid**: Door het `StackPanel` direct in het `Grid` als header te plaatsen met `HorizontalAlignment="Stretch"`, zal het automatisch de volledige breedte gebruik maken.
    
  - **VerticalAlignment="Top"**: Zorg ervoor dat de header geen marges heeft die deze naar het midden drukken.

  Controleer ook of er geen omringende stijlen of parent-containers zijn die de layout beperken. Probeer het zo uit, en ik hoor graag of dit naar wens werkt!

usage:
  {"prompt_tokens":19750,"completion_tokens":671,"cache_write_input_tokens":0,"cache_read_input_tokens":0,"reasoning_tokens":0}


id: 019d775e-f037-734c-8118-58697b714442
conversation_id: 019d775e-f012-71eb-8c6e-bcc10c315a91
user_id: i293082
agent: App\Ai\Agents\CustomAgent
role: user
attachments: []
tool_calls: []
tool_results: []
usage: []
meta: []
created_at: 2026-04-10 14:30:03
updated_at: 2026-04-10 14:30:03
content:
  Als ik een patient aanmaak en ik klik op de opslaan knop dan add hij hem niet in mijn database.. using CareTracker.Data;
  using CareTracker.Pages.Login;
  using Microsoft.UI.Xaml;
  using Microsoft.UI.Xaml.Controls;
  using Microsoft.UI.Xaml.Controls.Primitives;
  using Microsoft.UI.Xaml.Data;
  using Microsoft.UI.Xaml.Input;
  using Microsoft.UI.Xaml.Media;
  using Microsoft.UI.Xaml.Navigation;
  using System;
  using System.Collections.Generic;
  using System.IO;
  using System.Linq;
  using System.Runtime.InteropServices.WindowsRuntime;
  using Windows.Foundation;
  using Windows.Foundation.Collections;

  // To learn more about WinUI, the WinUI project structure,
  // and more about our project templates, see: http://aka.ms/winui-project-info.

  namespace CareTracker.Pages.Patient
  {
      /// <summary>
      /// An empty page that can be used on its own or navigated to within a Frame.
      /// </summary>
      public sealed partial class PatientAanmaken : Page
      {
          public PatientAanmaken()
          {
              InitializeComponent();
          }

          private void HomeButton_Click(object sender, RoutedEventArgs e)
          {
              // Implement navigation to the home page
          }

          private void AppointmentsOverviewButton_Click(object sender, RoutedEventArgs e)
          {
              // Implement navigation to the appointments overview page
          }

          private void MakeAppointmentsButton_Click(object sender, RoutedEventArgs e)
          {
              // Implement navigation to the make appointments page
          }

          private void ProfileButton_Click(object sender, RoutedEventArgs e)
          {
              // Implement navigation to the profile page
          }

          private void LogoutButton_Click(object sender, RoutedEventArgs e)
          {
              LoggedInUser.CurrentUser = null;
              Frame.Navigate(typeof(LoginPage));
          }

          private void CreatePatientButton_Click(object sender, RoutedEventArgs e)
          {
              try
              {
                  string firstName = FirstNameTextBox.Text.Trim();
                  string lastName = LastNameTextBox.Text.Trim();
                  DateTime? birthDate = BirthDatePicker.SelectedDate?.DateTime;
                  string address = AddressTextBox.Text.Trim();
                  string phoneNumber = PhoneNumberTextBox.Text.Trim();
                  string email = EmailTextBox.Text.Trim();
                  string classificatie = (ClassificatieComboBox.SelectedItem as ComboBoxItem)?.Content.ToString();

                  if (string.IsNullOrWhiteSpace(firstName) || string.IsNullOrWhiteSpace(lastName) || string.IsNullOrWhiteSpace(email) || !birthDate.HasValue || string.IsNullOrWhiteSpace(gender))
                  {
                      return;
                  }

                  using var db = new AppDbContext();
                  {
                      var newPatient = new Data.Patient
                      {
                          FirstName = firstName,
                          LastName = lastName,
                          BirthDate = birthDate.Value,
                          Address = address,
                          PhoneNumber = phoneNumber,
                          Email = email
                      };


                      db.Patients.Add(newPatient);
                      db.SaveChanges();
                  }
                  Frame.Navigate(typeof(PatientPage));
              }
             
        
      }
  }


id: 019d775e-f058-7357-9c3c-b6cd3e4d4944
conversation_id: 019d775e-f012-71eb-8c6e-bcc10c315a91
user_id: i293082
agent: App\Ai\Agents\CustomAgent
role: assistant
attachments: []
tool_calls: []
tool_results: []
meta: {"provider":"openai","model":"gpt-4o","citations":[]}
created_at: 2026-04-10 14:30:03
updated_at: 2026-04-10 14:30:03
content:
  Zeker! Hier zijn een paar stappen die je kunt ondernemen om te onderzoeken waarom de patiënt niet aan de database wordt toegevoegd:

  1. **Controleer of de verbindingsstring juist is**:
     Zorg ervoor dat de databaseverbindingsstring correct is geconfigureerd in je `AppDbContext`. Als de verbindingsstring niet goed is, kan de database niet worden aangesproken.

  2. **Controleer op fouten of uitzonderingen**:
     Voeg foutafhandeling toe rond de database-operaties om te controleren of er uitzonderingen optreden die je niet opmerkt.
     
     ```csharp
     try
     {
         using var db = new AppDbContext();
         var newPatient = new Data.Patient
         {
             FirstName = firstName,
             LastName = lastName,
             BirthDate = birthDate.Value,
             Address = address,
             PhoneNumber = phoneNumber,
             Email = email
         };

         db.Patients.Add(newPatient);
         db.SaveChanges();
         Frame.Navigate(typeof(PatientPage));
     }
     catch (Exception ex)
     {
         // Log het probleem of toon een bericht aan de gebruiker
         Debug.WriteLine("Er is een fout opgetreden: " + ex.Message);
     }
     ```

  3. **Database schema controleren**:
     Controleer of de tabel “Patients” daadwerkelijk bestaat in de database en of het schema overeenkomt met de klassedefinitie van `Data.Patient`.

  4. **Check of de context correct is geconfigureerd**:
     Zorg ervoor dat `AppDbContext` correct is geconfigureerd en dat het de juiste DbSet bevat:
     
     ```csharp
     public class AppDbContext : DbContext
     {
         public DbSet<Data.Patient> Patients { get; set; }

         // Override OnConfiguring om connection string te definieren
         protected override void OnConfiguring(DbContextOptionsBuilder optionsBuilder)
         {
             optionsBuilder.UseSqlite("your_connection_string_here");
         }
     }
     ```

  5. **Debuggen**:
     Gebruik de debugger om te controleren of alle waarden correct worden doorgegeven en of de databaseoperaties zoals verwacht worden uitgevoerd.

  6. **Controleer Classificatie en Geslacht**:
     In jouw code ontbreekt een check voor de variable `gender`, maar deze wordt wel genoemd. Zorg dat alle benodigde velden correct zijn en dat `ClassificatieComboBox.SelectedItem` en `Gender` worden gecontroleerd en geplaatst als nodig.

  Volg deze stappen en je zou veel beter moeten kunnen begrijpen waar het misgaat bij het opslaan van de patiënt.

usage:
  {"prompt_tokens":645,"completion_tokens":532,"cache_write_input_tokens":0,"cache_read_input_tokens":0,"reasoning_tokens":0}


id: 019d775f-20ee-7099-8cec-7063aea00be7
conversation_id: 019d76cd-7b52-7080-a92e-7c77be22a631
user_id: D300800
agent: App\Ai\Agents\CustomAgent
role: assistant
attachments: []
tool_calls: []
tool_results: []
meta: {"provider":"openai","model":"gpt-5-mini","citations":[]}
created_at: 2026-04-10 14:30:16
updated_at: 2026-04-10 14:30:16
content:
  Je mist het hekje en (bij voorkeur) de alfa-waarde. Gebruik bijvoorbeeld één van deze:

  Inline kleur (met volledige ARGB-hex):
  <TextBlock x:Name="WelcomeText" FontSize="22" Text="Welkom!" Foreground="#FF42D7D7"/>

  Kortere RGB-variant (alpha wordt dan automatisch op FF gezet):
  <TextBlock x:Name="WelcomeText" FontSize="22" Text="Welkom!" Foreground="#42D7D7"/>

  Of, als je een eerder gedefinieerde brush wilt hergebruiken (aanbevolen voor consistentie):
  <TextBlock x:Name="WelcomeText" FontSize="22" Text="Welkom!" Foreground="{StaticResource Teal1Brush}"/>

  Werking: Foreground verwacht een Brush; een hex-string moet met '#' beginnen (en het is goed om de alpha-waarde FF toe te voegen).

usage:
  {"prompt_tokens":3402,"completion_tokens":615,"cache_write_input_tokens":0,"cache_read_input_tokens":0,"reasoning_tokens":384}


id: 019d775f-6a75-7221-b628-77ff0310f919
conversation_id: 019d775b-3b45-70b3-bf1c-995c7b7d18ff
user_id: i302573
agent: App\Ai\Agents\CustomAgent
role: assistant
attachments: []
tool_calls: []
tool_results: []
meta: {"provider":"openai","model":"gpt-5-mini","citations":[]}
created_at: 2026-04-10 14:30:35
updated_at: 2026-04-10 14:30:35
content:
  ```php
  <?php

  namespace App\Filament\Blogger\Resources\Posts\Schemas;

  use Filament\Schemas\Schema;
  use Filament\Forms\Components\TextInput;
  use Filament\Forms\Components\Textarea;
  use Filament\Forms\Components\Select;
  use Filament\Forms\Components\FileUpload;
  use Filament\Forms\Components\DateTimePicker;

  class PostForm
  {
      public static function configure(Schema $schema): Schema
      {
          return $schema
              ->components([
                  // Blog (relatie, alleen-lezen)
                  TextInput::make('blog_id')
                      ->label('Blog')
                      ->disabled()
                      ->dehydrated(false)
                      ->formatStateUsing(fn ($record) => $record?->getBlogFromPost?->title ?? 'Onbekend'),

                  // Titel
                  TextInput::make('title')
                      ->label('Titel')
                      ->required()
                      ->maxLength(255),

                  // Inhoud / body
                  Textarea::make('body')
                      ->label('Inhoud')
                      ->rows(8),

                  // Afbeelding (upload; slaat pad op in image_url)
                  FileUpload::make('image_url')
                      ->label('Afbeelding')
                      ->image()
                      ->directory('posts')
                      ->maxSize(2048)
                      ->visibility('public'),

                  // Locatie velden
                  Select::make('continent')
                      ->label('Continent')
                      ->options([
                          'africa' => 'Africa',
                          'antarctica' => 'Antarctica',
                          'asia' => 'Asia',
                          'europe' => 'Europe',
                          'north-america' => 'North America',
                          'oceania' => 'Oceania',
                          'south-america' => 'South America',
                      ])
                      ->placeholder('Kies continent')
                      ->searchable(),

                  TextInput::make('country_name')
                      ->label('Land')
                      ->maxLength(150),

                  TextInput::make('place_name')
                      ->label('Plaats')
                      ->maxLength(150),

                  // Categories: comma-gescheiden invoer (aanpasbaar naar TagsInput indien beschikbaar)
                  TextInput::make('categories')
                      ->label('Categorieën')
                      ->helperText('Commag gescheiden lijst van categorieën'),

                  // Statistieken (alleen-lezen, niet opgeslagen via formulier)
                  TextInput::make('total_likes')
                      ->label('Totaal likes')
                      ->disabled()
                      ->dehydrated(false)
                      ->formatStateUsing(fn ($state) => (int) ($state ?? 0)),

                  TextInput::make('total_views')
                      ->label('Totaal weergaven')
                      ->disabled()
                      ->dehydrated(false)
                      ->formatStateUsing(fn ($state) => (int) ($state ?? 0)),

                  TextInput::make('total_rating')
                      ->label('Gemiddelde beoordeling')
                      ->disabled()
                      ->dehydrated(false)
                      ->formatStateUsing(fn ($state) => $state !== null ? number_format($state, 2, ',', '.') : null),

                  // Aangemaakt op (alleen-lezen)
                  DateTimePicker::make('created_at')
                      ->label('Aangemaakt op')
                      ->disabled()
                      ->dehydrated(false)
                      ->formatStateUsing(fn ($state) => $state ? \Illuminate\Support\Carbon::parse($state)->format('d-m-Y H:i') : null),
              ]);
      }
  }
  ```

usage:
  {"prompt_tokens":1073,"completion_tokens":1048,"cache_write_input_tokens":0,"cache_read_input_tokens":2816,"reasoning_tokens":256}


id: 019d775f-86df-72d0-ba88-73b15b3e0cad
conversation_id: 019d76cd-7b52-7080-a92e-7c77be22a631
user_id: D300800
agent: App\Ai\Agents\CustomAgent
role: assistant
attachments: []
tool_calls: []
tool_results: []
meta: {"provider":"openai","model":"gpt-5-mini","citations":[]}
created_at: 2026-04-10 14:30:42
updated_at: 2026-04-10 14:30:42
content:
  Ja—hier zijn een paar correcte opties. Aanbevolen: gebruik de eerder gedefinieerde brush voor consistentie:

  1) Gebruik de resource (aanbevolen)
  <TextBlock x:Name="WelcomeText" FontSize="22" Text="Welkom!" Foreground="{StaticResource Teal1Brush"}"/>

  2) Directe hexkleur met alpha (volledig ARGB)
  <TextBlock x:Name="WelcomeText" FontSize="22" Text="Welkom!" Foreground="#FF42D7D7"/>

  3) Kortere RGB-variant (alpha wordt dan FF)
  <TextBlock x:Name="WelcomeText" FontSize="22" Text="Welkom!" Foreground="#42D7D7"/>

  Gebruik optie 1 voor consistentie in je app.

usage:
  {"prompt_tokens":790,"completion_tokens":419,"cache_write_input_tokens":0,"cache_read_input_tokens":2816,"reasoning_tokens":192}


id: 019d7760-825a-7314-bc19-f55df4c30e28
conversation_id: 019d775e-f012-71eb-8c6e-bcc10c315a91
user_id: i293082
agent: App\Ai\Agents\CustomAgent
role: assistant
attachments: []
tool_calls: []
tool_results: []
meta: {"provider":"openai","model":"gpt-4o","citations":[]}
created_at: 2026-04-10 14:31:46
updated_at: 2026-04-10 14:31:46
content:
  Natuurlijk, hier is een mogelijke geïmplementeerde versie van de code met extra foutafhandeling en controles:

  ```csharp
  using CareTracker.Data;
  using CareTracker.Pages.Login;
  using Microsoft.UI.Xaml;
  using Microsoft.UI.Xaml.Controls;
  using System;
  using System.Diagnostics;

  namespace CareTracker.Pages.Patient
  {
      public sealed partial class PatientAanmaken : Page
      {
          public PatientAanmaken()
          {
              InitializeComponent();
          }

          private void HomeButton_Click(object sender, RoutedEventArgs e)
          {
              // Implement navigation to the home page
          }

          private void AppointmentsOverviewButton_Click(object sender, RoutedEventArgs e)
          {
              // Implement navigation to the appointments overview page
          }

          private void MakeAppointmentsButton_Click(object sender, RoutedEventArgs e)
          {
              // Implement navigation to the make appointments page
          }

          private void ProfileButton_Click(object sender, RoutedEventArgs e)
          {
              // Implement navigation to the profile page
          }

          private void LogoutButton_Click(object sender, RoutedEventArgs e)
          {
              LoggedInUser.CurrentUser = null;
              Frame.Navigate(typeof(LoginPage));
          }

          private void CreatePatientButton_Click(object sender, RoutedEventArgs e)
          {
              try
              {
                  string firstName = FirstNameTextBox.Text.Trim();
                  string lastName = LastNameTextBox.Text.Trim();
                  DateTime? birthDate = BirthDatePicker.SelectedDate?.DateTime;
                  string address = AddressTextBox.Text.Trim();
                  string phoneNumber = PhoneNumberTextBox.Text.Trim();
                  string email = EmailTextBox.Text.Trim();
                  string classificatie = (ClassificatieComboBox.SelectedItem as ComboBoxItem)?.Content.ToString();

                  // Controleer of alle velden correct gevuld zijn
                  if (string.IsNullOrWhiteSpace(firstName) || string.IsNullOrWhiteSpace(lastName) || 
                      string.IsNullOrWhiteSpace(email) || !birthDate.HasValue)
                  {
                      // Toon een foutmelding dat alle velden ingevuld moeten zijn
                      Debug.WriteLine("Alle verplichte velden moeten ingevuld zijn.");
                      return;
                  }

                  using var db = new AppDbContext();
                  var newPatient = new Data.Patient
                  {
                      FirstName = firstName,
                      LastName = lastName,
                      BirthDate = birthDate.Value,
                      Address = address,
                      PhoneNumber = phoneNumber,
                      Email = email
                  };

                  db.Patients.Add(newPatient);
                  db.SaveChanges();
                  
                  // Navigeren naar de nieuwe pagina als de patiënt is aangemaakt
                  Frame.Navigate(typeof(PatientPage));
              }
              catch (Exception ex)
              {
                  // Loggen van de fout of een bericht tonen aan de gebruiker
                  Debug.WriteLine("Er is een fout opgetreden: " + ex.Message);
              }
          }
      }
  }
  ```

  Vergeet ook niet de `AppDbContext` correct te configureren:

  ```csharp
  using Microsoft.EntityFrameworkCore;

  namespace CareTracker.Data
  {
      public class AppDbContext : DbContext
      {
          public DbSet<Patient> Patients { get; set; }

          protected override void OnConfiguring(DbContextOptionsBuilder optionsBuilder)
          {
              optionsBuilder.UseSqlite("Data Source=caretracker.db");
          }

          // Optional: Configure other parameters or relationships
      }
  }

  public class Patient
  {
      public int Id { get; set; }
      public string FirstName { get; set; }
      public string LastName { get; set; }
      public DateTime BirthDate { get; set; }
      public string Address { get; set; }
      public string PhoneNumber { get; set; }
      public string Email { get; set; }
      // Voeg andere benodigde velden toe
  }
  ```

  Zorg dat je de juiste verbinden string gebruikt voor jouw databasedatabase en dat deze goed is aangemaakt. Controleer ook op eventuele ontbrekende velden in de definities.

usage:
  {"prompt_tokens":1188,"completion_tokens":829,"cache_write_input_tokens":0,"cache_read_input_tokens":0,"reasoning_tokens":0}


id: 019d7761-8955-72fd-a238-b772ab25d845
conversation_id: 019d775e-f012-71eb-8c6e-bcc10c315a91
user_id: i293082
agent: App\Ai\Agents\CustomAgent
role: user
attachments: []
tool_calls: []
tool_results: []
usage: []
meta: []
created_at: 2026-04-10 14:32:54
updated_at: 2026-04-10 14:32:54
content:
  <?xml version="1.0" encoding="utf-8"?>
  <Page
      x:Class="CareTracker.Pages.Patient.PatientAanmaken"
      xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
      xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
      xmlns:local="using:CareTracker.Pages.Patient"
      xmlns:d="http://schemas.microsoft.com/expression/blend/2008"
      xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006"
      mc:Ignorable="d">
      <Grid>
          <Grid.RowDefinitions>
              <RowDefinition Height="Auto"/>
              <!-- Header -->
              <RowDefinition Height="*"/>
              <!-- Content -->
          </Grid.RowDefinitions>

          <!-- Header -->
          <StackPanel Orientation="Horizontal"
                      Grid.Row="0"
                      Background="#FF2D3E50"
                      Padding="10">

              <Button Content="Home"
                      Margin="10,0"
                      Click="HomeButton_Click"
                      Style="{StaticResource HeaderButtonStyle}"/>

              <Button Content="Afsprakenoverzicht"
                      Margin="10,0"
                      Click="AppointmentsOverviewButton_Click"
                      Style="{StaticResource HeaderButtonStyle}"/>

              <Button Content="Afspraken maken"
                      Margin="10,0"
                      Click="MakeAppointmentsButton_Click"
                      Style="{StaticResource HeaderButtonStyle}"/>

              <Button Content="Profiel"
                      Margin="10,0"
                      Click="ProfileButton_Click"
                      Style="{StaticResource HeaderButtonStyle}"/>

              <Button Content="Uitloggen"
                      Margin="10,0"
                      Click="LogoutButton_Click"
                      Style="{StaticResource HeaderButtonStyle}"
                      HorizontalAlignment="Right"/>
          </StackPanel>

          <!-- Add other content here -->
          <Grid Grid.Row="1">
              <!-- Place page content here -->
              <ScrollView>
                  <StackPanel x:Name="PatientFormPanel" Visibility="Visible" Spacing="8" Padding="20" Background="White" Margin="30" CornerRadius="10">
                  <TextBlock Text="Voornaam patient:"/>
                  <TextBox x:Name="FirstNameTextBox" PlaceholderText="Voornaam"/>

                  <TextBlock Text="Achternaam patient:"/>
                  <TextBox x:Name="LastNameTextBox" PlaceholderText="Achternaam"/>

                  <TextBlock Text="Geboortedatum patient:"/>
                  <DatePicker x:Name="BirthDatePicker"/>

                  <TextBlock Text="Adres patient:"/>
                  <TextBox x:Name="AddressTextBox" PlaceholderText="Adres"/>

                  <TextBlock Text="Telefoonnummer patient:"/>
                  <TextBox x:Name="PhoneNumberTextBox" PlaceholderText="Telefoonnummer"/>

                  <TextBlock Text="E-mailadres patient:"/>
                  <TextBox x:Name="EmailTextBox" PlaceholderText="E-mailadres"/>

                  <TextBlock Text="Medische geschiedenis patient:"/>
                  <TeachingTip x:Name="MedicalHistoryTip" Target="{Binding ElementName=MedicalHistoryTextBox}" Title="Medische geschiedenis" Subtitle="Vul hier de medische geschiedenis van de patient in." IsOpen="False"/>

                  <TextBlock Text="Classificatie"/>
                  <ComboBox x:Name="ClassificatieComboBox" Width="150">
                      <ComboBoxItem Content="Doorverwijzing therapeut"/>
                      <ComboBoxItem Content="Doorverwijzing spoed ziekenhuis"/>
                      <ComboBoxItem Content="Medicijnen voorgeschreven"/>
                      <ComboBoxItem Content="Routine check-up"/>
                      <ComboBoxItem Content="Diagnose voorgesteld"/>
                      <ComboBoxItem Content="Vaccinatie"/>
                      <ComboBoxItem Content="(kleine) operatie/handeling"/>
                      <ComboBoxItem Content="Bloed prikken"/>
                      <ComboBoxItem Content="Allergie onderzoek"/>
                  </ComboBox>

                  <TextBlock x:Name="ErrorTextBlock" Foreground="Red" Visibility="Collapsed" />

                      <Button x:Name="SaveButton" Content="Opslaan" Click="SaveButton_Click"  HorizontalAlignment="Left" Margin="0,20,0,0"/>
              </StackPanel>
              </ScrollView>
          </Grid>

          
          
      </Grid>
  </Page>


id: 019d7761-8966-73c4-8f85-6780238c39d8
conversation_id: 019d775e-f012-71eb-8c6e-bcc10c315a91
user_id: i293082
agent: App\Ai\Agents\CustomAgent
role: assistant
attachments: []
tool_calls: []
tool_results: []
meta: {"provider":"openai","model":"gpt-4o","citations":[]}
created_at: 2026-04-10 14:32:54
updated_at: 2026-04-10 14:32:54
content:
  Laten we je code controleren en ervoor zorgen dat alles correct is ingesteld.

  ### Codecontrolepunten:

  1. **Bindings controleren**:
     - Zorg ervoor dat alle XAML-elementen, zoals `TextBox`, `ComboBox`, en `DatePicker`, de juiste `x:Name` hebben, zodat ze in de C#-code kunnen worden aangesproken.
     
  2. **Opslaan knop logica**:
     - Koppel het `SaveButton_Click` event aan de `CreatePatientButton_Click`-methode in de C#-code.

  3. **Foutafhandeling bij invoer**:
     - Voeg visuele feedback toe als er verplichte velden ontbreken.

  ### Geüpdatete code met foutafhandeling:

  #### C# Code (PatientAanmaken.xaml.cs)

  ```csharp
  private void SaveButton_Click(object sender, RoutedEventArgs e)
  {
      CreatePatientButton_Click(sender, e);
  }

  private void CreatePatientButton_Click(object sender, RoutedEventArgs e)
  {
      try
      {
          string firstName = FirstNameTextBox.Text.Trim();
          string lastName = LastNameTextBox.Text.Trim();
          DateTime? birthDate = BirthDatePicker.SelectedDate?.DateTime;
          string address = AddressTextBox.Text.Trim();
          string phoneNumber = PhoneNumberTextBox.Text.Trim();
          string email = EmailTextBox.Text.Trim();
          string classificatie = (ClassificatieComboBox.SelectedItem as ComboBoxItem)?.Content.ToString();

          // Fouten tonen als vereiste velden ontbreken
          if (string.IsNullOrWhiteSpace(firstName) || string.IsNullOrWhiteSpace(lastName) || 
              string.IsNullOrWhiteSpace(email) || !birthDate.HasValue)
          {
              ErrorTextBlock.Text = "Vul alle verplichte velden in.";
              ErrorTextBlock.Visibility = Visibility.Visible;
              return;
          }

          using var db = new AppDbContext();
          var newPatient = new Data.Patient
          {
              FirstName = firstName,
              LastName = lastName,
              BirthDate = birthDate.Value,
              Address = address,
              PhoneNumber = phoneNumber,
              Email = email
          };

          db.Patients.Add(newPatient);
          db.SaveChanges();

          Frame.Navigate(typeof(PatientPage));
      }
      catch (Exception ex)
      {
          Debug.WriteLine("Er is een fout opgetreden: " + ex.Message);
          ErrorTextBlock.Text = "Er is een fout opgetreden bij het opslaan.";
          ErrorTextBlock.Visibility = Visibility.Visible;
      }
  }
  ```

  #### XAML Code (PatientAanmaken.xaml)

  Zorg ervoor dat het `ErrorTextBlock` boven de `Opslaan`-knop staat om zichtbaar te zijn bij fouten.

  ```xml
  <TextBlock x:Name="ErrorTextBlock" TextWrapping="Wrap" Foreground="Red" Visibility="Collapsed" Margin="0,0,0,10"/>
  <Button x:Name="SaveButton" Content="Opslaan" Click="SaveButton_Click"  HorizontalAlignment="Left" Margin="0,20,0,0"/>
  ```

  ### Aanvullende tips:

  - **Debugging**: Als iets niet werkt zoals verwacht, gebruik de debugger om te controleren welke waarden daadwerkelijk in de database worden ingevoerd.
  - **Database-log**: Controleer in je ontwikkelomgeving of de gegevens daadwerkelijk worden toegevoegd aan de database (via tools zoals SQL Browser voor SQLite).

  Als je nog vragen of problemen ervaart, laat het gerust weten!

usage:
  {"prompt_tokens":2936,"completion_tokens":729,"cache_write_input_tokens":0,"cache_read_input_tokens":0,"reasoning_tokens":0}


id: 019d7761-c6a6-72f5-88d4-ad4b182ef970
conversation_id: 019d775b-3b45-70b3-bf1c-995c7b7d18ff
user_id: i302573
agent: App\Ai\Agents\CustomAgent
role: user
attachments: []
tool_calls: []
tool_results: []
usage: []
meta: []
created_at: 2026-04-10 14:33:09
updated_at: 2026-04-10 14:33:09
content:
  perfect now add it to the resource pls:
  <?php

  namespace App\Filament\Blogger\Resources\Posts;

  use App\Filament\Blogger\Resources\Posts\Pages\CreatePost;
  use App\Filament\Blogger\Resources\Posts\Pages\EditPost;
  use App\Filament\Blogger\Resources\Posts\Pages\ListPosts;
  use App\Filament\Blogger\Resources\Posts\Schemas\PostForm;
  use App\Filament\Blogger\Resources\Posts\Tables\PostsTable;
  use App\Models\Post;
  use BackedEnum;
  use Filament\Resources\Resource;
  use Filament\Schemas\Schema;
  use Filament\Support\Icons\Heroicon;
  use Filament\Tables\Table;

  class PostResource extends Resource
  {
      protected static ?string $model = Post::class;

      protected static string|BackedEnum|null $navigationIcon = Heroicon::OutlinedRectangleStack;

      protected static ?string $recordTitleAttribute = 'Post';

      public static function form(Schema $schema): Schema
      {
          return PostForm::configure($schema);
      }

      public static function table(Table $table): Table
      {
          return PostsTable::configure($table);
      }

      public static function getRelations(): array
      {
          return [
              //
          ];
      }

      public static function getPages(): array
      {
          return [
              'index' => ListPosts::route('/'),
              'create' => CreatePost::route('/create'),
              'edit' => EditPost::route('/{record}/edit'),
          ];
      }
  }


id: 019d7761-c6b5-7321-b4ed-7b6028dafe3c
conversation_id: 019d775b-3b45-70b3-bf1c-995c7b7d18ff
user_id: i302573
agent: App\Ai\Agents\CustomAgent
role: assistant
attachments: []
tool_calls: []
tool_results: []
meta: {"provider":"openai","model":"gpt-5-mini","citations":[]}
created_at: 2026-04-10 14:33:09
updated_at: 2026-04-10 14:33:09
content:
  ```php
  <?php

  namespace App\Filament\Blogger\Resources\Posts;

  use App\Filament\Blogger\Resources\Posts\Pages\CreatePost;
  use App\Filament\Blogger\Resources\Posts\Pages\EditPost;
  use App\Filament\Blogger\Resources\Posts\Pages\ListPosts;
  use App\Filament\Blogger\Resources\Posts\Schemas\PostForm;
  use App\Filament\Blogger\Resources\Posts\Tables\PostsTable;
  use App\Models\Post;
  use Filament\Resources\Resource;
  use Filament\Schemas\Schema;
  use Filament\Support\Icons\Heroicon;
  use Filament\Tables\Table;

  class PostResource extends Resource
  {
      protected static ?string $model = Post::class;

      protected static string|object|null $navigationIcon = Heroicon::OutlinedRectangleStack;

      // Use the actual model attribute for the record title
      protected static ?string $recordTitleAttribute = 'title';

      public static function form(Schema $schema): Schema
      {
          return PostForm::configure($schema);
      }

      public static function table(Table $table): Table
      {
          return PostsTable::configure($table);
      }

      public static function getRelations(): array
      {
          return [
              //
          ];
      }

      public static function getPages(): array
      {
          return [
              'index'  => ListPosts::route('/'),
              'create' => CreatePost::route('/create'),
              'edit'   => EditPost::route('/{record}/edit'),
          ];
      }
  }
  ```

usage:
  {"prompt_tokens":1138,"completion_tokens":884,"cache_write_input_tokens":0,"cache_read_input_tokens":3840,"reasoning_tokens":512}


id: 019d7761-f91d-7374-8573-45d2ed9c94c0
conversation_id: 019d7757-a45f-7335-bf0c-57c11ab649fe
user_id: i287513
agent: App\Ai\Agents\CustomAgent
role: user
attachments: []
tool_calls: []
tool_results: []
usage: []
meta: []
created_at: 2026-04-10 14:33:22
updated_at: 2026-04-10 14:33:22
content:
  maak alles engels behalve de comments, fix ook de list foutmelding:   private AppDbContext _db = new AppDbContext();
          private DateTime _huidigeDatum = DateTime.Today;
          private List _alleMeldingen;

          public AssistantPage()
          {
              this.InitializeComponent();

              LaadMeldingen();

              LaadAlleMeldingenVoorKalender();

              UpdateKalenderHeader();
          }

          private void LaadMeldingen()
          {
              //  Haal alle meldingen op uit de DB inclusief gerelateerde Machine & Delivery
              DagMeldingenControl.ItemsSource = _db.Appointments
                  .Include(m => m.Doctor)
                  .OrderByDescending(m => m.DateTime)
                  .ToList();
          }

          private void LaadAlleMeldingenVoorKalender()
          {
              //  Alle meldingen opslaan in een lijst om kalender te highlighten
              _alleMeldingen = _db.Appointments.ToList();
              Kalender.SelectedDates.Clear();
              Kalender.SetDisplayDate(_huidigeDatum);
          }

          private void UpdateKalenderHeader()
          {
              //  Maand en jaar tonen boven de kalender
              MonthYearText.Text = _huidigeDatum.ToString("MMMM yyyy");
          }

          private void Kalender_DayItemChanging(CalendarView sender, CalendarViewDayItemChangingEventArgs args)
          {
              if (args.Item == null) return;

              DateTime day = args.Item.Date.Date;

              //  Controleer of er meldingen zijn op deze dag
              bool heeftMeldingen = _alleMeldingen != null &&
                  _alleMeldingen.Any(m => m.Datum.HasValue && m.Datum.Value.Date == day);

              if (heeftMeldingen)
              {
                  //  Highlight dag met een rode rand en gouden achtergrond
                  args.Item.BorderBrush = new SolidColorBrush(Microsoft.UI.Colors.Red);
                  args.Item.BorderThickness = new Thickness(2);
                  args.Item.Background = new SolidColorBrush(Microsoft.UI.ColorHelper.FromArgb(80, 255, 215, 0));
                  try { args.Item.CornerRadius = new CornerRadius(20); } catch { }
              }
              else
              {
                  //  Reset styling als er geen meldingen zijn
                  args.Item.BorderBrush = null;
                  args.Item.BorderThickness = new Thickness(0);
                  args.Item.Background = null;
                  try { args.Item.CornerRadius = new CornerRadius(0); } catch { }
              }
          }

          private void Kalender_SelectedDatesChanged(CalendarView sender, CalendarViewSelectedDatesChangedEventArgs args)
          {
              //  Als een datum geselecteerd is, laad meldingen voor die dag
              if (sender.SelectedDates.Count > 0)
              {
                  LaadMeldingenVoorDatum(sender.SelectedDates[0].Date);
              }
          }

          private void LaadMeldingenVoorDatum(DateTime date)
          {
              //  Filter meldingen op exacte geselecteerde datum
              DagMeldingenControl.ItemsSource = _db.Appointments
                  .Where(m => m.DateTime.HasValue && m.DateTime == date.Date)
                  .ToList();
          }

          private void PrevMonth_Click(object sender, RoutedEventArgs e)
          {
              //  Ga naar vorige maand
              _huidigeDatum = _huidigeDatum.AddMonths(-1);
              Kalender.SetDisplayDate(_huidigeDatum);
              UpdateKalenderHeader();
          }

          private void NextMonth_Click(object sender, RoutedEventArgs e)
          {
              //  Ga naar volgende maand
              _huidigeDatum = _huidigeDatum.AddMonths(1);
              Kalender.SetDisplayDate(_huidigeDatum);
              UpdateKalenderHeader();
          }

          private void PrevYear_Click(object sender, RoutedEventArgs e)
          {
              //  Ga naar vorig jaar
              _huidigeDatum = _huidigeDatum.AddYears(-1);
              Kalender.SetDisplayDate(_huidigeDatum);
              UpdateKalenderHeader();
          }

          private void NextYear_Click(object sender, RoutedEventArgs e)
          {
              //  Ga naar volgend jaar
              _huidigeDatum = _huidigeDatum.AddYears(1);
              Kalender.SetDisplayDate(_huidigeDatum);
              UpdateKalenderHeader();
          }


id: 019d7761-f92c-7322-9f3c-124904ec32b8
conversation_id: 019d7757-a45f-7335-bf0c-57c11ab649fe
user_id: i287513
agent: App\Ai\Agents\CustomAgent
role: assistant
attachments: []
tool_calls: []
tool_results: []
meta: {"provider":"openai","model":"gpt-5","citations":[]}
created_at: 2026-04-10 14:33:22
updated_at: 2026-04-10 14:33:22
content:
  Here’s your code with English identifiers (comments kept in Dutch) and the List error fixed by using a generic type. I also made the date comparisons consistent and passed a DateTimeOffset to Calendar.SetDisplayDate. Remember to update the XAML names to match (DagMeldingenControl -> DayAppointmentsControl, Kalender -> Calendar).

  Add this using if not present:
  - using System.Collections.Generic;

  private AppDbContext _db = new AppDbContext();
  private DateTime _currentDate = DateTime.Today;
  private List<Appointment> _allAppointments;

  public AssistantPage()
  {
      this.InitializeComponent();

      LoadAppointments();

      LoadAllAppointmentsForCalendar();

      UpdateCalendarHeader();
  }

  private void LoadAppointments()
  {
      //  Haal alle meldingen op uit de DB inclusief gerelateerde Machine & Delivery
      DayAppointmentsControl.ItemsSource = _db.Appointments
          .Include(a => a.Doctor)
          .OrderByDescending(a => a.DateTime)
          .ToList();
  }

  private void LoadAllAppointmentsForCalendar()
  {
      //  Alle meldingen opslaan in een lijst om kalender te highlighten
      _allAppointments = _db.Appointments.ToList();
      Calendar.SelectedDates.Clear();
      Calendar.SetDisplayDate(new DateTimeOffset(_currentDate));
  }

  private void UpdateCalendarHeader()
  {
      //  Maand en jaar tonen boven de kalender
      MonthYearText.Text = _currentDate.ToString("MMMM yyyy");
  }

  private void Calendar_DayItemChanging(CalendarView sender, CalendarViewDayItemChangingEventArgs args)
  {
      if (args.Item == null) return;

      DateTime day = args.Item.Date.Date;

      //  Controleer of er meldingen zijn op deze dag
      bool hasAppointments = _allAppointments != null &&
          _allAppointments.Any(a => a.DateTime.HasValue && a.DateTime.Value.Date == day);

      if (hasAppointments)
      {
          //  Highlight dag met een rode rand en gouden achtergrond
          args.Item.BorderBrush = new SolidColorBrush(Microsoft.UI.Colors.Red);
          args.Item.BorderThickness = new Thickness(2);
          args.Item.Background = new SolidColorBrush(Microsoft.UI.ColorHelper.FromArgb(80, 255, 215, 0));
          try { args.Item.CornerRadius = new CornerRadius(20); } catch { }
      }
      else
      {
          //  Reset styling als er geen meldingen zijn
          args.Item.BorderBrush = null;
          args.Item.BorderThickness = new Thickness(0);
          args.Item.Background = null;
          try { args.Item.CornerRadius = new CornerRadius(0); } catch { }
      }
  }

  private void Calendar_SelectedDatesChanged(CalendarView sender, CalendarViewSelectedDatesChangedEventArgs args)
  {
      //  Als een datum geselecteerd is, laad meldingen voor die dag
      if (sender.SelectedDates.Count > 0)
      {
          LoadAppointmentsForDate(sender.SelectedDates[0].Date);
      }
  }

  private void LoadAppointmentsForDate(DateTime date)
  {
      //  Filter meldingen op exacte geselecteerde datum
      DayAppointmentsControl.ItemsSource = _db.Appointments
          .Where(a => a.DateTime.HasValue && a.DateTime.Value.Date == date.Date)
          .ToList();
  }

  private void PrevMonth_Click(object sender, RoutedEventArgs e)
  {
      //  Ga naar vorige maand
      _currentDate = _currentDate.AddMonths(-1);
      Calendar.SetDisplayDate(new DateTimeOffset(_currentDate));
      UpdateCalendarHeader();
  }

  private void NextMonth_Click(object sender, RoutedEventArgs e)
  {
      //  Ga naar volgende maand
      _currentDate = _currentDate.AddMonths(1);
      Calendar.SetDisplayDate(new DateTimeOffset(_currentDate));
      UpdateCalendarHeader();
  }

  private void PrevYear_Click(object sender, RoutedEventArgs e)
  {
      //  Ga naar vorig jaar
      _currentDate = _currentDate.AddYears(-1);
      Calendar.SetDisplayDate(new DateTimeOffset(_currentDate));
      UpdateCalendarHeader();
  }

  private void NextYear_Click(object sender, RoutedEventArgs e)
  {
      //  Ga naar volgend jaar
      _currentDate = _currentDate.AddYears(1);
      Calendar.SetDisplayDate(new DateTimeOffset(_currentDate));
      UpdateCalendarHeader();
  }

  Notes:
  - Replace Appointment with the actual entity type if it differs.
  - Update your XAML names to match the renamed controls.

usage:
  {"prompt_tokens":1765,"completion_tokens":4669,"cache_write_input_tokens":0,"cache_read_input_tokens":0,"reasoning_tokens":3712}


id: 019d7761-fe86-7029-b655-3b11aa62fd5d
conversation_id: 019d7761-fe69-72db-9f1b-420ac0e85b85
user_id: D300800
agent: App\Ai\Agents\CustomAgent
role: assistant
attachments: []
tool_calls: []
tool_results: []
meta: {"provider":"openai","model":"gpt-5-mini","citations":[]}
created_at: 2026-04-10 14:33:24
updated_at: 2026-04-10 14:33:24
content:
  Het probleem is dat de kleur niet als geldige hex-waarde is opgegeven — er ontbreekt het "#" (en je kunt optioneel een alpha-waarde meegeven). Voorbeeldcorrecties:

  Eén regel, met hex-kleur (zonder expliciete alpha; dit is RRGGBB):
  <TextBlock x:Name="WelcomeText" FontSize="22" Text="Welkom!" Foreground="#42D7D7"/>

  Met expliciete alpha (aanbevolen, FF = volledig ondoorzichtig):
  <TextBlock x:Name="WelcomeText" FontSize="22" Text="Welkom!" Foreground="#FF42D7D7"/>

  Of als je een SolidColorBrush wilt gebruiken:
  <TextBlock x:Name="WelcomeText" FontSize="22" Text="Welkom!">
    <TextBlock.Foreground>
      <SolidColorBrush Color="#FF42D7D7"/>
    </TextBlock.Foreground>
  </TextBlock>

  Kies de variant die bij je projectstijl past.

usage:
  {"prompt_tokens":54,"completion_tokens":799,"cache_write_input_tokens":0,"cache_read_input_tokens":0,"reasoning_tokens":576}


id: 019d7763-8891-7239-b11c-c0c43a571aaa
conversation_id: 019d775e-f012-71eb-8c6e-bcc10c315a91
user_id: i293082
agent: App\Ai\Agents\CustomAgent
role: assistant
attachments: []
tool_calls: []
tool_results: []
meta: {"provider":"openai","model":"gpt-4o","citations":[]}
created_at: 2026-04-10 14:35:04
updated_at: 2026-04-10 14:35:04
content:
  Laten we de veelvoorkomende problemen en oplossingen doornemen:

  1. **Controleer de Foutmelding**:
     - Wat zegt de foutmelding precies? Dit kan helpen om het probleem beter te begrijpen.

  2. **Controleren op ontbrekende of verwarrende code**:
     - Controleer of de `AppDbContext` correct is geconfigureerd en dat de `DbSet<Patient>` eigenschap aanwezig is.
     - Zorg ervoor dat alle benodigde namespaces zijn toegevoegd.

  3. **Volledige Context controleren**:
     - Zorg ervoor dat je alle ontbrekende stukjes hebt, zoals de `Patient` klasse en `AppDbContext` configuratie.

  4. **Fouten in XAML controleren**:
     - Zorg ervoor dat alle `x:Name` eigenschappen overeenkomen tussen XAML en je C#-code.

  ### Mogelijke herziening aan de hand van jouw situatie

  #### C# Code (PatientAanmaken.xaml.cs)

  ```csharp
  using CareTracker.Data;
  using CareTracker.Pages.Login;
  using Microsoft.UI.Xaml;
  using Microsoft.UI.Xaml.Controls;
  using System;
  using System.Diagnostics;

  namespace CareTracker.Pages.Patient
  {
      public sealed partial class PatientAanmaken : Page
      {
          public PatientAanmaken()
          {
              this.InitializeComponent();
          }

          private void SaveButton_Click(object sender, RoutedEventArgs e)
          {
              CreatePatientButton_Click(sender, e);
          }

          private void CreatePatientButton_Click(object sender, RoutedEventArgs e)
          {
              try
              {
                  string firstName = FirstNameTextBox.Text.Trim();
                  string lastName = LastNameTextBox.Text.Trim();
                  DateTime? birthDate = BirthDatePicker.SelectedDate?.DateTime;
                  string address = AddressTextBox.Text.Trim();
                  string phoneNumber = PhoneNumberTextBox.Text.Trim();
                  string email = EmailTextBox.Text.Trim();
                  string classificatie = (ClassificatieComboBox.SelectedItem as ComboBoxItem)?.Content.ToString();

                  if (string.IsNullOrWhiteSpace(firstName) || string.IsNullOrWhiteSpace(lastName) ||
                      string.IsNullOrWhiteSpace(email) || !birthDate.HasValue)
                  {
                      ErrorTextBlock.Text = "Vul alle verplichte velden in.";
                      ErrorTextBlock.Visibility = Visibility.Visible;
                      return;
                  }

                  using var db = new AppDbContext();
                  var newPatient = new Data.Patient
                  {
                      FirstName = firstName,
                      LastName = lastName,
                      BirthDate = birthDate.Value,
                      Address = address,
                      PhoneNumber = phoneNumber,
                      Email = email
                  };

                  db.Patients.Add(newPatient);
                  db.SaveChanges();

                  Frame.Navigate(typeof(PatientPage));
              }
              catch (Exception ex)
              {
                  Debug.WriteLine("Er is een fout opgetreden: " + ex.Message);
                  ErrorTextBlock.Text = "Er is een fout opgetreden bij het opslaan.";
                  ErrorTextBlock.Visibility = Visibility.Visible;
              }
          }
      }
  }
  ```

  #### Controleren van `AppDbContext`:

  ```csharp
  using Microsoft.EntityFrameworkCore;

  namespace CareTracker.Data
  {
      public class AppDbContext : DbContext
      {
          public DbSet<Patient> Patients { get; set; }

          protected override void OnConfiguring(DbContextOptionsBuilder optionsBuilder)
          {
              optionsBuilder.UseSqlite("data source=caretracker.db");
          }
      }

      public class Patient
      {
          public int Id { get; set; }
          public string FirstName { get; set; }
          public string LastName { get; set; }
          public DateTime BirthDate { get; set; }
          public string Address { get; set; }
          public string PhoneNumber { get; set; }
          public string Email { get; set; }
      }
  }
  ```

  ### Nu verder:

  - Controleer of je de `SaveButton_Click` method correct aan de save-knop in je XAML hebt gekoppeld.
  - Lijkt iets nog niet goed, deel dan gerust de specifieke foutmelding voor gerichter advies!

usage:
  {"prompt_tokens":3677,"completion_tokens":856,"cache_write_input_tokens":0,"cache_read_input_tokens":0,"reasoning_tokens":0}


id: 019d7763-9625-73dc-8b61-482d332bb047
conversation_id: 019d775b-3b45-70b3-bf1c-995c7b7d18ff
user_id: i302573
agent: App\Ai\Agents\CustomAgent
role: user
attachments: []
tool_calls: []
tool_results: []
usage: []
meta: []
created_at: 2026-04-10 14:35:08
updated_at: 2026-04-10 14:35:08
content:
  <?php

  use Illuminate\Database\Migrations\Migration;
  use Illuminate\Database\Schema\Blueprint;
  use Illuminate\Support\Facades\Schema;

  return new class extends Migration {
      public function up(): void {
          Schema::create('posts', function (Blueprint $table) {
              $table->id();
              $table->unsignedBigInteger('blog_id');
              $table->string('title');
              $table->text('body');
              $table->string('image_url')->nullable();

              // take note this is an enum
              $table->enum('continent', ['Africa', 'Antarctica', 'Asia', 'Europe', 'North_America', 'Oceania', 'South_America']);
              $table->string('country_name');
              $table->string('place_name');
              $table->enum('categories', ['adventure','culture','food','nature','tips','budget','luxury']);

              // these values are taken from the many to many tables every so often
              $table->integer('total_likes');
              $table->double('total_rating');
              $table->integer('total_views');

              //timestamp
              $table->timestamps();

              // refs
              $table->foreign('blog_id')->references('id')->on('blogs')->onDelete('cascade');
          });
      }

      public function down(): void {
          Schema::dropIfExists('posts');
      }
  };


  <?php

  namespace App\Filament\Blogger\Resources\Posts\Schemas;

  use Filament\Schemas\Schema;
  use Filament\Forms\Components\TextInput;
  use Filament\Forms\Components\Textarea;
  use Filament\Forms\Components\Select;
  use Filament\Forms\Components\FileUpload;
  use Filament\Forms\Components\DateTimePicker;

  class PostForm
  {
      public static function configure(Schema $schema): Schema
      {
          return $schema
              ->components([
                  // Blog (relatie, alleen-lezen)
                  TextInput::make('blog_id')
                      ->label('Blog')
                      ->disabled()
                      ->dehydrated(false)
                      ->formatStateUsing(fn ($record) => $record?->getBlogFromPost?->title ?? 'Onbekend'),

                  // Titel
                  TextInput::make('title')
                      ->label('Titel')
                      ->required()
                      ->maxLength(255),

                  // Inhoud / body
                  Textarea::make('body')
                      ->label('Inhoud')
                      ->rows(8),

                  // Afbeelding (upload; slaat pad op in image_url)
                  FileUpload::make('image_url')
                      ->label('Afbeelding')
                      ->image()
                      ->directory('posts')
                      ->maxSize(2048)
                      ->visibility('public'),

                  // Locatie velden
                  Select::make('continent')
                      ->label('Continent')
                      ->options([
                          'africa' => 'Africa',
                          'antarctica' => 'Antarctica',
                          'asia' => 'Asia',
                          'europe' => 'Europe',
                          'north-america' => 'North America',
                          'oceania' => 'Oceania',
                          'south-america' => 'South America',
                      ])
                      ->placeholder('Kies continent')
                      ->searchable(),

                  TextInput::make('country_name')
                      ->label('Land')
                      ->maxLength(150),

                  TextInput::make('place_name')
                      ->label('Plaats')
                      ->maxLength(150),

                  // Categories: comma-gescheiden invoer (aanpasbaar naar TagsInput indien beschikbaar)
                  TextInput::make('categories')
                      ->label('Categorieën')
                      ->helperText('Commag gescheiden lijst van categorieën'),

                  // Statistieken (alleen-lezen, niet opgeslagen via formulier)
                  TextInput::make('total_likes')
                      ->label('Totaal likes')
                      ->disabled()
                      ->dehydrated(false)
                      ->formatStateUsing(fn ($state) => (int) ($state ?? 0)),

                  TextInput::make('total_views')
                      ->label('Totaal weergaven')
                      ->disabled()
                      ->dehydrated(false)
                      ->formatStateUsing(fn ($state) => (int) ($state ?? 0)),

                  TextInput::make('total_rating')
                      ->label('Gemiddelde beoordeling')
                      ->disabled()
                      ->dehydrated(false)
                      ->formatStateUsing(fn ($state) => $state !== null ? number_format($state, 2, ',', '.') : null),

                  // Aangemaakt op (alleen-lezen)
                  DateTimePicker::make('created_at')
                      ->label('Aangemaakt op')
                      ->disabled()
                      ->dehydrated(false)
                      ->formatStateUsing(fn ($state) => $state ? \Illuminate\Support\Carbon::parse($state)->format('d-m-Y H:i') : null),
              ]);
      }
  }


id: 019d7763-9633-71b8-a4fd-b56ca2c7d557
conversation_id: 019d775b-3b45-70b3-bf1c-995c7b7d18ff
user_id: i302573
agent: App\Ai\Agents\CustomAgent
role: assistant
attachments: []
tool_calls: []
tool_results: []
meta: {"provider":"openai","model":"gpt-5-mini","citations":[]}
created_at: 2026-04-10 14:35:08
updated_at: 2026-04-10 14:35:08
content:
  Hier zijn twee verbeterde bestanden die elkaar matchen:

  - Migratie: zet default-waarden op de total_* velden (anders faalt create omdat de kolommen verplicht zijn).
  - Form: komt overeen met de enum-waarden uit de migratie, gebruikt Select voor continent en categories, en biedt een echte blog-select (zodat bij aanmaken een blog gekozen kan worden).

  Migratie (aangepast):
  ```php
  <?php

  use Illuminate\Database\Migrations\Migration;
  use Illuminate\Database\Schema\Blueprint;
  use Illuminate\Support\Facades\Schema;

  return new class extends Migration {
      public function up(): void {
          Schema::create('posts', function (Blueprint $table) {
              $table->id();
              $table->unsignedBigInteger('blog_id');
              $table->string('title');
              $table->text('body');
              $table->string('image_url')->nullable();

              // take note this is an enum
              $table->enum('continent', [
                  'Africa',
                  'Antarctica',
                  'Asia',
                  'Europe',
                  'North_America',
                  'Oceania',
                  'South_America'
              ])->nullable();

              $table->string('country_name')->nullable();
              $table->string('place_name')->nullable();
              $table->enum('categories', [
                  'adventure',
                  'culture',
                  'food',
                  'nature',
                  'tips',
                  'budget',
                  'luxury'
              ])->nullable();

              // these values are taken from the many to many tables every so often
              // set sensible defaults so creating a post via Filament niet faalt
              $table->integer('total_likes')->default(0);
              $table->double('total_rating')->default(0);
              $table->integer('total_views')->default(0);

              //timestamps
              $table->timestamps();

              // refs
              $table->foreign('blog_id')->references('id')->on('blogs')->onDelete('cascade');
          });
      }

      public function down(): void {
          Schema::dropIfExists('posts');
      }
  };
  ```

  Formulier (PostForm) — afgestemd op de migratie:
  ```php
  <?php

  namespace App\Filament\Blogger\Resources\Posts\Schemas;

  use App\Models\Blog;
  use Filament\Schemas\Schema;
  use Filament\Forms\Components\TextInput;
  use Filament\Forms\Components\Textarea;
  use Filament\Forms\Components\Select;
  use Filament\Forms\Components\FileUpload;
  use Filament\Forms\Components\DateTimePicker;

  class PostForm
  {
      public static function configure(Schema $schema): Schema
      {
          return $schema
              ->components([
                  // Blog: kies een blog bij aanmaken
                  Select::make('blog_id')
                      ->label('Blog')
                      ->options(fn () => Blog::pluck('title', 'id')->toArray())
                      ->searchable()
                      ->required(),

                  // Titel
                  TextInput::make('title')
                      ->label('Titel')
                      ->required()
                      ->maxLength(255),

                  // Inhoud / body
                  Textarea::make('body')
                      ->label('Inhoud')
                      ->rows(8),

                  // Afbeelding (upload; slaat pad op in image_url)
                  FileUpload::make('image_url')
                      ->label('Afbeelding')
                      ->image()
                      ->directory('posts')
                      ->maxSize(2048)
                      ->visibility('public'),

                  // Locatie velden — exact dezelfde waarden als in de DB-enum
                  Select::make('continent')
                      ->label('Continent')
                      ->options([
                          'Africa' => 'Africa',
                          'Antarctica' => 'Antarctica',
                          'Asia' => 'Asia',
                          'Europe' => 'Europe',
                          'North_America' => 'North America',
                          'Oceania' => 'Oceania',
                          'South_America' => 'South America',
                      ])
                      ->placeholder('Kies continent')
                      ->searchable()
                      ->nullable(),

                  TextInput::make('country_name')
                      ->label('Land')
                      ->maxLength(150)
                      ->nullable(),

                  TextInput::make('place_name')
                      ->label('Plaats')
                      ->maxLength(150)
                      ->nullable(),

                  // Categories: single-select (enum in de DB)
                  Select::make('categories')
                      ->label('Categorie')
                      ->options([
                          'adventure' => 'Adventure',
                          'culture'   => 'Culture',
                          'food'      => 'Food',
                          'nature'    => 'Nature',
                          'tips'      => 'Tips',
                          'budget'    => 'Budget',
                          'luxury'    => 'Luxury',
                      ])
                      ->placeholder('Kies categorie')
                      ->searchable()
                      ->nullable(),

                  // Statistieken (alleen-lezen, niet opgeslagen via formulier)
                  TextInput::make('total_likes')
                      ->label('Totaal likes')
                      ->disabled()
                      ->dehydrated(false)
                      ->formatStateUsing(fn ($state) => (int) ($state ?? 0)),

                  TextInput::make('total_views')
                      ->label('Totaal weergaven')
                      ->disabled()
                      ->dehydrated(false)
                      ->formatStateUsing(fn ($state) => (int) ($state ?? 0)),

                  TextInput::make('total_rating')
                      ->label('Gemiddelde beoordeling')
                      ->disabled()
                      ->dehydrated(false)
                      ->formatStateUsing(fn ($state) => $state !== null ? number_format($state, 2, ',', '.') : null),

                  // Aangemaakt op (alleen-lezen)
                  DateTimePicker::make('created_at')
                      ->label('Aangemaakt op')
                      ->disabled()
                      ->dehydrated(false)
                      ->formatStateUsing(fn ($state) => $state ? \Illuminate\Support\Carbon::parse($state)->format('d-m-Y H:i') : null),
              ]);
      }
  }
  ```

  Opmerkingen / aanbevelingen:
  - Ik heb de enum-waarden in de form precies laten overeenkomen met die in de migratie (hoofdletters/underscores). Als je liever andere labels toont kun je dat blijven doen (zoals ik voor North_America -> "North America"), maar de keys moeten overeenkomen met de opgeslagen waarden.
  - Ik heb categories als single-select gelaten omdat je migratie een enum (één waarde) gebruikt. Als je meerdere categorieën per post wilt, wijzig dan de kolom naar string (csv/JSON) of maak een pivot-table en maak het formulier multi-select.
  - Defaults voor total_likes/total_views/total_rating toegevoegd in de migratie om problemen bij create op te lossen.
  - Je model-relatie heeft methodenaam getBlogFromPost(). Als je Filament's relationship() wilt gebruiken in plaats van options(), pas de relatie-naam aan of voeg een standaard Eloquent relation name blog(). current Select->options(Blog::pluck(...)) is eenvoudiger en werkt direct.

usage:
  {"prompt_tokens":1487,"completion_tokens":2443,"cache_write_input_tokens":0,"cache_read_input_tokens":4864,"reasoning_tokens":896}


id: 019d7764-0b6f-73d1-97f6-6fe4e38175e8
conversation_id: 019d76fe-3b07-7095-acc1-ec6a2420f9f1
user_id: i301561
agent: App\Ai\Agents\CustomAgent
role: assistant
attachments: []
tool_calls: []
tool_results: []
meta: {"provider":"openai","model":"gpt-5","citations":[]}
created_at: 2026-04-10 14:35:38
updated_at: 2026-04-10 14:35:38
content:
  ```php
  <?php
  // Optie 2 fix: Invalid route action — gebruik de juiste base class en registratie
  // Er zijn twee varianten, afhankelijk van je Filament-versie.
  // Gebruik NIET je eigen Laravel route naar deze class (geen Route::get voor de login page).
  // Laat Filament de route registreren via de PanelProvider (v3) of config (v2).

  // ————————————————————————————————————————————————————————————————
  // Filament v3
  // ————————————————————————————————————————————————————————————————

  /*
  composer show filament/filament | grep versions
  ^— Controleer of je v3 gebruikt. Dan onderstaande v3-implementatie toepassen.
  */
  ```

  ```php
  <?php
  // app/Filament/Auth/Login.php (Filament v3)

  namespace App\Filament\Auth;

  use Filament\Facades\Filament;
  use Filament\Pages\Auth\Login as BaseLogin;

  class Login extends BaseLogin
  {
      protected function getRedirectUrl(): string
      {
          $user = auth()->user();

          if ($user && method_exists($user, 'defaultPanelId')) {
              $panelId = $user->defaultPanelId();
              // Aanrader: stuur naar een concrete pagina binnen het juiste panel
              return route("filament.{$panelId}.pages.dashboard");
          }

          // Fallback: huidige panel
          return route('filament.' . Filament::getCurrentPanel()->getId() . '.pages.dashboard');
      }
  }
  ```

  ```php
  <?php
  // app/Providers/Filament/AdminPanelProvider.php (Filament v3 - voorbeeld)

  namespace App\Providers\Filament;

  use App\Filament\Auth\Login;
  use Filament\Panel;
  use Filament\PanelProvider;
  use Filament\Http\Middleware\Authenticate;

  class AdminPanelProvider extends PanelProvider
  {
      public function panel(Panel $panel): Panel
      {
          return $panel
              ->id('admin')
              ->path('admin')
              ->login(Login::class) // <-- registreer de custom Login page; GEEN Laravel route handmatig toevoegen
              ->authMiddleware([
                  Authenticate::class,
              ]);
      }
  }
  ```

  ```php
  <?php
  // app/Providers/Filament/ReaderPanelProvider.php (Filament v3 - voorbeeld)

  namespace App\Providers\Filament;

  use App\Filament\Auth\Login;
  use Filament\Panel;
  use Filament\PanelProvider;
  use Filament\Http\Middleware\Authenticate;

  class ReaderPanelProvider extends PanelProvider
  {
      public function panel(Panel $panel): Panel
      {
          return $panel
              ->id('reader')
              ->path('reader')
              ->login(Login::class)
              ->authMiddleware([
                  Authenticate::class,
              ]);
      }
  }
  ```

  ```php
  <?php
  // app/Providers/Filament/BloggerPanelProvider.php (Filament v3 - voorbeeld)

  namespace App\Providers\Filament;

  use App\Filament\Auth\Login;
  use Filament\Panel;
  use Filament\PanelProvider;
  use Filament\Http\Middleware\Authenticate;

  class BloggerPanelProvider extends PanelProvider
  {
      public function panel(Panel $panel): Panel
      {
          return $panel
              ->id('blogger')
              ->path('blogger')
              ->login(Login::class)
              ->authMiddleware([
                  Authenticate::class,
              ]);
      }
  }
  ```

  ```php
  <?php
  // ————————————————————————————————————————————————————————————————
  // Filament v2
  // ————————————————————————————————————————————————————————————————

  /*
  Als je Filament v2 gebruikt, extend dan de v2 Login Livewire component
  en registreer de class via de Filament v2 config (NIET via je eigen route).
  */
  ```

  ```php
  <?php
  // app/Filament/Auth/Login.php (Filament v2)

  namespace App\Filament\Auth;

  use Filament\Http\Livewire\Auth\Login as BaseLogin; // v2 base class

  class Login extends BaseLogin
  {
      protected function getRedirectUrl(): string
      {
          $user = auth()->user();

          if ($user && method_exists($user, 'defaultPanelId')) {
              $panelId = $user->defaultPanelId();
              return route("filament.{$panelId}.pages.dashboard");
          }

          // Fallback: default Filament home (kan per setup verschillen)
          return route('filament.pages.dashboard');
      }
  }
  ```

  ```php
  <?php
  // config/filament.php (Filament v2 - registreer je custom login component)
  // Voeg/controleer dit stuk in je Filament v2 config. Bestaat de 'auth' sectie niet, voeg deze toe.

  return [

      // ...

      'auth' => [
          'guard' => 'web',

          // Custom login Livewire component
          'pages' => [
              'login' => \App\Filament\Auth\Login::class,
          ],
      ],

      // ...
  ];
  ```

  ```php
  <?php
  // ALGEMEEN (v2/v3): Zorg dat je nergens een Laravel route naar je Login class definieert.
  // De fout "Invalid route action: [App\Filament\Auth\Login]" ontstaat vaak wanneer je dit doet:
  //
  // Route::get('/login', [\App\Filament\Auth\Login::class, '__invoke']); // VERKEERD — niet doen.
  //
  // Oplossing: registreer enkel via PanelProvider->login(...) (v3) of via config/filament.php (v2).
  ```

  ```bash
  # Cache legen na wijzigingen
  php artisan optimize:clear
  ```

usage:
  {"prompt_tokens":1485,"completion_tokens":3270,"cache_write_input_tokens":0,"cache_read_input_tokens":5760,"reasoning_tokens":2048}


id: 019d7764-0c76-710c-847a-1925fdd5aa12
conversation_id: 019d7757-a45f-7335-bf0c-57c11ab649fe
user_id: i287513
agent: App\Ai\Agents\CustomAgent
role: user
attachments: []
tool_calls: []
tool_results: []
usage: []
meta: []
created_at: 2026-04-10 14:35:38
updated_at: 2026-04-10 14:35:38
content:
  <Grid>
      <!-- BACKGROUND -->
      <Grid.Background>
          <LinearGradientBrush StartPoint="0,0" EndPoint="1,1">
              <GradientStop Color="White" Offset="0"/>
              <GradientStop Color="#000000" Offset="1"/>
          </LinearGradientBrush>
      </Grid.Background>

      <!-- MAIN LAYOUT -->
      <Grid Padding="40">
          <Grid.RowDefinitions>
              <RowDefinition Height="Auto"/>
              <RowDefinition Height="Auto"/>
              <RowDefinition Height="*"/>
          </Grid.RowDefinitions>

          <!-- HEADER -->
          <Border
          Background="#CC000000"
          CornerRadius="18"
          Padding="20"
          Margin="0,0,0,25">
              <Grid>
                  <Grid.ColumnDefinitions>
                      <ColumnDefinition Width="Auto"/>
                      <ColumnDefinition Width="*"/>
                  </Grid.ColumnDefinitions>

                  <Button
                  Content="← Dashboard"
                  FontSize="14"
                  Padding="14,8"
                  CornerRadius="10"
                  Background="#FFD700"
                  Foreground="Black"
                  FontWeight="SemiBold"
                  Click="BackToMaintenanceDashboard"/>

                  <!-- TITLE (BLIJFT WIT) -->
                  <TextBlock
                  Grid.Column="1"
                  Text="Maintenance Kalender"
                  FontSize="34"
                  FontWeight="Bold"
                  Foreground="White"
                  HorizontalAlignment="Center"/>
              </Grid>
          </Border>

          <!-- MONTH NAVIGATION -->
          <Border
          Grid.Row="1"
          Background="#AA000000"
          CornerRadius="14"
          Padding="14"
          Margin="0,0,0,20">
              <StackPanel Orientation="Horizontal"
                      HorizontalAlignment="Center"
                      Spacing="14">
                  <Button Content="≪" Click="PrevYear_Click" Foreground="Black"/>
                  <Button Content="‹" Click="PrevMonth_Click" Foreground="Black"/>

                  <TextBlock x:Name="MonthYearText"
                         FontSize="26"
                         FontWeight="Bold"
                         Foreground="White"
                         VerticalAlignment="Center"/>

                  <Button Content="›" Click="NextMonth_Click" Foreground="Black"/>
                  <Button Content="≫" Click="NextYear_Click" Foreground="Black"/>
              </StackPanel>
          </Border>

          <!-- CONTENT -->
          <Grid Grid.Row="2">
              <Grid.ColumnDefinitions>
                  <ColumnDefinition Width="Auto"/>
                  <ColumnDefinition Width="*"/>
              </Grid.ColumnDefinitions>

              <!-- CALENDAR -->
              <Border
              Background="White"
              CornerRadius="18"
              Padding="12"
              Margin="0,0,25,0">
                  <CalendarView
                  x:Name="Kalender"
                  SelectionMode="Single"
                  SelectedDatesChanged="Kalender_SelectedDatesChanged"
                  CalendarViewDayItemChanging="Kalender_DayItemChanging"
                  Width="650"
                  Height="420"/>
              </Border>

              <!-- DAY REPORTS -->
              <Border
              Grid.Column="1"
              Background="#CCFFFFFF"
              CornerRadius="18"
              Padding="18">
                  <StackPanel>
                      <TextBlock
                      Text="Meldingen op geselecteerde dag"
                      FontSize="22"
                      FontWeight="Bold"
                      Foreground="Black"
                      Margin="0,0,0,12"/>

                      <Border Height="1"
                          Background="White"
                          Opacity="0.6"
                          Margin="0,0,0,12"/>

                      <ScrollViewer VerticalScrollBarVisibility="Auto">
                          <ItemsControl x:Name="DagMeldingenControl">
                              <ItemsControl.ItemTemplate>
                                  <DataTemplate x:DataType="models:Appointment">
                                      <Border
                                      Background="White"
                                      CornerRadius="14"
                                      Padding="14"
                                      Margin="0,0,0,12"
                                      BorderBrush="#E0E0E0"
                                      BorderThickness="1">
                                          <StackPanel Spacing="6">
                                              <TextBlock Text="docter"
                                                     FontSize="12"
                                                     Foreground="Black"/>
                                              <TextBlock Text="{x:Bind Doctor.Name}"
                                                     FontWeight="Bold"
                                                     Foreground="Black"/>

                                             
                                          </StackPanel>
                                      </Border>
                                  </DataTemplate>
                              </ItemsControl.ItemTemplate>
                          </ItemsControl>
                      </ScrollViewer>
                  </StackPanel>
              </Border>
          </Grid>
      </Grid>
  </Grid>


id: 019d7764-0c8e-7210-ac14-868d882047c3
conversation_id: 019d7757-a45f-7335-bf0c-57c11ab649fe
user_id: i287513
agent: App\Ai\Agents\CustomAgent
role: assistant
attachments: []
tool_calls: []
tool_results: []
meta: {"provider":"openai","model":"gpt-5","citations":[]}
created_at: 2026-04-10 14:35:38
updated_at: 2026-04-10 14:35:38
content:
  Here’s the XAML updated to English (UI text, names, and event handlers), with comments kept in Dutch. It matches the earlier code-behind (Calendar, DayAppointmentsControl, Calendar_* handlers).

  <Grid>
      <!-- ACHTERGROND -->
      <Grid.Background>
          <LinearGradientBrush StartPoint="0,0" EndPoint="1,1">
              <GradientStop Color="White" Offset="0"/>
              <GradientStop Color="#000000" Offset="1"/>
          </LinearGradientBrush>
      </Grid.Background>

      <!-- HOOFDINDELING -->
      <Grid Padding="40">
          <Grid.RowDefinitions>
              <RowDefinition Height="Auto"/>
              <RowDefinition Height="Auto"/>
              <RowDefinition Height="*"/>
          </Grid.RowDefinitions>

          <!-- KOP -->
          <Border
              Background="#CC000000"
              CornerRadius="18"
              Padding="20"
              Margin="0,0,0,25">
              <Grid>
                  <Grid.ColumnDefinitions>
                      <ColumnDefinition Width="Auto"/>
                      <ColumnDefinition Width="*"/>
                  </Grid.ColumnDefinitions>

                  <Button
                      Content="← Dashboard"
                      FontSize="14"
                      Padding="14,8"
                      CornerRadius="10"
                      Background="#FFD700"
                      Foreground="Black"
                      FontWeight="SemiBold"
                      Click="BackToMaintenanceDashboard"/>

                  <!-- TITEL (BLIJFT WIT) -->
                  <TextBlock
                      Grid.Column="1"
                      Text="Maintenance Calendar"
                      FontSize="34"
                      FontWeight="Bold"
                      Foreground="White"
                      HorizontalAlignment="Center"/>
              </Grid>
          </Border>

          <!-- MAANDNAVIGATIE -->
          <Border
              Grid.Row="1"
              Background="#AA000000"
              CornerRadius="14"
              Padding="14"
              Margin="0,0,0,20">
              <StackPanel Orientation="Horizontal"
                          HorizontalAlignment="Center"
                          Spacing="14">
                  <Button Content="≪" Click="PrevYear_Click" Foreground="Black"/>
                  <Button Content="‹" Click="PrevMonth_Click" Foreground="Black"/>

                  <TextBlock x:Name="MonthYearText"
                             FontSize="26"
                             FontWeight="Bold"
                             Foreground="White"
                             VerticalAlignment="Center"/>

                  <Button Content="›" Click="NextMonth_Click" Foreground="Black"/>
                  <Button Content="≫" Click="NextYear_Click" Foreground="Black"/>
              </StackPanel>
          </Border>

          <!-- INHOUD -->
          <Grid Grid.Row="2">
              <Grid.ColumnDefinitions>
                  <ColumnDefinition Width="Auto"/>
                  <ColumnDefinition Width="*"/>
              </Grid.ColumnDefinitions>

              <!-- KALENDER -->
              <Border
                  Background="White"
                  CornerRadius="18"
                  Padding="12"
                  Margin="0,0,25,0">
                  <CalendarView
                      x:Name="Calendar"
                      SelectionMode="Single"
                      SelectedDatesChanged="Calendar_SelectedDatesChanged"
                      CalendarViewDayItemChanging="Calendar_DayItemChanging"
                      Width="650"
                      Height="420"/>
              </Border>

              <!-- DAGAFSPRAKEN -->
              <Border
                  Grid.Column="1"
                  Background="#CCFFFFFF"
                  CornerRadius="18"
                  Padding="18">
                  <StackPanel>
                      <TextBlock
                          Text="Appointments on selected day"
                          FontSize="22"
                          FontWeight="Bold"
                          Foreground="Black"
                          Margin="0,0,0,12"/>

                      <Border Height="1"
                              Background="White"
                              Opacity="0.6"
                              Margin="0,0,0,12"/>

                      <ScrollViewer VerticalScrollBarVisibility="Auto">
                          <ItemsControl x:Name="DayAppointmentsControl">
                              <ItemsControl.ItemTemplate>
                                  <DataTemplate x:DataType="models:Appointment">
                                      <Border
                                          Background="White"
                                          CornerRadius="14"
                                          Padding="14"
                                          Margin="0,0,0,12"
                                          BorderBrush="#E0E0E0"
                                          BorderThickness="1">
                                          <StackPanel Spacing="6">
                                              <TextBlock Text="Doctor"
                                                         FontSize="12"
                                                         Foreground="Black"/>
                                              <TextBlock Text="{x:Bind Doctor.Name}"
                                                         FontWeight="Bold"
                                                         Foreground="Black"/>
                                          </StackPanel>
                                      </Border>
                                  </DataTemplate>
                              </ItemsControl.ItemTemplate>
                          </ItemsControl>
                      </ScrollViewer>
                  </StackPanel>
              </Border>
          </Grid>
      </Grid>
  </Grid>

usage:
  {"prompt_tokens":1964,"completion_tokens":2073,"cache_write_input_tokens":0,"cache_read_input_tokens":1664,"reasoning_tokens":1024}


id: 019d7764-5779-7285-8ac2-519e4857d942
conversation_id: 019d76fe-3b07-7095-acc1-ec6a2420f9f1
user_id: i301561
agent: App\Ai\Agents\CustomAgent
role: assistant
attachments: []
tool_calls: []
tool_results: []
meta: {"provider":"openai","model":"gpt-5","citations":[]}
created_at: 2026-04-10 14:35:57
updated_at: 2026-04-10 14:35:57
content:
  ```txt
  # Antwoord (in comments):
  # - Er bestaat (op dit moment) geen Filament v5. De laatste stabiele major is Filament v3.
  # - Mogelijk verwissel je versienummers met Laravel of Livewire.
  # - Hieronder manieren om je huidige Filament-versie te controleren en hoe je v3-specifieke login-extensie registreert.
  ```

  ```bash
  # Controleer je geïnstalleerde Filament-versie
  composer show filament/filament | grep versions

  # Alternatief
  composer show filament/filament
  ```

  ```json
  {
    // composer.json (uitsnede): zo ziet een recente v3 constraint er vaak uit
    "require": {
      "php": "^8.2",
      "filament/filament": "^3.2",
      // ...
    }
  }
  ```

  ```php
  <?php
  // Versie uitlezen in PHP (bijv. t.b.v. debug)
  use Composer\InstalledVersions;

  $version = \Composer\InstalledVersions::getPrettyVersion('filament/filament');
  dump($version);
  ```

  ```bash
  # Updaten naar de laatste v3 release (voorbeeld)
  composer require filament/filament:^3.0 --with-all-dependencies
  php artisan optimize:clear
  ```

  ```php
  <?php
  // Filament v3 — custom Login page correct extend'en en registreren
  // app/Filament/Auth/Login.php

  namespace App\Filament\Auth;

  use Filament\Facades\Filament;
  use Filament\Pages\Auth\Login as BaseLogin;

  class Login extends BaseLogin
  {
      protected function getRedirectUrl(): string
      {
          $user = auth()->user();

          if ($user && method_exists($user, 'defaultPanelId')) {
              $panelId = $user->defaultPanelId();
              return route("filament.{$panelId}.pages.dashboard");
          }

          return route('filament.' . Filament::getCurrentPanel()->getId() . '.pages.dashboard');
      }
  }
  ```

  ```php
  <?php
  // Filament v3 — registreer de custom Login page in je PanelProvider
  // app/Providers/Filament/AdminPanelProvider.php

  namespace App\Providers\Filament;

  use App\Filament\Auth\Login;
  use Filament\Panel;
  use Filament\PanelProvider;
  use Filament\Http\Middleware\Authenticate;

  class AdminPanelProvider extends PanelProvider
  {
      public function panel(Panel $panel): Panel
      {
          return $panel
              ->id('admin')
              ->path('admin')
              ->login(Login::class) // Laat Filament zelf de route registreren
              ->authMiddleware([
                  Authenticate::class,
              ]);
      }
  }
  ```

  ```php
  <?php
  // Filament v2 — (alleen ter referentie) andere base class + registratie via config
  // app/Filament/Auth/Login.php

  namespace App\Filament\Auth;

  use Filament\Http\Livewire\Auth\Login as BaseLogin; // v2 base class

  class Login extends BaseLogin
  {
      protected function getRedirectUrl(): string
      {
          $user = auth()->user();
          if ($user && method_exists($user, 'defaultPanelId')) {
              $panelId = $user->defaultPanelId();
              return route("filament.{$panelId}.pages.dashboard");
          }

          return route('filament.pages.dashboard');
      }
  }
  ```

  ```php
  <?php
  // config/filament.php (v2) — registreer je custom login component
  return [
      // ...
      'auth' => [
          'guard' => 'web',
          'pages' => [
              'login' => \App\Filament\Auth\Login::class,
          ],
      ],
  ];
  ```

  ```txt
  # Samengevat:
  # - Filament v5 bestaat (nog) niet; richt je implementatie op Filament v3.
  # - Gebruik in v3: extend Filament\Pages\Auth\Login en registreer via PanelProvider->login(...).
  # - Gebruik geen eigen Laravel routes naar je Login class; Filament regelt deze routes zelf.
  ```

usage:
  {"prompt_tokens":1270,"completion_tokens":1468,"cache_write_input_tokens":0,"cache_read_input_tokens":7168,"reasoning_tokens":576}


id: 019d7765-33ef-70aa-bf91-4110145cd3ec
conversation_id: 019d7757-a45f-7335-bf0c-57c11ab649fe
user_id: i287513
agent: App\Ai\Agents\CustomAgent
role: user
attachments: []
tool_calls: []
tool_results: []
usage: []
meta: []
created_at: 2026-04-10 14:36:54
updated_at: 2026-04-10 14:36:54
content:
  namespace CareTracker.Pages.Assistant
  {
      /// <summary>
      /// An empty page that can be used on its own or navigated to within a Frame.
      /// </summary>
      private AppDbContext _db = new AppDbContext();
      private DateTime _currentDate = DateTime.Today;
      private List _allAppointments;

      public AssistantPage()
      {
          this.InitializeComponent();

          LoadAppointments();

          LoadAllAppointmentsForCalendar();

          UpdateCalendarHeader();
      }

      private void LoadAppointments()
      {
          // Haal alle meldingen op uit de DB inclusief gerelateerde Machine & Delivery
          DayAppointmentsControl.ItemsSource = _db.Appointments
          .Include(a => a.Doctor)
          .OrderByDescending(a => a.DateTime)
          .ToList();
      }

      private void LoadAllAppointmentsForCalendar()
      {
          // Alle meldingen opslaan in een lijst om kalender te highlighten
          _allAppointments = _db.Appointments.ToList();
          Calendar.SelectedDates.Clear();
          Calendar.SetDisplayDate(new DateTimeOffset(_currentDate));
      }

      private void UpdateCalendarHeader()
      {
          // Maand en jaar tonen boven de kalender
          MonthYearText.Text = _currentDate.ToString("MMMM yyyy");
      }

      private void Calendar_DayItemChanging(CalendarView sender, CalendarViewDayItemChangingEventArgs args)
      {
          if (args.Item == null) return;

          text

          Kopiëren
      DateTime day = args.Item.Date.Date;

          //  Controleer of er meldingen zijn op deze dag
          bool hasAppointments = _allAppointments != null &&
              _allAppointments.Any(a => a.DateTime.HasValue && a.DateTime.Value.Date == day);

          if (hasAppointments)
          {
              //  Highlight dag met een rode rand en gouden achtergrond
              args.Item.BorderBrush = new SolidColorBrush(Microsoft.UI.Colors.Red);
              args.Item.BorderThickness = new Thickness(2);
              args.Item.Background = new SolidColorBrush(Microsoft.UI.ColorHelper.FromArgb(80, 255, 215, 0));
              try { args.Item.CornerRadius = new CornerRadius(20); } catch { }
          }
          else
          {
              //  Reset styling als er geen meldingen zijn
              args.Item.BorderBrush = null;
              args.Item.BorderThickness = new Thickness(0);
              args.Item.Background = null;
              try { args.Item.CornerRadius = new CornerRadius(0); } catch { }
          }
      }

      private void Calendar_SelectedDatesChanged(CalendarView sender, CalendarViewSelectedDatesChangedEventArgs args)
      {
          // Als een datum geselecteerd is, laad meldingen voor die dag
          if (sender.SelectedDates.Count > 0)
          {
              LoadAppointmentsForDate(sender.SelectedDates[0].Date);
          }
      }

      private void LoadAppointmentsForDate(DateTime date)
      {
          // Filter meldingen op exacte geselecteerde datum
          DayAppointmentsControl.ItemsSource = _db.Appointments
          .Where(a => a.DateTime.HasValue && a.DateTime.Value.Date == date.Date)
          .ToList();
      }

      private void PrevMonth_Click(object sender, RoutedEventArgs e)
      {
          // Ga naar vorige maand
          _currentDate = _currentDate.AddMonths(-1);
          Calendar.SetDisplayDate(new DateTimeOffset(_currentDate));
          UpdateCalendarHeader();
      }

      private void NextMonth_Click(object sender, RoutedEventArgs e)
      {
          // Ga naar volgende maand
          _currentDate = _currentDate.AddMonths(1);
          Calendar.SetDisplayDate(new DateTimeOffset(_currentDate));
          UpdateCalendarHeader();
      }

      private void PrevYear_Click(object sender, RoutedEventArgs e)
      {
          // Ga naar vorig jaar
          _currentDate = _currentDate.AddYears(-1);
          Calendar.SetDisplayDate(new DateTimeOffset(_currentDate));
          UpdateCalendarHeader();
      }

      private void NextYear_Click(object sender, RoutedEventArgs e)
      {
          // Ga naar volgend jaar
          _currentDate = _currentDate.AddYears(1);
          Calendar.SetDisplayDate(new DateTimeOffset(_currentDate));
          UpdateCalendarHeader();
      }
  }


id: 019d7765-33ff-7104-9c45-9df3c0c5a14c
conversation_id: 019d7757-a45f-7335-bf0c-57c11ab649fe
user_id: i287513
agent: App\Ai\Agents\CustomAgent
role: assistant
attachments: []
tool_calls: []
tool_results: []
meta: {"provider":"openai","model":"gpt-5","citations":[]}
created_at: 2026-04-10 14:36:54
updated_at: 2026-04-10 14:36:54
content:
  Below is a cleaned and compiling code-behind with English identifiers (comments kept in Dutch), the List fixed to a generic List<Appointment>, stray text removed, and names matching your XAML (Calendar, DayAppointmentsControl). Add or adjust the using for your actual Appointment/AppDbContext namespaces if needed.

  using System;
  using System.Collections.Generic;
  using System.Linq;
  using Microsoft.EntityFrameworkCore;
  using Microsoft.UI.Xaml;
  using Microsoft.UI.Xaml.Controls;
  using Microsoft.UI.Xaml.Media;
  // using CareTracker.Models; // <-- pas aan indien jouw Appointment in een andere namespace staat
  // using CareTracker.Data;   // <-- pas aan indien jouw AppDbContext in een andere namespace staat

  namespace CareTracker.Pages.Assistant
  {
      public sealed partial class AssistantPage : Page
      {
          private readonly AppDbContext _db = new AppDbContext();
          private DateTime _currentDate = DateTime.Today;
          private List<Appointment> _allAppointments;

          public AssistantPage()
          {
              this.InitializeComponent();

              LoadAppointments();
              LoadAllAppointmentsForCalendar();
              UpdateCalendarHeader();
          }

          private void LoadAppointments()
          {
              // Haal alle meldingen op uit de DB inclusief gerelateerde Machine & Delivery
              DayAppointmentsControl.ItemsSource = _db.Appointments
                  .Include(a => a.Doctor)
                  .OrderByDescending(a => a.DateTime)
                  .ToList();
          }

          private void LoadAllAppointmentsForCalendar()
          {
              // Alle meldingen opslaan in een lijst om kalender te highlighten
              _allAppointments = _db.Appointments.ToList();
              Calendar.SelectedDates.Clear();
              Calendar.SetDisplayDate(new DateTimeOffset(_currentDate));
          }

          private void UpdateCalendarHeader()
          {
              // Maand en jaar tonen boven de kalender
              MonthYearText.Text = _currentDate.ToString("MMMM yyyy");
          }

          private void Calendar_DayItemChanging(CalendarView sender, CalendarViewDayItemChangingEventArgs args)
          {
              if (args.Item == null) return;

              DateTime day = args.Item.Date.Date;

              // Controleer of er meldingen zijn op deze dag
              bool hasAppointments = _allAppointments != null &&
                                     _allAppointments.Any(a => a.DateTime.HasValue && a.DateTime.Value.Date == day);

              if (hasAppointments)
              {
                  // Highlight dag met een rode rand en gouden achtergrond
                  args.Item.BorderBrush = new SolidColorBrush(Microsoft.UI.Colors.Red);
                  args.Item.BorderThickness = new Thickness(2);
                  args.Item.Background = new SolidColorBrush(Microsoft.UI.ColorHelper.FromArgb(80, 255, 215, 0));
                  try { args.Item.CornerRadius = new CornerRadius(20); } catch { }
              }
              else
              {
                  // Reset styling als er geen meldingen zijn
                  args.Item.BorderBrush = null;
                  args.Item.BorderThickness = new Thickness(0);
                  args.Item.Background = null;
                  try { args.Item.CornerRadius = new CornerRadius(0); } catch { }
              }
          }

          private void Calendar_SelectedDatesChanged(CalendarView sender, CalendarViewSelectedDatesChangedEventArgs args)
          {
              // Als een datum geselecteerd is, laad meldingen voor die dag
              if (sender.SelectedDates.Count > 0)
              {
                  LoadAppointmentsForDate(sender.SelectedDates[0].Date);
              }
          }

          private void LoadAppointmentsForDate(DateTime date)
          {
              // Filter meldingen op exacte geselecteerde datum
              DayAppointmentsControl.ItemsSource = _db.Appointments
                  .Where(a => a.DateTime.HasValue && a.DateTime.Value.Date == date.Date)
                  .ToList();
          }

          private void PrevMonth_Click(object sender, RoutedEventArgs e)
          {
              // Ga naar vorige maand
              _currentDate = _currentDate.AddMonths(-1);
              Calendar.SetDisplayDate(new DateTimeOffset(_currentDate));
              UpdateCalendarHeader();
          }

          private void NextMonth_Click(object sender, RoutedEventArgs e)
          {
              // Ga naar volgende maand
              _currentDate = _currentDate.AddMonths(1);
              Calendar.SetDisplayDate(new DateTimeOffset(_currentDate));
              UpdateCalendarHeader();
          }

          private void PrevYear_Click(object sender, RoutedEventArgs e)
          {
              // Ga naar vorig jaar
              _currentDate = _currentDate.AddYears(-1);
              Calendar.SetDisplayDate(new DateTimeOffset(_currentDate));
              UpdateCalendarHeader();
          }

          private void NextYear_Click(object sender, RoutedEventArgs e)
          {
              // Ga naar volgend jaar
              _currentDate = _currentDate.AddYears(1);
              Calendar.SetDisplayDate(new DateTimeOffset(_currentDate));
              UpdateCalendarHeader();
          }

          private void BackToMaintenanceDashboard(object sender, RoutedEventArgs e)
          {
              // Navigeer terug naar het dashboard
              // Frame.Navigate(typeof(MaintenanceDashboardPage));
          }
      }
  }

usage:
  {"prompt_tokens":1917,"completion_tokens":2843,"cache_write_input_tokens":0,"cache_read_input_tokens":3584,"reasoning_tokens":1792}


id: 019d7766-69ab-737c-b091-38f3b7dd9a0e
conversation_id: 019d7757-a45f-7335-bf0c-57c11ab649fe
user_id: i287513
agent: App\Ai\Agents\CustomAgent
role: assistant
attachments: []
tool_calls: []
tool_results: []
meta: {"provider":"openai","model":"gpt-5","citations":[]}
created_at: 2026-04-10 14:38:13
updated_at: 2026-04-10 14:38:13
content:
  Use a generic List with the correct entity type and import the right namespaces.

  Do this:
  - Add at the top:
    using System.Collections.Generic;
    using CareTracker.Models; // pas aan naar de namespace waar Appointment staat

  - Change the field to:
    private List<Appointment> _allAppointments = new();

  Als je nog steeds een fout krijgt op Appointment, kijk in je AppDbContext welke type je DbSet gebruikt. Bijvoorbeeld, als je hebt:
    public DbSet<MaintenanceAppointment> Appointments { get; set; }
  dan moet je veld zijn:
    private List<MaintenanceAppointment> _allAppointments = new();

  Eventueel kun je ook volledig kwalificeren zonder extra using:
    private List<CareTracker.Models.Appointment> _allAppointments = new();

usage:
  {"prompt_tokens":6557,"completion_tokens":1247,"cache_write_input_tokens":0,"cache_read_input_tokens":0,"reasoning_tokens":1024}


id: 019d7766-d9fb-71c4-abb4-ed8044b76e71
conversation_id: 019d7766-d9f1-71d3-aede-23241a41684e
user_id: i302789
agent: App\Ai\Agents\CustomAgent
role: user
attachments: []
tool_calls: []
tool_results: []
usage: []
meta: []
created_at: 2026-04-10 14:38:42
updated_at: 2026-04-10 14:38:42
content:
  <?php

  namespace App\Http\Livewire;

  use Livewire\Component;
  use App\Models\Blog;
  use Illuminate\Support\Str;
  use Illuminate\Support\Facades\Storage;

  new class extends Component
  {
      public $blogs = [];

      public function mount(Blog $blog)
      {
          $this->blogs = $blog;

          $this->fill($blog->only('title'));
      }
      
  }

  ?>

  <div>
      {{-- Simplicity is an acquired taste. - Katharine Gerould --}}
  </div>


  <div style="display: flex; align-items: center; justify-content: center;">
      <div class="carousel relative">
      <div class="carousel-inner flex overflow-hidden">
          <div class="carousel-item w-full bg-blue-500 text-white flex justify-center items-center h-64">
          Slide 1
          </div>
          <div class="carousel-item w-full bg-green-500 text-white flex justify-center items-center h-64">
          Slide 2
          </div>
          <div class="carousel-item w-full bg-red-500 text-white flex justify-center items-center h-64">
          Slide 3
          </div>
      </div>
          <button class="prev absolute left-0 top-1/2 transform -translate-y-1/2 bg-gray-800 text-white px-3 py-1">Prev</button>
          <button class="next absolute right-0 top-1/2 transform -translate-y-1/2 bg-gray-800 text-white px-3 py-1">Next</button>
      </div>
  </div>

  this is totally wrong, help me


id: 019d7766-da05-7169-b292-63fa182e0793
conversation_id: 019d7766-d9f1-71d3-aede-23241a41684e
user_id: i302789
agent: App\Ai\Agents\CustomAgent
role: assistant
attachments: []
tool_calls: []
tool_results: []
meta: {"provider":"openai","model":"gpt-5","citations":[]}
created_at: 2026-04-10 14:38:42
updated_at: 2026-04-10 14:38:42
content:
  Je hebt een paar dingen door elkaar gehaald. Wat er misgaat:

  - Je mengt een (anonieme) Livewire component class en Blade-view in één bestand, maar niet volgens het juiste patroon. In Livewire v2/v3 “klassiek” gebruik je een aparte PHP-class + aparte Blade-view. In Livewire v3/Volt kun je wel één bestand gebruiken, maar dan moet je Volt’s Component gebruiken (Livewire\Volt\Component), niet Livewire\Component.
  - $blogs is gedeclareerd als array, maar je stopt er een Blog-model in. Maak er óf een enkele $blog van, óf een Collection/array met meerdere blogs.
  - $this->fill($blog->only('title')) werkt alleen als je een public $title property hebt. Die ontbreekt nu.
  - Je importeert Str en Storage maar gebruikt ze niet.
  - Je knoppen (Prev/Next) hebben geen gedrag. Voeg wire:click methods (Livewire) of JavaScript (bijv. Alpine) toe.
  - Als je geen Volt gebruikt, ontbreekt een render() methode in de component class.

  Kies één van de twee werkwijzen hieronder.

  Optie A — Klassieke Livewire component (aparte class + view)

  1) app/Http/Livewire/BlogCarousel.php

  <?php

  namespace App\Http\Livewire;

  use Livewire\Component;
  use App\Models\Blog;
  use Illuminate\Support\Collection;

  class BlogCarousel extends Component
  {
      public Collection $blogs;
      public int $active = 0;

      // Optioneel: laat 1 specifieke Blog binnenkomen, anders pak je er een paar
      public function mount(Blog $blog = null): void
      {
          $this->blogs = $blog
              ? collect([$blog])
              : Blog::latest()->take(3)->get();
      }

      public function next(): void
      {
          if ($this->blogs->count() === 0) return;
          $this->active = ($this->active + 1) % $this->blogs->count();
      }

      public function prev(): void
      {
          if ($this->blogs->count() === 0) return;
          $this->active = ($this->active - 1 + $this->blogs->count()) % $this->blogs->count();
      }

      public function render()
      {
          return view('livewire.blog-carousel');
      }
  }

  2) resources/views/livewire/blog-carousel.blade.php

  <div style="display: flex; align-items: center; justify-content: center;">
    <div class="carousel relative w-full max-w-3xl">
      <div class="carousel-inner relative w-full overflow-hidden">
        @forelse($blogs as $i => $b)
          <div class="carousel-item w-full {{ $active === $i ? 'block' : 'hidden' }} bg-blue-500 text-white flex justify-center items-center h-64">
            {{ $b->title ?? 'Slide ' . ($i + 1) }}
          </div>
        @empty
          <div class="w-full bg-gray-200 text-gray-700 flex justify-center items-center h-64">
            Geen blogs gevonden
          </div>
        @endforelse
      </div>

      <button wire:click="prev" class="prev absolute left-0 top-1/2 -translate-y-1/2 bg-gray-800 text-white px-3 py-1">Prev</button>
      <button wire:click="next" class="next absolute right-0 top-1/2 -translate-y-1/2 bg-gray-800 text-white px-3 py-1">Next</button>
    </div>
  </div>

  Gebruik in een Blade-pagina:
  <livewire:blog-carousel />
  of met een specifieke blog:
  <livewire:blog-carousel :blog="$blog" />

  Optie B — Livewire 3 Volt (één bestand)

  Plaats dit in resources/views/livewire/blog-carousel.blade.php:

  <?php

  use Livewire\Volt\Component;
  use App\Models\Blog;
  use Illuminate\Support\Collection;

  new class extends Component {
      public Collection $blogs;
      public int $active = 0;

      public function mount(Blog $blog = null): void
      {
          $this->blogs = $blog
              ? collect([$blog])
              : Blog::latest()->take(3)->get();
      }

      public function next(): void
      {
          if ($this->blogs->count() === 0) return;
          $this->active = ($this->active + 1) % $this->blogs->count();
      }

      public function prev(): void
      {
          if ($this->blogs->count() === 0) return;
          $this->active = ($this->active - 1 + $this->blogs->count()) % $this->blogs->count();
      }
  };

  ?>

  <div style="display: flex; align-items: center; justify-content: center;">
    <div class="carousel relative w-full max-w-3xl">
      <div class="carousel-inner relative w-full overflow-hidden">
        @forelse($blogs as $i => $b)
          <div class="carousel-item w-full {{ $active === $i ? 'block' : 'hidden' }} bg-blue-500 text-white flex justify-center items-center h-64">
            {{ $b->title ?? 'Slide ' . ($i + 1) }}
          </div>
        @empty
          <div class="w-full bg-gray-200 text-gray-700 flex justify-center items-center h-64">
            Geen blogs gevonden
          </div>
        @endforelse
      </div>

      <button wire:click="prev" class="prev absolute left-0 top-1/2 -translate-y-1/2 bg-gray-800 text-white px-3 py-1">Prev</button>
      <button wire:click="next" class="next absolute right-0 top-1/2 -translate-y-1/2 bg-gray-800 text-white px-3 py-1">Next</button>
    </div>
  </div>

  Belangrijke notities:
  - Verwijder ongebruikte imports (Str, Storage).
  - Gebruik ofwel een enkele $blog property of een Collection $blogs (zoals hierboven).
  - $this->fill(...) alleen gebruiken als je de bijbehorende public properties hebt gedefinieerd (bijv. public string $title = '';). In deze carousel is dat niet nodig.
  - De knoppen werken nu via wire:click en Livewire methods, dus je hebt geen extra JS nodig.

  Laat me weten:
  - Werk je met Livewire v2 of v3 (Volt)? 
  - Wil je specifieke velden (bijv. afbeelding/slug) in de slides tonen of alleen de titel? 
  Dan pas ik het voorbeeld precies aan jouw use-case.

usage:
  {"prompt_tokens":361,"completion_tokens":3563,"cache_write_input_tokens":0,"cache_read_input_tokens":0,"reasoning_tokens":2112}


